Jump to content

Recommended Posts

Posted

How do you post a picture? I've tried going to attach file but no picture comes out when i select the picture i want.

 

 

Use a photo upload site ( Flickr, Photbucket etc. ) to upload the pictures you want to use, and then copy the IMG link on each picture, then paste it into the comment box here.

  • Like 1
Posted

24096746560_b42da986b8_z.jpg2015 Sierra 6.2L by Josh Clark, on Flickr

 

This is the one I was going to get before I bought what I have. It's a 2015 6.2L Sierra, custom wheels and tires, N-Fab steps I believe is what they were... The only thing that stopped me was it's a 2015 with over 40,000 miles already and wanted $39k.

  • Like 2
Posted

Thanks! I kept on trying and it went through lol.

 

Lol good deal man. What brand are those wheels?

Posted

Fuel Assault

 

Nice. They look good, I've never seen them before ( That I recall ). I've got to get some for mine already.

Posted (edited)

post-146834-145692729968_thumb.jpg

 

Picture of my truck after a wash the other day. House renovations have put customizing on hold unfortunately.

 

Not sure why it post the image sideways....

 

Sent from my SAMSUNG-SM-N920A using Tapatalk

post-146834-145692729968_thumb.jpg

post-146834-145692729968_thumb.jpg

post-146834-145692729968_thumb.jpg

Edited by Rymack10
  • Like 1
Posted

Was Cleaning my wheels the other day and an Idea Popped into my head... On my OEM 22's, I have an Indentation in the middle of the 6 spokes... The idea was to use the Same Vinyl Wrap I used when I covered my Bow Ties to Fill in these Indentations... Can also Play with the center cap... What's your thoughts...

 

post-140277-0-38235900-1456942923_thumb.jpgpost-140277-0-73834500-1456942328_thumb.jpgpost-140277-0-58226900-1456942672_thumb.jpg

post-140277-0-73834500-1456942328_thumb.jpg

post-140277-0-58226900-1456942672_thumb.jpg

post-140277-0-38235900-1456942923_thumb.jpg

post-140277-0-73834500-1456942328_thumb.jpg

post-140277-0-58226900-1456942672_thumb.jpg

post-140277-0-38235900-1456942923_thumb.jpg

post-140277-0-73834500-1456942328_thumb.jpg

post-140277-0-58226900-1456942672_thumb.jpg

post-140277-0-38235900-1456942923_thumb.jpg

  • Like 1
Posted (edited)

Was Cleaning my wheels the other day and an Idea Popped into my head... On my OEM 22's, I have an Indentation in the middle of the 6 spokes... The idea was to use the Same Vinyl Wrap I used when I covered my Bow Ties to Fill in these Indentations... Can also Play with the center cap... What's your thoughts...

 

attachicon.gifCapture2.JPGattachicon.gif2015-03-22 03.49.12 wheels 2.jpgattachicon.gifCapture.JPG

 

 

So up close to the wheel, this looks really awesome, so much so that I only saw the preview to this thread on tapatalk(it was your wheel) and I had to come comment on it, but When backed away looking at the entire truck, not so much.

 

I think doing this with black vinyl instead of red and it'd look killer up close and at a distance[emoji1362]

 

 

- Mike

IG: @BlackPearl_Edition

Edited by Mike1220
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined
  • Who's Online   2 Members, 0 Anonymous, 1,509 Guests (See full list)


  • Latest Articles

  • Posts

    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
    • Do you have access to BP fuels? Some stations have Silver 91 E-0 priced the same as their 93 E-10.  There is a local Marathon with 90 alky free for $6 a gallon but I go down the road to BP for $5-ish. They also have a 100 E-0 but that stuff is $10 a pop. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...