Jump to content

Recommended Posts

Posted

Would like to hear more on this.  Mine does the same when cold over speed bumps leaving in the morning.

Posted

My 2015 4x4 Z71 has only started doing this since the temps here in Dallas have stayed below freezing for the past 3-4 days. Creaking noise from the front left spring at all speeds until the vehicle warms up for gets 5-10 minutes of driving time in. Then its gone until the next startup. 

 

I haven't really driven this truck in temps this cold for this long so I'm not too concerned but I guess if it is the sway bar bushings that's good to know what the cause is at least. 

Posted

Yes, it is the extreme cold. You will probably notice that after a few minutes of driving, the creaking goes away.

I have a '16 Crew Cab and it does the same thing. Driving out of my neighborhood, the front suspension will creak over all of the speed bumps. Once I get to work 15 minutes later, it won't creak over the speed bumps at my work. This happens when temperatures get below freezing. I had a F150 that did the same exact thing.

Once the suspension works and loosens up after a few minutes, all of the noises should go away.

This is a non-issue.


Sent from my LG-H932 using Tapatalk

Posted

Check sway bar bushings. My 15 did this, thought it was coming from control arm shock/strut area, but it was actually the bushings. Changed them and no more squeak even when it hit -50 last year and -37 so far this year.

Sent from my SM-G935V using Tapatalk

Posted (edited)

What bushing replacements did you go with?  To me, it sounds more like the spring rubbing against its dampner.

Edited by Austin66
Posted
What bushing replacements did you go with?  To me, it sounds more like the spring rubbing against its dampner.
Energy Suspension bushings. I lifted the truck and got underneath it as friends pushed up and down on tires and that's where the noise was coming from on mine so changed them out and the sound has never come back.

Sent from my SM-G935V using Tapatalk

Posted

I have the same problem since it has been around 0 degrees here for a couple weeks.  I made a video for the dealer and they heard in the video and they couldn't replicate it.  When I picked it up I drove it over a curb to show them the noise which is there but not very bad when its above 0 degrees.  I also took to a shop nearby and they didn't hear it and all bushings looked ok.  He said to come back if the noise comes back when it is colder.

It was 12 below yesterday and I am hearing it again also when I am turning sometimes.  I can't tell if it is coming from the control arm bushing or sway bar bushings or end links.  Since I have a lift on the dealer will not cover anything and they are just guessing its the upper control arm bushings on both sides.  If I put 1 wheel on the curb and roll off no noise.  I only hear it with both wheels rolling off a tall curb which makes me think maybe control arm bushing.

 

Posted (edited)
19 hours ago, Bash74 said:

Energy Suspension bushings. I lifted the truck and got underneath it as friends pushed up and down on tires and that's where the noise was coming from on mine so changed them out and the sound has never come back.

Sent from my SM-G935V using Tapatalk
 

Bash74, my sway bar is a 34mm. Any chance you have more info on the sway bar bushings from Energy Suspension? Sway bar diameter or part number? 

Edited by Muddy72
Posted

Came across this thread today.   It's been unusually cold here in central Florida.  It was 27F yesterday morning on my way to work.  I've been hearing an odd creaking type noise from the front suspension since the cold weather showed up down here.   And on the job site I hear it also.   I did not know it was temp related.  So this thread saved me the headache of chasing a noise down.  It's the cold. 

Posted

Yes. This is nothing but a cold weather noise. When it gets cold enough, the suspension components contract and tighten up. If it's not extremely cold, you should stop hearing the creaking noise after driving a couple miles.

Same thing happened in my F150 and if you Google this, there are thousands of threads from many vehicle types that cover this same issue.

Stop worrying so much guys.

These forums have some of you tripping. I should know, they once had me tripping so bad, I was looking for shit to find wrong with my vehicles.

Sent from my LG-H932 using Tapatalk

Posted
Bash74, my sway bar is a 34mm. Any chance you have more info on the sway bar bushings from Energy Suspension? Sway bar diameter or part number? 
Sorry don't have the one for energy suspension because I picked them up from a 4x4 shop. Now the ones i put on a friends truck recently where the Dorman 531-608 from summit racing, but I thought the bar is 36mm if I remember correctly. His has no squeak at all either when it hit -30 a few weeks ago. Lub with marine based Teflon grease

Sent from my SM-G935V using Tapatalk

Posted

Bash74, Thanks for the reply! Sounds like your friend has the other size sway bar as there are 34 and 36mm sway bars. I'm going to level my truck in a couple weeks and I'm wanting to do the sway bar bushings and end links at the same time. I have Energy Suspensions end links ready to go. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,914
    Total Members
    8,960
    Most Online
    AidenVorpagel
    Newest Member
    AidenVorpagel
    Joined
  • Who's Online   3 Members, 0 Anonymous, 1,307 Guests (See full list)


  • Latest Articles

  • Posts

    • 10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • 286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...