Mopar Combustion Chamber Cleaner - Anybody use on a GM?

[Mossyoakglock]

I know this is a Mopar product but I've heard great things about it. Has anybody used it?

 

From what I've heard the Seafoam only gets the back cylinders on our trucks when going through the brake booster line and I don't really feel like sucking liquid through there. With the MCCC it's a foam and is supposed to get all cylinders, etc. I'm getting a very small puff a bluish smoke out my tailpipe after my truck sits for about two days (it's been in the low 30's here too) so I want to try that first and clean everything out.

[Carder09]

Seafoam deep creep works the same.

[desrtrat]

Seafoam deep creep works the same.

X2

spray thru the TB..also deep creep works better than pb blaster on rusted/stuck hardware. will not evaporate when using a torch..good stuff..

[Mossyoakglock]

I'll try the Deep Creep then. Much easier to get than the MCCC since there is not a dealer close to me.

 

The Deep Creep is the one that has the hose to help introduce it into the manifold, correct? Will it be fine doing it by myself? I won't have anybody their to help me tonight. I guess I could just spray until it almost dies, back off and repeat.

[Carder09]

Follow the directions to a T with deep creep. Check YouTube as well. Can potentially be bad for motor if you are not precise with the stuff. But I may be wrong, just follow directions and you should be fine.

[mike94silverado]

I use the MCCC on everything!

[demech23]

I have visually see Chrysler A-Tech's use MCCC, and when asked if any good they swear buy it. In addition, one time when it temproroly went on warehouse backorder one of them bought a whole case of it.