aftermarket headlights 2014 silverado/sierra

[corwest]

I'm pretty confident you will be happier all around with the RX350 over the FX-R. Not to mention the cakewalk it is to mount them.

[Gmcant33]

Where are the sierra guys

 

Sorry for going of topic but where did u get ur grille?? And was the price worth it and quality wise.

[Arcolog2]

Yea it sucks cause I have the fxr's already that I purchased from TRS. Shipping is a pain from hawaii, but it's valentine's day so screw it lmao. Maybe I will make the fogs out of the fxr, or try my hand at outing them in the stock LT housings for someone. Who knows.

 

So just need the 350's and the non afs brackets, and a little reworking of the bowl and done. Thanks man

[darkfox1]

I'm not finding anything about this, I know this is more about hid than just aftermarket general, has anyone seen these?

 

http://www.headlightsdepot.com/products.php?sku=GM625-B101L&gclid=CKq53MDC6sMCFbBj7AodPhcAgg#.VOQCifnF_VU

 

they're apparently from a company called Eagle. I dont know about the product or that website, but I do want the projector headlight factor look without the crazy factory cost. I also don't want to reduce my light output. If anything I need more out in the rural roads where I live.

 

Whattyall think?

[TB3546]

I'm not finding anything about this, I know this is more about hid than just aftermarket general, has anyone seen these?

 

http://www.headlightsdepot.com/products.php?sku=GM625-B101L&gclid=CKq53MDC6sMCFbBj7AodPhcAgg#.VOQCifnF_VU

 

they're apparently from a company called Eagle. I dont know about the product or that website, but I do want the projector headlight factor look without the crazy factory cost. I also don't want to reduce my light output. If anything I need more out in the rural roads where I live.

 

Whattyall think?

I have them and love them! Well worth the money and half the price of OEM. I have DDM 5K HIDS and the projectors have a nice crisp cut off line.

[corwest]

I'm not finding anything about this, I know this is more about hid than just aftermarket general, has anyone seen these?

 

http://www.headlightsdepot.com/products.php?sku=GM625-B101L&gclid=CKq53MDC6sMCFbBj7AodPhcAgg#.VOQCifnF_VU

 

they're apparently from a company called Eagle. I dont know about the product or that website, but I do want the projector headlight factor look without the crazy factory cost. I also don't want to reduce my light output. If anything I need more out in the rural roads where I live.

 

Whattyall think?

Got these from eBay for 375 a set. Pretty nice and the projector they come with isn't terrible either. (Still prefer an OEM HID upgrade of course.)

[Arcolog2]

I'm not finding anything about this, I know this is more about hid than just aftermarket general, has anyone seen these?

 

http://www.headlightsdepot.com/products.php?sku=GM625-B101L&gclid=CKq53MDC6sMCFbBj7AodPhcAgg#.VOQCifnF_VU

 

they're apparently from a company called Eagle. I dont know about the product or that website, but I do want the projector headlight factor look without the crazy factory cost. I also don't want to reduce my light output. If anything I need more out in the rural roads where I live.

 

Whattyall think?

Yup! Eagle Eyes is the company. Projector isn't half bad at all. I paid quite a bit more than 400 for both but it's due to shipping. Didn't realize how big a box it would be lmao.

 

Just realize that you cannot install the FX-R projector as easily as the factory GM housings. Corwest has found the rx-350 projectors with the afs adapter plates bolt up the easiest.

[corwest]

Yup! Eagle Eyes is the company. Projector isn't half bad at all. I paid quite a bit more than 400 for both but it's due to shipping. Didn't realize how big a box it would be lmao.

 

Just realize that you cannot install the FX-R projector as easily as the factory GM housings. Corwest has found the rx-350 projectors with the afs adapter plates bolt up the easiest.

This is true. The RX-350 is the easiest option for an OEM setup for this Headlight. There is minor cutting involved with the housing and projector but very easy to do. If you do go OEM route, I highly suggest getting the Mitsubishi gen IV ballasts to compliment the projectors as they have a very good mounting solution that I can give details on if you like.

[TB3546]

 

My Eagle Eye, OEM style headlights.

[Arcolog2]

This is true. The RX-350 is the easiest option for an OEM setup for this Headlight. There is minor cutting involved with the housing and projector but very easy to do. If you do go OEM route, I highly suggest getting the Mitsubishi gen IV ballasts to compliment the projectors as they have a very good mounting solution that I can give details on if you like.

I'd love to hear about it. I'm waiting on TRS to process my return request for the fxr's. But being there is a 20% restock fee, I might not return them after all. Up to them if they want me to return $110 to spend $230, we shall see!

[avalonandl]

These are not really set up for the 2500. My 2500 LTZ does not have black accent stripe between the upper and lowers lights.

[hogwash]

That's because they are for the 1500 only.

 

 

These are not really set up for the 2500. My 2500 LTZ does not have black accent stripe between the upper and lowers lights.

[RobZ71LM7]

Anyone have a picture of these with HID's? Particularly the cutoff?

[sawyer_dowell_3]

 

Finally found some of the anzo gmc installed. I think they look pretty good. What do yall think??

[Stallion225]

Anyone have a picture of these with HID's? Particularly the cutoff?

 

 

Sent from my iPhone using Tapatalk