Jump to content

Recommended Posts

Posted

After tons of forum stalking I finally pulled the trigger. Here's my 2017 All Terrain with a Zone 4.5" lift on 35x12.5r20 Cooper STT Pro tires and powder coated OEM All Terrain wheels. I can confirm there is no rubbing and no trimming was required (only had to remove the front lower valance)

 

Y5nd2.jpg

zK9Ey.jpg

RN9fh.jpg

RN9fh.jpg

Did you have to use spacers?

 

 

Sent from my iPhone using Tapatalk

Posted

looks good to me. I too had to hold off on a lift and wheels. love the idea of lift/wheels but wallet said no along with my girlfriendLOL

Just put a set of the wildpeak son my Denali, they are a great looking tire.

Posted

What did powder coating run ya?

I paid $150 a wheel. Basic colors like flat black are about $75. The color I chose is called crystal metallic and it has a great metallic dark grey look to it

 

 

Sent from my iPhone using Tapatalk

Posted

Did you have to use spacers?

 

 

Sent from my iPhone using Tapatalk

No spacers. The front wheels stick out I’d say about 3/4” and the rears are basically flush. The difference didn’t bother me enough to use spacers on the rear for looks alone.

 

 

Sent from my iPhone using Tapatalk

  • 2 weeks later...
Posted

c3695bc3c72d9fe4715ad8fd60f6bdc4.jpg


Sent from my iPhone using Tapatalk

  • Like 2
Posted

This is from a local shop in GA. I plan on taking my 2014 SLT  in after it gets out of body shop. It got broken into at the airport while on a business trip. 

Price is good but trying to decide on TIres. Leaning towards the Toyo Open Country R/T. My Nitto All-terrains have been good but want something more aggressive and not so stiff. The Toyo's have an E rating for 35x12.5's 

 

Lifted truck.png

  • Like 3
Posted (edited)

Here is mine with stock 22’s and 35 inch toyo  open country mt

406C8C53-6B7E-4076-B04F-D9257492E784.jpeg

Edited by Husek302
  • Like 3
Posted
On 10/24/2017 at 8:18 PM, RHStansbury said:

Details on the lift/level and tires, please.

I was curious about the specs too b/c this is the look I want...  I found what he posted in the leveling thread on it...

 

 

Posted

RHstansbury & Chuckleberry thanks! I'm running the Rough Country 2.5IN GM LEVELING LIFT KIT (07-18 1500 PU) comes with 2.5" up front and 1" of lift blocks over the factory. Seems to me like I'm sitting a bit nose high though. So I bought the 3" blocks and you need to buy the longer UBOLTS 9/16 to make it work. I didnt do any trimming at all! Thought I was going to have to cut some of the inner liner out but I can even run my mudflaps so pretty happy about that. Keep the rocks down.

Posted
7 hours ago, Chuckleberry said:

I was curious about the specs too b/c this is the look I want...  I found what he posted in the leveling thread on it...

 

 

RHstansbury & Chuckleberry thanks! I'm running the Rough Country 2.5IN GM LEVELING LIFT KIT (07-18 1500 PU) comes with 2.5" up front and 1" of lift blocks over the factory. Seems to me like I'm sitting a bit nose high though. So I bought the 3" blocks and you need to buy the longer UBOLTS 9/16 to make it work. I didnt do any trimming at all! Thought I was going to have to cut some of the inner liner out but I can even run my mudflaps so pretty happy about that. Keep the rocks down.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,623 Guests (See full list)


  • Latest Articles

  • Posts

    • I’m definitely interested to hear the end result here. 
    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...