Jump to content

how are the michelin off road tires in the snow?


Recommended Posts

Posted

i really looked hard to get the "off road" package on my truck but i hope the tires were worth it. are they good in the snow? the survey on tire rack seem to make them sound pretty good.

Posted

I got the Michelin 17" on my dually and they are shit

the AT not all season

they have a snow flake on them but still no good , got my self a set of duratrac goodyears with studs and after 20k kms still look like new

Posted

I didn't think they were all that great this last winter in some moderate drifts and such. Not quite enough bite. For average snow on most road surfaces, they weren't shabby. But take them onto back roads and such that county maintenance crews schedule for last efforts, and you will be a little disappointed. I have no problem with them running up and down muddy gravel roads, across rough and tilled crop land, thru moderate ditches, hillside terraces, and such that I frequent on my property, but they would not be my first choice for serious snow work. I will be considering another tire for next winter. Not a big Goodyear fan, but am taking a look at the Wrangler AT Adventure with Kevlar tire as a direct replacement for the stock Michelins.

Posted

Depends on what your definition of snow is... On snow pack they are better than most, loose snow not so much.

 

My next set will probably be Cooper ATW.

Posted

I was underwhelmed with my set of Michelin AT2s. For most people that have to have an all terrain tire and will never go off road, they are excellent. They track well, are light weight, have low rolling resistance, fairly quiet, and get good traction on wet roads. In other words AT tire look and label without giving up highway tire characteristics.

 

The few times I had them on snowy stuff I found that the clogged up pretty quickly and didn't do any better than a highway tire.

Posted

Decent at best, about average for a car like all-terrian tire.

 

For snow I have yet to see a tire that beats a Goodyear Duratrac.

Posted

Decent at best, about average for a car like all-terrian tire.

 

For snow I have yet to see a tire that beats a Goodyear Duratrac.

 

 

bet your ass that they are the best

Posted

Well, I dearly am fond of the Michelin's on my semi truck, but the ones on my 2015 2500HD are a big yawn. Michelin claims the outlast other tires on gravel by 25%. Well, we'll see. Mine have to run up and down gravel roads every time it moves just to get to a highway to go to town. And maybe that is the primary reason I have left them on there so far, just to see if that is true.

Posted

Decent at best, about average for a car like all-terrian tire.

 

For snow I have yet to see a tire that beats a Goodyear Duratrac.

I take it you've never been on a real snow tire? :lol:
Posted

I take it you've never been on a real snow tire? :lol:

We are not talking or comparing snow tires.

 

Not everyone wants to run a extra set of wheels and swap to snow tires, our climate here in Indiana would never justify a dedicated snow tire as it is 80* and sunny one day and a foot of snow the next. Making the Duratrac the best tire.

 

I don't work for Goodyear nor do I like Goodyear, they just so happen to make one good tire.

Posted

Cooper discoverer St Maxx had a little better ice traction than the Duratracs and were a little quieter. But just my opinion. Liked the At2's I had on my Dmax but found they wore out fast.

Posted

I decided to take a little more look at what is available. I have not cared for the BFG All Terrain T/A's, as they had lack luster performance in serious snow. I have just been reading info on the new T/A KO2 tires that BFG has out now. Some very positive comments from folks regarding snow performance. May have to take a closer look at the BFG All Terrain T/A KO2 tires. They now have the Mountain Snow emblem on the tires.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,791
    Total Members
    8,960
    Most Online
    d.lowrey
    Newest Member
    d.lowrey
    Joined
  • Who's Online   2 Members, 1 Anonymous, 3,233 Guests (See full list)

  • Latest Articles

  • Posts

    • Just did an injector/HPFP replacement on Pepper at 192,400 miles; close enough to 200K, RIGHT? (If 200K is considered life end and to me it isn't). But hey, to each his own.    Have never run a catch can on this vehicle. Back side of every valve looked like a new valve spray painted semigloss black. Port walls looked 'neat' (all a normal result of passive EGR via VVT) Zero build up even in AFM cylinders. Just color. It uses no measurable oil and never has.    At 155,000 I put her on E-85 and a borescope of the cylinders at plug change showed very clean pistons and valve faces. The replaced injector tips looked new. (It was the pump piston seal that was leaking). Oh well, have six good backups.    Still gets 28 mpg on gas (highway average) and over 20 (highway) on alky. UOA's look good and runs as good now as it did when I bought it. Better in fact.    What improvement would a Catch Can provide this motor?     And given all this I expect that IF I installed one I'd see some water/gas/oil vapor accumulation. Byproducts of normal combustion.   Having said that, IF my motor used an appreciable amount of oil I'd consider it a useful 'crutch' until I had the situation corrected OR if bore polished, until I junked it or rebuilt it to stave off repeated plug fouling.    I'm not telling you what I THINK. But what its DONE.          
    • Love the look. I'm a SCSB lover myself.    Two items. 1.) A spacer changes scrub radius but this also changes when we use wheels of different offsets. A little isn't a big deal. 2.) Steel wheels, alloy wheels all have different thickness. Same effect on the stud and lug nut as a spacer. When hub centric the wheel isn't supported by the stud. It's supported by the hub. The stud just keeps it all together.  
    • I had a evap sol go bad a couple weeks ago. . I replaced it.  While watching live data at the time I saw I had some cylinder 1 misfires. No MIL but on live data I could see ~50 at startup and about 70 more after an hour a drive all on cyl 1.  I also noticed that the LTFT were -5% to -15% always.  And that bank 2 is always -3% richer than bank 1. Even across all driving modes, city, highway, etc it’s always 3% richer than bank 1. So I start with the misfire. Swapped coil, plug, and plug wires from 1 to 3. No follow. I got an Injector reseal kit, pulled the D/s injector rail, swapped #1 and #3 injectors, resealed them, reinstalled and retested.  The misfire followed to 3. So I ordered and replaced all 8 injectors, spark plugs, and plug wires. Also replaced the 1 time use fuel pipes under the intake manifold.  Injectors that were in the truck since new were  Part # 12668390.  I replaced them with # 12742701 Got from RockAuto. Pretty certain they’re genuine and the correct ones. I called a friend at a parts store who told me “the 12742701 were the correct superseded part # for the originals I was replacing”. So started truck after replacing all that and it’s running -15 - -30 LTFTs. I reset the fuel trims with GDS2 and drove it for a 60 miles trip each way. There have been no changes in the LTFTs.  I checked if the HPFP was leaking into the crankcase. I removed the pvc and watched the trims. No difference.  I checked the alcohol content and it was at 10%  I’m out of ideas here. Truck seems to run great. Just always rich on the fuel trims.  Anyone with any help or ideas would be greatly appreciated.  I ran an injector balance test just for the heck of it and it came back this. I’m confused.  I have gds2 and some other diag tools if anyone knows of anything I should test next.
    • Definitely needs to go back to the dealer. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...