Jump to content

Weber Smokey Mountain Cooker Smoker

Blue2500CC

By Blue2500CC
in Garage, Shop & Tools

Recommended Posts

Blue2500CC Enthusiast

Blue2500CC

Posted
Posted

Anyone have one? I have been looking at one of these ( 18.5" or 22.5"- not sure which yet ) to add to the gas grill. I have found the tvwbb.com forum which is the Forum for Weber Grills like this site is for our trucks! I also know the Smokering, Amazing Ribs, and the BBQ-Brethren forums as well.

 

I lean toward the 18.5" when I consider hauling it with us when we go camping, though I don't carry much in the bed of the truck, so the 22.5" would probably fit as well. Then I think about ribs ( without cutting them up ) and maybe trying my hand at a beef brisket as well which don't fit as well on the 18.5". Decisions, decisions!!!

 

Just wondering if any fellow members here have one, and which model you chose and why?

 

TY!

Chris

brantjs Enthusiast

brantjs

Posted
Posted

I have the 18.5". Haven't tried a brisket yet, but I've done ribs, butts, chickens, turkeys, and a couple other things. Love it. I usually do 3 racks of ribs at a time. I cut the racks in half and use one of the rib racks that you stack the ribs in. i could probably fit double that. Other than not trying a brisket, I haven't had a problem with space so far.

Blue2500CC Enthusiast

Blue2500CC

Posted
  • Author
Posted

How large of a turkey have you smoked? Were you able to lay it down or did you have to stand it up? MOST of the time when we have turkey it is maybe 14lbs. I may even try to find a couple slightly smaller turkey 10lbs or so, and smoke one, and deep fry the other!

 

As for ribs, I don't have an issue if I have to cut them in half, and have considered a rack as well.

 

Probably 90% of the time the 18.5" will be more than big enough, just trying to make sure ( over analyze maybe??? Lol ) that the infamous "Should have gone bigger!" doesn't happen!

 

TY!

brantjs Enthusiast

brantjs

Posted
Posted

I have done about a 17 pound or so turkey on the top shelf laid down, and you could probably go quite a bit larger if you needed to. If you buy a fullsize brisket you might not be able to fit it without cutting, but I was looking at the grocery store yesterday and you can definitely find smaller portions. I'm excited...doing some ribs tomorrow on it.

  • 3 weeks later...
Blue2500CC Enthusiast

Blue2500CC

Posted
  • Author
Posted

How did the ribs turn out? Do you have any mods done to your wsm?

 

18.5" was ordered yesterday! Can't wait!!!

 

Chris

brantjs Enthusiast

brantjs

Posted
Posted

Ribs came out awesome, from what I can remember (had a couple too many beverages that day). I just used the 'best ribs in the universe' recipe off virtualweberbullet.com with cherry for smoke wood. I have no mods, other than I don't bother with the heat shield underneath. I am strongly considering a pitmaster iq110 for the longer runs, but it holds temp really well as is most of the time, and the pitmaster is not inexpensive.

Blue2500CC Enthusiast

Blue2500CC

Posted
  • Author
Posted

Glad to hear the ribs were good!

 

Debating on what to try for my first smoke! It has been a while since I have used charcoal, and I read ribs are tough for a first smoke???? Not really sure why though.

 

Thinking maybe a couple mods, temp grommets, maybe handles for the mid section, etc. Just basic ones.

 

Probably going to order a Maverick ET 732 tonight.

brantjs Enthusiast

brantjs

Posted
Posted

If you follow the directions for any of the recipes on virtualweberbullet.com you will turn out fine. I did ribs for the first smoke and had no problems. The smoker will likely run hot for the first smoke or two, but you can choke down the vents easily enough to stay where you need to. If you don't have one already, get a weber chimney starter for the charcoal. Some people swear by lump hardwood charcoal. I've heard that the temperature is sometimes harder to control with it, but I haven't tried it. Regular kingsford is all I use. Not sure what you would want handles on the mid section for? Other than finishing chicken directly over the coals, I never take the mid section off when it's hot, and I would think handles would mess up the fit of the cover if you leave it outside, but I'm just guessing on that. That's a pretty fancy thermometer you're getting. The only thing I've used a thermometer for is Boston butt, and I have a fairly inexpensive Taylor 'instant read' for that. My wife informed me today that I'm doing a chicken after work on Friday...takes 1/2 hour to get it set up and hot, 1 hour to cook, and 1/2 hour to clean when it's all cooled down...hardly worth it for that short of cooking time but who am I to argue.

  • 2 weeks later...
Blue2500CC Enthusiast

Blue2500CC

Posted
  • Author
Posted

Haven't been on in a bit, Sorry!!!

 

Brantjs,

 

How did the chicken turn out?

 

I have read so much on the TWBB that stuff is "mixing" together!!! Lol Have read that it may run hot the first couple times or so, but TY for the heads up as well!

 

Tomorrow is the big day! Have a pork loin thawing that is from "Porky", which I got on a game ranch. Wish I had some Apple wood, but do have a bag of Cherry wood so that should be ok. Planning on a Lemmon Pepper rub. I got a chimney starter free from a buddy who said he will never use it again. It isn't the Weber, but for free it should get me started.

 

The handle idea is for the few times you may need to add charcoal, and since it is tougher on the 18" w/ the small door, just lift the mid section. Going to wait on that for now though.

 

When Home Depot had the 2-20lb bags of KBB for $9.99 about a month ago, I bought 5 packs, so I should be set with 200lbs of charcoal for a while. Not sure if I will try lump or not. Have a lot to learn still at this point!

 

Az,

 

TY for the link! I have been on that site as well. As I mentioned, I need to stop reading for a few due to information overload! Lol

 

Hope the weather holds out!

brantjs Enthusiast

brantjs

Posted
Posted

Chicken turned out great (as usual). I cheated and just put the Stubbs BBQ rub on it instead of making my own, then finished it with Sweet Baby Ray's. I have a Weber grill, and have most of the Weber grilling cookbooks. If you haven't tried the Weber books, everything I've tried out of them has tasted great and come out perfect since they base all the cooking times and temp settings on their grills. They also have a bunch of marinade and rub mixtures in the front of the books, which is what I'll usually pick from if I'm grilling or smoking.

 

I think I've only ever added charcoal once, towards the end of a 12 hour cook. I can't say it was real convenient (I have the 18" too), but it wasn't too bad to take the door off and just toss pieces of charcoal in by hand, and move them where I wanted with a stick.

 

Good luck w/ your pork loin, let us know how it turned out! I haven't tried a pork loin on the smoker yet. I haven't tried apple wood yet either. I do woodworking stuff as well, so I've got more cherry cutoffs than I can smoke in 5 years. Also have plenty of oak, which is mild and does well too. A friend of mine did his kitchen with hickory, so I have some hickory scraps as well but haven't tried it.

Blue2500CC Enthusiast

Blue2500CC

Posted
  • Author
Posted

TY for the Weber Books tip! Will have to look into them! Is there one you would suggest for the first?

 

First smoke is under my belt as of yesterday! The pork loin, with a butter infused olive oil w/ a garlic pepper rub, turned out great!

 

Of course a couple pics!

 

th_7e01a5b6be910120fa565b06f287189b_zps4

 

Smoked w/ cherry wood!

 

th_bdbb0d66e0404fdbe918322ac57f51e6_zps9

 

TY for all the help! Temp stayed pretty consisntent, just edging above 280* near the end, & that was with the smoker in full sun from about 1/2 way on!

 

Heading north to the in-laws this coming w/e, may take the wsm with, just not sure what to cook.

 

TY again!

Chris

Blue2500CC Enthusiast

Blue2500CC

Posted
  • Author
Posted

Up at the in-laws in Northern Mi, and smoked a couple pork loins, both stuffed with bacon, caramelized onions, and cheese in one (can't remember what my wife used-she helped prep) , with a butter infused olive oil and garlic pepper dry rub! Turned out great smoked with apple and cherry!

 

th_78807a4079fb0e13fc14447a60537a5e_zps5

 

th_279f51aea1fb5829981b8dd9017929b0_zps5

 

Now to decide what the next cook will be!!!

  • 3 years later...
Blue2500CC Enthusiast

Blue2500CC

Posted
  • Author
Posted

Hard to believe how long it's been since I bought the 18" WSM!!! Still loving it when time allows for low and slow.

 

The 18" is just large enough that it doesn't fit in the truck bed with the lid on due to the cab high topper. Otherwise, hauling it isn't to bad. BUT to make it easier, I picked up the 14" WSM to take with and strictly use the 18" at home. So far I have smoked a couple pork butts on the 14" trying to get it "broke in". I figured for the $50 price tag for a brand new 14" WSM, I couldn't pass it up!!!

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Jus Cruisin
      2027 GMC Sierra: Official Discussion

      By Jus Cruisin · Posted

      I was the GM of a Lincoln Mercury dealership back in the 80's. The service lot was always full with "broken" ones. Plenty of transmissions, power windows and a/c repairs. The only one I'd consider owning would be the Marauder at this point and it certainly wouldn't be a daily driver.  My 2025 GMC Sierra 1500 Denali Ultimate is my "Lincoln Town Car" in my retirement. I want all the "stuff". Big infotainment screens, one touch power windows, Supercruise (I won't buy another vehicle without it), hands free pretty much everything. I'm going to swap my current truck for a 2027 Yukon Denali Ultimate so I can have the air suspension and surround vision recording along with all the other "stuff". 
    • Byrds8
      Ac not keeping up

      By Byrds8 · Posted

      Yep mine is on backorder also.
    • smit303
      2027 GMC Sierra: Official Discussion

      By smit303 · Posted

      The Denali Ultimate's grille is tinted, but the "regular' Denali has a bright chrome grille like the current models.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      Because that is IDIOTIC, much like this question. They've already been forced to do it by past administrations - why would you roll that back when it's a GOOD thing?  WHO IS ARGUING FOR LOWER MILEAGE???? 😂  NOBODY IS!!   I'm certainly not! What I want is RELIABLE vehicles again that are worth the price paid!    I don't get your logic here ...   In 2003 I paid $2,200 for our '86 Grand Marquis. It's STILL running and I've never been inside the engine, aside for the timing cover since it was leaking, so I threw a new timing set in since that makes sense. Transmission is ORIGINAL. Electric pump in the gas tank is ORIGINAL. Rear end is ORIGINAL. I'd have to hit my head REAL hard to want to pay $60k or more for a car that still can't come close to the comfort, seating and storage space, or reliability of this one. Nothing is even in the ball park! Hundreds of thousands of brands and models have been built and sent to the crusher while this one keeps on going!   https://postimg.cc/Z9XRrCSg   I've got a whole fleet of cars, motorcycles, and a truck close to this age for summer and winter. No one could pay me enough to buy anything built this century. I have zero use for any it.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      Since I'm the one who has to fix them when they break, I'll take vehicles over 30 years old all day, EVERY day, over ANY modern crap. Have you attempted any repairs on anything built after 2006? It's a friggin nightmare, and gets worse the newer the model year.    If I had the will or desire, I can make any car of any age outside of a Model T (I don't have THAT much will ...) just as powerful, comfortable, and have all the tech the new stuff does, and get pretty close in mileage, too. I prefer SIMPLICITY. The less the vehicle has, the less to fix WHEN it breaks, not IF.   I'm glad you snot-nosed punks don't like them. More for us, plus that keeps the prices from climbing more than they already have.👍

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...