Removing lift, possible 2/4 drop. Want 15” slicks. Do the 1320 caliper brackets work with k2xx?

[Denali62]

I am wanting to cut the best time and Mph I possibly can so I’m looking at 15” wheels and slicks but in order to get the perfect size I must go to a 15 because there are a lot more sizes.  So I can either run s10 brakes or machine a set of calipers down for when I’m running the 15” and swap back when I’m not.  Does anyone know if the 1320.com brackets work on our trucks?  Thanks 

[Nasty]

1320 site shows a parts list of what brakes you need.  Yes it works. Many many people use it 

[Denali62]

I called them and verified.  Thanks a lot.  But now I’m stuck trying to pick a tire that will not look too small.  I’m most likely just goin to do 2” rear drop at first then add the rest of the 2/4 kit later.  I’m thinking a 32x13-14 R15 will be bare minimum to hook any kind of launch off of a brake stall in 2wd. My shop says that 10.5-11.5 will hook so I’m gonna take their advice.  Plus an inch or so.  I have a set of 20” continental dws off of my bmw they would be perfect for an awd launch.  But they are a little short even for the 2/4.  I wish I could get a 4/6 on a 4wd magneride Denali 

[Nasty]

The biggest tire I can pretty much rub is a 295 65 15.   If you go to wide with the wheel you'll need to have the diff cut.  I would just lower the teuck a bit more. A 3/5 would look awesome 

[Nasty]

Contact Norcalss. I think his custom kit is going to come out soon. I'm pretty sure it's for magnaride as he has a 2016 escalade