Camber Adjustment Maxed Out.

NEMESIS-A/T · May 17, 2016

Ive tried asking this question in a other threads, but this in its self is the root question.

Are there any aftermarket Camber adjustments products out there for the 2014-2016?

I called all the Upper control arm companies, Cognito, Zone, ect... None of them would say they added any camber help with there upper control arms.

So my problem is I have a 6.5" lift then I added Bilstien 5100 set at 1.25". So now my Camber is maxed out in its adjustment yet im still 1 Degree Positive still. I need something to help me get my camber near zeroed out or even a bit negative.

Donstar · May 17, 2016

If you go to the next lower setting on the Bilstein, would that make a difference?

fondupot · May 17, 2016

So you stacked a lift kit with a bilstein lift? No wonder you have no camber left. That's not how those are supposed to be run...

NEMESIS-A/T · May 17, 2016

I dont go with the norm. Its not a big deal to stack a lift. People do it all the time. I did the same thing on my Tacoma With a spindle lift and Bilstiens. The tacoma aftermarket made a adjustable upper control are that would add or subtract camber. The Problem is that there is no aftermarket camber product for these trucks that I can find or know of.

thearizonacowboy · May 17, 2016

Did you call Dirt King and ask about their UCAs? (619) 944-8913

Rme2513 · May 17, 2016

What's holding you back from more adjustment the keeper or does it start going back positive ?

NEMESIS-A/T · May 18, 2016

What's holding you back from more adjustment the keeper or does it start going back positive ?

I guess it the keeper. The pin is maxed out in one direction.

Did you call Dirt King and ask about their UCAs? (619) 944-8913

No I havent tried them. I will in the morning. Thanks.

Rme2513 · May 18, 2016

Cut the keeper in a way so that the pin want stop it so you can get more adjustment but make sure the a arm is not hitting the frame afterwards but it also might start going back positive just have to try it and see