Jump to content

Recommended Posts

Posted

After seeing all of the disgusting cabin air filter pictures, it would be nice to head this off. Does anyone know where the air intake location is ? Just got a 2016 and being in a heavily treed area that is full of rodents of all sizes, would like to make a screen to pre-filter this air. Thanks.

  • Like 1
Posted

No way a rodent is making into that intake system. It is on the wiper cowl.

Posted

Did it get changed for 2016 ? All the posted pictures speak for themselves, MICE, LEAVES, STICKS, could start a campfire with all the stuff collected off the top of these filters.

Posted (edited)

Did it get changed for 2016 ? All the posted pictures speak for themselves, MICE, LEAVES, STICKS, could start a campfire with all the stuff collected off the top of these filters.

 

That doesn't fall through the grate though. If you've got sticks and mice, they aren't coming through the cowl plastic screen, they are coming in from under it right through the intake sheetmetal. And they will probably get through the screen too lol.

Edited by 15HDriver
  • 1 month later...
Posted

I see this thread died but wanted to reopen the question. I just purchased a 2017 sierra crew 1500 slt. The last truck i bought (which i still own) was a 2006 lt3 Silverado crew with the duramax. I live in a wooded area and have had major mouse issues. My 2006 was a haven for mice. To this day i have never found how the get into my cab. And am worried they will get into my new truck. My 2006 had no cabin filter so i tore apart the cowling only to discover the intake was already screened so the mice were not getting in through there. In my 2006 however large the opening its big enough for a mouse caught in a glue trap to still pull himself out (this has happened twice) without me being able to find him. The only logical opening was the rear body vents that exot between the bed and cab but that is the one place i have never found them. Side note over the course of 2 days last year i caught 11 mice in the cab of my truck.

 

My wife has a 2014 sienna with car seats and lots of food crumbs from the kids. When we first got it the mice started getting in. But i found that the air intake was not screened. I put a wire mesh over it and since then have never had another mouse inside.

 

Would be nice if there was anyone who could advise the potential openings for mice in these Silverados and potentially the new sierras. Btw i own a car lift and have had my truck in the air and not found the entry point.

 

Cab fresh and dryer sheets under the hood don't really work either.

Posted

UPDATE: Just last week I was cleaning out the last of the falling leaf debris, getting ready for winter, when I noticed a squareish rubber plug with 2 nipples on it, laying loose by the fender and the battery. Not having any idea where this thing came from, got me to looking. Turns out both ends of the firewall, up top by the black windshield wiper trough have these flapper type vents, like the type in the back of cab. The passenger side fell out, thats what was laying by the fender. With a mechanic mirror and a light could see where this thing goes. Reason it FELL off is, holes are too big, or nipples are too small,or both. Was fun trying to get these nipples back in the holes blind. ONLY TO HAVE IT FALL RIGHT BACK OUT. Some silicone adhesive fixed that. Now with that rubber plug out, the whole mouse family could dance the jig as they went through there. I KNEW there had to be a way people were getting those mulch piles on top of their cabin air filters. I found mine, yous may vary.

  • Like 1
Posted

Good info. Having mice get into the vehicle much less chewing up the wires inside or out is a huge issue for many.

Posted

UPDATE: Just last week I was cleaning out the last of the falling leaf debris, getting ready for winter, when I noticed a squareish rubber plug with 2 nipples on it, laying loose by the fender and the battery. Not having any idea where this thing came from, got me to looking. Turns out both ends of the firewall, up top by the black windshield wiper trough have these flapper type vents, like the type in the back of cab. The passenger side fell out, thats what was laying by the fender. With a mechanic mirror and a light could see where this thing goes. Reason it FELL off is, holes are too big, or nipples are too small,or both. Was fun trying to get these nipples back in the holes blind. ONLY TO HAVE IT FALL RIGHT BACK OUT. Some silicone adhesive fixed that. Now with that rubber plug out, the whole mouse family could dance the jig as they went through there. I KNEW there had to be a way people were getting those mulch piles on top of their cabin air filters. I found mine, yous may vary.

Did you happen to take a pic of this rubber plug? Is your truck a 2016 1500? Sounds like you may have stumbled onto a possibly important issue here Mr SwampThing..

Posted

S

 

I see this thread died but wanted to reopen the question. I just purchased a 2017 sierra crew 1500 slt. The last truck i bought (which i still own) was a 2006 lt3 Silverado crew with the duramax. I live in a wooded area and have had major mouse issues. My 2006 was a haven for mice. To this day i have never found how the get into my cab. And am worried they will get into my new truck. My 2006 had no cabin filter so i tore apart the cowling only to discover the intake was already screened so the mice were not getting in through there. In my 2006 however large the opening its big enough for a mouse caught in a glue trap to still pull himself out (this has happened twice) without me being able to find him. The only logical opening was the rear body vents that exot between the bed and cab but that is the one place i have never found them. Side note over the course of 2 days last year i caught 11 mice in the cab of my truck.

My wife has a 2014 sienna with car seats and lots of food crumbs from the kids. When we first got it the mice started getting in. But i found that the air intake was not screened. I put a wire mesh over it and since then have never had another mouse inside.

Would be nice if there was anyone who could advise the potential openings for mice in these Silverados and potentially the new sierras. Btw i own a car lift and have had my truck in the air and not found the entry point.

Cab fresh and dryer sheets under the hood don't really work either.

sounds like you need some outdoor cats. That will fix your problem.

Posted

After seeing all of the disgusting cabin air filter pictures, it would be nice to head this off. Does anyone know where the air intake location is ? Just got a 2016 and being in a heavily treed area that is full of rodents of all sizes, would like to make a screen to pre-filter this air. Thanks.

Wow I'm glad I saw this thread and comment. After just 15k miles, garage kept, this filter is still dirty as hell.

post-148733-0-30583200-1481146144_thumb.jpg

post-148733-0-30583200-1481146144_thumb.jpg

post-148733-0-30583200-1481146144_thumb.jpg

post-148733-0-30583200-1481146144_thumb.jpg

Posted

The filter doesn't get dirty by sitting it the garage, it gets dirty when you go out and drive it :cheers:

  • Like 2
Posted

Wow I'm glad I saw this thread and comment. After just 15k miles, garage kept, this filter is still dirty as hell.

did you stage that pic by putting dirt on that filter? haha that is disgusting

Posted (edited)

The filter doesn't get dirty by sitting it the garage, it gets dirty when you go out and drive it :cheers:

 

Haha, yeah I reread some of the posts here, and my idea of how leaves get into and on the cabin air filter was quite wrong. I pictured a vehicle sitting outside somehow being more prone to crap falling in,, but that isn't how that works lol.

Edited by 2015_Sierra

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • The timing marks are ok, that is #1, you can turn it over until they line up and it won't change anything, the crankshaft turns twice for every camshaft revolution, I have always set up SB Chevs as your pic shows using a straight edge
    • Someone's been here before.... There is a receipt for a 3-piece timing set, purchased earlier this year.   Is this picture something, or, nothing?   I have the timing cover off and my crank is perfectly TDC and the keyed gear's locating mark is dead on 12 o'clock.   The cam gear locating mark is also at 12 o'clock. Now, I'm not an expert, but all the install guides say the two locating marks should meet and be perfectly aligned when installing a timing set. The mark on the crank should be dead on 12:00 and the cam gear's mark should be dead on 6:00, and both marks should be perfectly vertically aligned.   I believe the timing gear is keyed or has a dowel that ensures it can only be installed on the cam in one position, so I have to believe the cam is out of phase somehow. At the very least, with a triangular bolt pattern, it can only be installed in one of 3 different positions.   Before I pulled the front cover, the truck was running alright, no service engine soon lights except an occasional P0172 / rich condition. Timing -16 timing at idle (should be +16), and total -35% fuel trim, two conditions I haven't been able to figure out.   In related news, my injector tested pretty well, wasn't leaking, but I had it rebuilt anyway, and it's on it's way back to me.         Along with this discovery, the good and bad:   Good: The oil pan seal appears undamaged.   Bad: -The timing cover has been reused, and the positioning dowels have been broken. That could explain some of the leaking. -Some kind of white paste or grease was used to try to seal the oil pan seal and timing cover (since wiped off..). -Then, someone globbed silicone all over the front of the cover and also buried the ckp sensor in it. But, they didn't put any inside the cover or use RTV to try to seal the oil pan seal with the timing cover (good).
    • The guy that owns K&P filters last I checked in with him has over 300,000 miles on his Dodge base Hemi using his own 35 micron absolute stainless mesh filter from its first oil change.    The GM study I've posted a dozen times shows the relationship in engine life based in multiples of base units, not miles or years. That is the base unit is the number of miles the motor ran using the reference filter efficiency.    The above two paragraphs dismantle anecdotal arguments IF one changes oil often enough to prevent particle formation and the motor is in otherwise good shape. That is not full of silica (no air filter) or suffering a metallurgical issue that is not part of the lubrication discussion. Poor heat treat in example.   Data from UOA's I've reviewed from more than a few engines can show remarkably broad variations in oil cleanliness using the exact same filter over the course of an engines life.     Lastly there is the common sense of it. Wear debris WILL circulate the engine BEFORE it ever sees a filter in route to that filter and WILL harm the pump which NEVER sees filtered oil.    Alpha question then becomes, given the facts, how long do you believe is a reasonable service life from a vehicle you are certain you will not pass down? That is the junk yard will be it's resting place when you're done with it? (the moral issue most don't care about).    Omega question is then how diligent are you prepared to be in general mechanical, air & oil maintenance? Preventing particulates and keeping them sufficiently dilute; preventing the precursors from generation, amalgamation and precipitation.    If I get a good look at the engine bay of a vehicle I have a fair idea of the owners commitment to the inside of the power train. That 30 micron WIX is still more efficient than a sieve.                 
    • It also depends on what criteria someone is using for “best” when talking filters.  Are we going off best efficiency?   Best quality/QC?  Etc. because the two may not mutually exclusive.  
    • They’re not the same wiz as 10-15 years ago.  QC has fallen pretty hard.  The XP line was never good though in the first place.    https://bobistheoilguy.com/forums/threads/wix-filter-rusted-through.386492/post-6991372   https://bobistheoilguy.com/forums/threads/i-ve-used-my-last-wix-filter.27299/   https://bobistheoilguy.com/forums/threads/looking-for-a-better-replacement-for-wix-51258.403977/   https://bobistheoilguy.com/forums/threads/convince-me-in-using-the-purolator-boss.401537/post-7420147   the forums are littered with posts and examples of not great wix filters the last couple years 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...