Bed differences between 2013 and 2014

[jenga]

What are the difference between the two years? Bed stack pockets, stake pockets spacing, width, lengths, etc..

 

I found locally on Craigslist a topper and tonneau cover that I am interested in but not sure if they would work. The tonneua cover is from a 2009 short bed and the topper from a 2010 Short bed crew cab.

 

I looked up the tonneua cover manufactured and they list a separate version for 2014 using newer mounting hardware on the interior of the bed versus the stake pockets.

 

Thanks,

 

[MikeNH]

I don't think the stake pockets are readily accessible on the new trucks.

[MotoMedic]

Interior bed sheet metal is the same. Exterior (including rail tops) and stake holes are different.

 

My Roll-Bak bed cover transferred perfectly from my GMT-900 to my new K2 using the same hardware. Can't speak about other brands.

[[email protected]]

My BakFlip G2 transferred totally fine as well from my 2009 to 2014

[jenga]

The one on Craigslist is a fold-a-cover G4 Elite Cover & Caddy Bundle | 07-13 GM Silverado/Sierra 5ft 8in bed (GM4924+PC0). For $250, I might try to see if I can make it work if the stack pockets are similar. I did notice the 14 has the bed caps all around versus the earlier one that just had the tailgate.

[RyanbabZ71]

Maybe contact the company and see if it fits I am sure they will be 100% sure one way or another

 

 

Ryan

[2017SierraSLT]

The rear most stake pocket holes are now larger to also act as grab areas when you use the new step bumper.

[17TXLTZ]

Might be bringing this one back to life, didn't want to start a new thread...

 

Anyone else transferred old tonneau covers (2007-2013) to a 2014+ crew cab short box? I purchased a used Roll n Lock of Offer Up and the guy supposedly had it on a 2014+, but when I contacted Roll N Lock to purchase missing parts, they identified that it was for a 2007-2013 truck and it will not fit...a little bummed out if that's the case...

[Lee Day]

Will the bed from a 2015 chev fit my 2013 chev