Chevyrcg’s 2014 Silverado LT Double Cab Build

[Mike1220]

which company do you own? i want to wrap my center console insert like yours and possibly a few trim pieces and would like to give the business to ya

[Chevyrcg]

which company do you own? i want to wrap my center console insert like yours and possibly a few trim pieces and would like to give the business to ya

I am in Rode island, can’t tell where you are from because you don’t have it listed. I will however tell you that we have the same birthday, I am just a few years older! If you want I can send you the material if you are not close to me.

[Chevyrcg]

Did a little embroidery project today:

3D Puff embroidery

[Mike1220]

I am in Rode island, can’t tell where you are from because you don’t have it listed. I will however tell you that we have the same birthday, I am just a few years older! If you want I can send you the material if you are not close to me.

 

I am from Louisiana haha, so not too close haha. And how much would the material be? I am very much liking how your trim pieces are coming out. Much better than the stock "carbon" look that comes on the AT package. And very nice embroidery on the headrests! Are you planning on doing the ones for the back seat as well?

[Chevyrcg]

 

I am from Louisiana haha, so not too close haha. And how much would the material be? I am very much liking how your trim pieces are coming out. Much better than the stock "carbon" look that comes on the AT package. And very nice embroidery on the headrests! Are you planning on doing the ones for the back seat as well?

 

 

I am from Louisiana haha, so not too close haha. And how much would the material be? I am very much liking how your trim pieces are coming out. Much better than the stock "carbon" look that comes on the AT package. And very nice embroidery on the headrests! Are you planning on doing the ones for the back seat as well?

Yeah I would say a little far to be bringing it to me… LOL… I can send you a piece of it if you want to try it out and see if you are up to doing it yourself. It’s 3m carbon fiber 1080, as far as vinyl goes it’s a little pricey, about $4.10 a square foot. but you can do a lot with it, I used the scrap from the panels I did on the doors to do the steering wheel. If you do the DIC surround, you will have a pretty big piece left over from the center of it that you can probably do the corner pieces on the back doors with, or at least one of them. If you have a reusable sign shop near you you could see what they would charge to do it for you. I just happen to be lucky to be in the business and into doing custom stuff to my vehicles.

 

Yes, i plan on doing the back headrests as well, I have a file of a smaller Bowtie that I use for them. I was getting bored so i did the fronts today. I’ve done this on 4 other trucks I have had. One of them I used Glow in the Dark thread, that was pretty cool!.

[Chevyrcg]

 

Yeah I would say a little far to be bringing it to me… LOL… I can send you a piece of it if you want to try it out and see if you are up to doing it yourself. It’s 3m carbon fiber 1080, as far as vinyl goes it’s a little pricey, about $4.10 a square foot. but you can do a lot with it, I used the scrap from the panels I did on the doors to do the steering wheel. If you do the DIC surround, you will have a pretty big piece left over from the center of it that you can probably do the corner pieces on the back doors with, or at least one of them. If you have a reusable sign shop near you you could see what they would charge to do it for you. I just happen to be lucky to be in the business and into doing custom stuff to my vehicles.

 

Yes, i plan on doing the back headrests as well, I have a file of a smaller Bowtie that I use for them. I was getting bored so i did the fronts today. I’ve done this on 4 other trucks I have had. One of them I used Glow in the Dark thread, that was pretty cool!.

If you want to send me your head rests I’ll do them for you…. pretty much put whatever you want on them if you don’t want Bowties!

[Mike1220]

 

Yeah I would say a little far to be bringing it to me… LOL… I can send you a piece of it if you want to try it out and see if you are up to doing it yourself. It’s 3m carbon fiber 1080, as far as vinyl goes it’s a little pricey, about $4.10 a square foot. but you can do a lot with it, I used the scrap from the panels I did on the doors to do the steering wheel. If you do the DIC surround, you will have a pretty big piece left over from the center of it that you can probably do the corner pieces on the back doors with, or at least one of them. If you have a reusable sign shop near you you could see what they would charge to do it for you. I just happen to be lucky to be in the business and into doing custom stuff to my vehicles.

 

Yes, i plan on doing the back headrests as well, I have a file of a smaller Bowtie that I use for them. I was getting bored so i did the fronts today. I’ve done this on 4 other trucks I have had. One of them I used Glow in the Dark thread, that was pretty cool!.

 

 

Eh a bit pricey, but hey, quality isn't cheap, so I don't mind shelling out the money. That stuff looks very much worth it, and I am a fan of carbon fiber.

 

I am planning to first do the center console insert. And will probably order 2 square ft so I can do some experimenting with ideas on what to wrap.

 

Got a website I can go look at?

[Mike1220]

 

Yeah I would say a little far to be bringing it to me… LOL… I can send you a piece of it if you want to try it out and see if you are up to doing it yourself. It’s 3m carbon fiber 1080, as far as vinyl goes it’s a little pricey, about $4.10 a square foot. but you can do a lot with it, I used the scrap from the panels I did on the doors to do the steering wheel. If you do the DIC surround, you will have a pretty big piece left over from the center of it that you can probably do the corner pieces on the back doors with, or at least one of them. If you have a reusable sign shop near you you could see what they would charge to do it for you. I just happen to be lucky to be in the business and into doing custom stuff to my vehicles.

 

Yes, i plan on doing the back headrests as well, I have a file of a smaller Bowtie that I use for them. I was getting bored so i did the fronts today. I’ve done this on 4 other trucks I have had. One of them I used Glow in the Dark thread, that was pretty cool!.

 

That sounds pretty cool! Got any pictures of the glow in the dark embroidery? I'm a bit curious of how it looked.

Eh a bit pricey, but hey, quality isn't cheap, so I don't mind shelling out the money. That stuff looks very much worth it, and I am a fan of carbon fiber.

 

I am planning to first do the center console insert. And will probably order 2 square ft so I can do some experimenting with ideas on what to wrap.

And about installation, I will try it myself first, if I don't feel like it is going on well enough due to my error, I can bring it to a mobile tint and audio shop about 15 minutes from my house. I am going to have them tint my windows soon since I know the owner and want the windows darker.

 

Got a website I can go look at?

[ckrimits]

I have been salivating over your ride. literally! I'm a carbon fiber freak. what you've done to that truck is phenomenal. I don't know where to begin. I got my truck 2 months ago, and I'm waiting till august when to put some rims on and a level lift kit. also debating which bed cover to get, been going back and forth. I have my mind set on the identical tires you put on, put deciding between 2 different types of Fuel rims, and the Rock star that you have on. I'm glad to see that you have multiple pics with them and the exact tire gives me a better idea of what my truck would look like. the exhaust is sick! do you mind me asking what that ran you $? I would really be interested in some of that carbon fiber from you. may I pm you? thanks keep up the great work. also. how did you blackout the from badges? plasti dip? and the Matte finish visors are 10x better. and original for that matter. I think you might be in the wrong business.

-Chris

[Chevyrcg]

Installed Driver’s Side Grab Handle:

 

 

[AZ Nikko]

Very jealous of the Carbon Fiber interior mods! Looking awesome

[Chevyrcg]

Very jealous of the Carbon Fiber interior mods! Looking awesome

Do it up man, I can sell you the vinyl to do it at my cost… I own a graphics company. let me know if you are interested!

 

Thanks for the compliments .

[JonRyan]

Hey man that carbon interior is looking sweet! Would it even be worth trying for someone with no experience in vinyl, I wouldn't want it to look bad.

 

How does glow in the dark thread look in the sunlight? Grey or something?

[Daryl LBZ]

Looks great! I like those rain guards wrapped in the matte vinyl.

[Chevyrcg]

Looks great! I like those rain guards wrapped in the matte vinyl.

Thanks D!