Need some electrical advise for tow mirror install on LT.

[JRL1164]

I'm ordering some Tow mirrors of Amazon and am getting things ready for my install. I have a 2014 LT so I'm gonna wire everything myself to the BCM. I've figured out what wires I need to tap and etc. First question is there any reason I shouldn't wire it to the BCM? (I don't want to fry anything) Secondly I'm looking for a pin that I can crimp to my wire and slide it into the connectors on the BCM. I want this to be neat and not a bunch of cutting and splicing. I don't want my finale product a rats nest. I'm not a electrician and can't find what I'm looking for most likely due to me calling it something different. Anybody know what I'm looking for?

 

 

Sent from my iPhone using Tapatalk

[pgamboa]

What is your plan for adding the circuits to the harnesses and getting them through the door hinge boot/connector? Also, the park lamp circuit (according to the RZY Harness) lands under the hood in the X50A Under Hood Fuse Panel. Turn Signals land in the BCM, and Cargo/Courtesy Lamp lands in the X60A Junction Box.

 

Have you removed the door connector to see if you have pins # 9, # 11, and # 41?

 

 

 

Sent from my iPhone using Tapatalk