Jump to content

Recommended Posts

Posted (edited)

did you stage that pic by putting dirt on that filter? haha that is disgusting

Nope! I was surprised with the fuzz that was piled up in that corner. I clearly need to do this every 10k miles (or less), instead of every 15-17k.

 

When I pulled out the filter, a leaf fell off the back of the filter and down into the blower motor. I didn't realize it until I fired the fan up full blast and it started making a buzzing sound. Had to pull the new filter back out, and wedge my hand in there and pull it out. I was lucky I didn't have to take the blower motor out just to get it.

Edited by 2015_Sierra
Posted

 

Haha, yeah I reread some of the posts here, and my idea of how leaves get into and on the cabin air filter was quite wrong. I pictured a vehicle sitting outside somehow being more prone to crap falling in,, but that isn't how that works lol.

Its all good, just playin.

Posted

So I took a video scope under the window under the hood of my truck and found that there is absolutely nothing to prevent a mouse from getting inside and into the filter which they can easily eat through. So within the next week I'm going to dismantle and fix a screen to prevent it any mice or large leaves from getting into the cabin. I'll take some pictures and videos and post them

Posted

Will you be able to clean that screen off that you are going to put in?

Posted

So I took a video scope under the window under the hood of my truck and found that there is absolutely nothing to prevent a mouse from getting inside and into the filter which they can easily eat through. So within the next week I'm going to dismantle and fix a screen to prevent it any mice or large leaves from getting into the cabin. I'll take some pictures and videos and post them

 

Looking forward to see what you come up with.

Posted

Will you be able to clean that screen off that you are going to put in?

That's probably the only part I am concerned about. I have an IPA Air Comb which is like a long blow gun with sideways air pressure which i should be able to get in there and place enough pressure to dislodge any leaves etc. Ultimately, if i had too i'll hard plumb an air hose with a quick disconnect...that i can hook onto periodically. Anything would be better than the alternative....

  • 1 month later...
Posted

Nope! I was surprised with the fuzz that was piled up in that corner. I clearly need to do this every 10k miles (or less), instead of every 15-17k.

 

When I pulled out the filter, a leaf fell off the back of the filter and down into the blower motor. I didn't realize it until I fired the fan up full blast and it started making a buzzing sound. Had to pull the new filter back out, and wedge my hand in there and pull it out. I was lucky I didn't have to take the blower motor out just to get it.

After reading these posts I decided to check mine truck seeing as we spent last summer in CT where the truck was parked outside. Sure as hell, the filter was full of crap along with a mice nest and about a 1000 mice turds...nice to know I had been breathing this for a couple of months

......that little ball of lint you found is a mouse nest....

  • Like 1
Posted

After reading these posts I decided to check mine truck seeing as we spent last summer in CT where the truck was parked outside. Sure as hell, the filter was full of crap along with a mice nest and about a 1000 mice turds...nice to know I had been breathing this for a couple of months

......that little ball of lint you found is a mouse nest....

Thanks for the heads up. Guess I'll be checking this WAY more often.

Posted

its amazing how quickly those filters can dirty up. It is probably not a bad idea if you folks make a habit of checking the filter every 6 months or so for optimum HVAC performance, no matter what type of climate you live in, perhaps??? eh??

Posted (edited)

Go to an outdoor, hunting or farm supply store. Buy a $4 little bottle of coyote urine. Put a few drops here and there under the hood. I hit the wire looms a bit as well. Do Not put it on the air filter or anywhere in the air ducts or you will have to get used to coyote urine. I apply it about twice a year, it keeps the mice away.

 

The K&N Durable cabin filter is a great investment. It takes about ten minutes to install it the first time. Once you have cleaned it a time or two, you can get it out in two minutes flat.

Edited by Darksky
  • Like 1
Posted

Another trick I have read is to use scented dryer sheets under the hood. They can be zip tied in place and rats/mice despise the smell and won't get near. I'm lucky my cabin filter did not look anywhere near as bad as some I have seen on this forum when I changed it.

Posted

Another trick I have read is to use scented dryer sheets under the hood. They can be zip tied in place and rats/mice despise the smell and won't get near. I'm lucky my cabin filter did not look anywhere near as bad as some I have seen on this forum when I changed it.

I know someone that used the dryer sheets in his MH. The mice used them to make a nest :)

Posted

So I took a video scope under the window under the hood of my truck and found that there is absolutely nothing to prevent a mouse from getting inside and into the filter which they can easily eat through. So within the next week I'm going to dismantle and fix a screen to prevent it any mice or large leaves from getting into the cabin. I'll take some pictures and videos and post them

 

Wallmart sells stainless steel scrubby pads (for pots'n pan's). When I put my motorsickle away for the winter (shed behind the house) I shoved Wallyworld stainless steel pads into the exhaust pipes to keep the mice out. Same stuff might work under the hood of our trucks??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Can anyone explain why the oil pressure runs higher after the DFM is shut off?  just installed the Pulsar Lt.
    • Thanks!  I figured as such; GM and other manufacturers have used standard parts and harnesses across trim levels and such for decades.  I pulled the blank accessory cover off of my commuter van (a 2016 or so Chevy 15-passenger) years ago and found the plug for a USB outlet.  It wasn't connected to anything, though (I tried swapping in an outlet from another van).  I was a GM Tech years ago (late-90s) and was pretty familiar with my 2006.  I might be wrong, but I view newer vehicles (pretty much anything made in the past 20 years) as being a lot more plug and play.  Meaning, more unused wires and plugs unless you have the Mack Daddy of vehicles.    
    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...