Jump to content

What's needed to add parking sensors???

MiamiSilverado1500
 Share

Recommended Posts

zikronix Enthusiast

zikronix

Posted
Posted
On 1/4/2018 at 8:40 AM, pgamboa said:


If you have rear sensors, then you’re like me. I had to get the new park assist module programmed by WAMS. www.whiteautoandmedia.com. You’ll want to find a module from the same year. I advise you email WAMS first for fitment and pricing before you dive into this.


Sent from my iPhone using Tapatalk

just out of curiosity what was the total cost on this...not counting the bumper.

  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
just out of curiosity what was the total cost on this...not counting the bumper.

You’d have to send a inquiry to WAMS on module programming. I’ve done several things and don’t recall the individual price of the module programming.

Factor (4) sensors. They run about $100 each but was able to find some take offs on eBay for much less. I bought the harness that feeds each sensor into the plug on the bumper for about $50. Module was about $40. Maybe $20 on wiring and terminals. Let’s say programming the module is $150.

I probably spent about $400.


Sent from my iPhone using Tapatalk
  • Like 1
DBrach Enthusiast

DBrach

Posted
Posted
20 hours ago, pgamboa said:


You’d have to send a inquiry to WAMS on module programming. I’ve done several things and don’t recall the individual price of the module programming.

Factor (4) sensors. They run about $100 each but was able to find some take offs on eBay for much less. I bought the harness that feeds each sensor into the plug on the bumper for about $50. Module was about $40. Maybe $20 on wiring and terminals. Let’s say programming the module is $150.

I probably spent about $400.


Sent from my iPhone using Tapatalk

Hey Phil, what about the rear bumper?  Safe to say about the same cost?  Did the programming include both front and rear bumpers?

  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
Hey Phil, what about the rear bumper?  Safe to say about the same cost?  Did the programming include both front and rear bumpers?

If you don’t have Factory rear sensors, I don’t know how much more work would be involved with adding it from scratch. By having rears already, that wiring from the bumper to the module was already present and any other wiring to the dash. I never explored all of this since I already had it.


Sent from my iPhone using Tapatalk
  • 5 months later...
drob999 Enthusiast

drob999

Posted
Posted

Hello, thanks for the great video. I have a 15 Chevy Silverado. I hve rear assist and adding croqnt parking assist thanks to your video. 

 

I cannot find the bumper sensor or trim bezel ring. Do you know the part number cor the trim ring and trim bezel?

  • Like 1
  • 6 months later...
Yogiarana Enthusiast

Yogiarana

Posted
Posted

I'm in the same situation but dont really care about getting them to work is there anywhere that sells just inserts so it looks like you have them instead of just holes?

  • 8 months later...
CapnCrunch New Member

CapnCrunch

Posted
Posted

Hey, I accidentally bought a chrome bumper with sensor holes, is there any hole fillers or caps I can use to cover the holes? And is the rear sensors the same as front sensors? 

 

 

  • 4 months later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      tl; dr I've now reached the 6th floor of hell. I'm chronicling my journey for my morning readers.   Pulling the top of the intake apart was moderately easy but it involved a lot of parts, connections, and minutae. I was preparing for the new fuel lines to arrive ("nut and bolt kit" it's called). The fuel line connections are notched and held in place by the manifold and a metal plate with a T27 screw.   It's on the back of the intake, under the firewall, with little clearance, and two hard metal fuel lines in the way. I was using Franken-tools (weird combinations of 1/4 inch ratchet with/without an extension, with a bit holder for my T27) to get in there. One of my sockets and bits fell off and has yet to emerge on the floor. I lost a second setup and that's when I almost started throwing tools. But that was the point at which I had gotten traction on the Torx head, and it promptly stripped. No more traction.   I started humming "1-877-kars-4-kids" because I was about at that point. You know what? I'm $1500 into this thing and I can make it disappear just as quickly. This isn't fun anymore. I had spent a lot of time already "tidying" around the engine bay: Fixing all the "someone's been here before!" BS. The truck has been exclusively dealer- and shop- serviced and I'm reminded of why I never let other people work on my cars unless absolutely necessary.   Speaking of dealer service. This truck has a 1" stack of records going back to 1995. I put them all in an excel spreadsheet, date/mileage/description.   The CPI spider has been replaced 4 times in 85k miles. The EGR? Another 4. Multiple, multiple O2 sensors. One Cat. 4? Sets of plugs and wires, and I swear half the stack is diagnosis paperwork for "misfire, runs rough, extended crank, dies at stoplights".   GM was producing some proper crap back then. And it was still well within the era of brittle/crappy plastic. (Windows 95 was released the same month this truck was sold new, we HAD the technology!!)   There (was) a plastic shroud around the evaporator core and HVAC fan in the engine bay. I noticed a chunk of it missing so I poked at it some more and it literally shattered. Touched it some more and pieces were crumbling off. Had a good laugh. Clearly whatever plastic garbage they were using had broken down over 30 years and was literally turning to dust. That was a good half hour of using a shop vac to remove the rest of it.   Back to it.   I was going to give up for the evening but then decided I'm already level 10 pissed off at the stripped screw: G* D* it, give me my tools back -- and my JOY. We'll do this the hard way: The whole intake is coming off.   Blazer won Round II. After finally finding and accessing the 12 intake bolts and using a pry bar to unseat it from the heads, it popped loose in an explosion of gunk and grime raining down into open ports. Awesome.   6 times I reminded myself: Be careful of the temperature sender on the front of the intake.   YEAH, I forgot again and snapped it clean off in the removal. Add another $20 to the ever-growing list of new parts this thing is consuming.   The shame is, long before removing the intake, I had changed the oil in prep for Tuesday's momentous fuel line replacement that was going to be the magic fix and I'd have a running Blazer to tool around in this next weekend. The intake removal, including raining gunk, also gushed dirty coolant all over the valley. Of course it did. Welp, there goes another $35.   I now need an intake gasket set, bolt set, coolant temp sensor, another 5 quarts of oil, some RTV. Don't worry, I've already got 3 new jugs of Dexcool and a thermostat waiting. I'll fill it with clean water first to get it running, dump it, and then add the Dex later on in case... well, let's not go there. I'm only tearing this down once, next time the truck is going on Marketplace for FREE.   Oh, and I'm going to need vacuum hose for all the stupid connections placed at the rear of the engine which have since disintegrated. Come on, GM....tell me you don't do that anymore?   Oh, and the ears on the distributor where the cap screws down are both cracked. I mean, why not put a new distributor in it too. You get a distributor, YOU get a distributor, Everyone gets a new distributor!   This truck isn't out of the woods yet...I'm already questioning how much more time I'm willing to sink in.
    • William Aldrich
      Bent valve in 2025 GMC Canyon Denali - Requires engine swap at 14K miles

      By William Aldrich · Posted

      NewDude, thank you for the suggestions!    I did follow up and the dealer indicates he has an open CX case and is working with DPAC (Dealer Parts Assistance Center).   Per the dealer, GM has had a quality spill and is not providing an update for when a replacement engine will be available.
    • Silver Yeti
      Poll: Does your truck have the rear window leak?

      By Silver Yeti · Posted

      That's interesting.   There was a factory wire-hole in the back, top of the rear cab, which had a wire for the third brakelight assembly running through it, as well as several holes (10 of them I believe) for all of the studs coming off of the 3rd brakelight assembly itself.   I sealed all of those holes with RTV/silicone as well.   I found it kind of odd, that none of those holes, were sealed with any kind of sealant by the factory - if there was any there, it wasn't very much.   That said, I've been out in heavy rain and have ran the truck through high-pressure car-washes a few times now and she has been 100% water-tight to this point.   I feel very confident in the repair, we'll see how it holds up.
    • Jay-22-2500
      2024 Silverado 2500 HD with the 6.6 Gas (L8T) Engine

      By Jay-22-2500 · Posted

      I bought a used 2022 2500hd with 6.6L in February. In March took a 2200 mile trip towing our 6500 lb trailer. Changed the oil day before leaving and when we were arriving at our 1st destination, low oil light came on (roughly 1000 miles) it was 2 qts low. Now it towed like a dream, no issue there, and we did go through the mountains of TN, but still, 2 qts! Luckily I did purchase an extended warranty. Brought it to the dealership in April, oil change and consumption test. Brought it back last week, 1300 miles, no towing, and no oil showing on the dipstick. GM is reccomending a new engine (cheaper than them rebuilding), we'll see if the warranty company comes through. 
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      T3's and Ibuprofen. I do have a cryotherapy unit (ice machine) and a lift chair that will allow me to raise my legs above my heart.  There are topicals that I can use once the wound is fully healed.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...