Jump to content

2014 to 2016 conversion

Chevyrida254
 Share

Recommended Posts

Viktorrocks15 Enthusiast

Viktorrocks15

Posted
Posted
I like 2016-19 Silverado too; however, I just want to caution you before you are going to do it. If your 2014 Silverado has part of front end damage that needs few parts replacement anyway or it has a rebuilt title then I might consider do the conversion. Other than that, 1) if you have a clean title, you might have a hard time convincing a prospective and suspicious buyer that your pickup has all original part and paint or has never been in an accident. 2) your 2014 parts have used resale values. 3) unless the 2016 parts are real cheap, I would use the money from not doing the conversion to lift/drop with a really nice set of wheel and tire plus other modifications to make your 2014 uniquely your. Someday, who knows you might get bored with your 2014 then you might consider 2023-2025 generation looks. In my opinion, think twice because it might not worth it.

 

This is awesome! Yes. Before you do any modifications to your truck you should consider all your ups and downs about this. As I’m sure with all mods people do to their trucks.! Let me be clear about what I’m selling, it is a 16-18 front end not a front clip, the difference is I’m supplying parts that are take offs or used not fixed or repaired and only to for the conversion. Just as if you were to get a fender bender except you replace it with newer year. When I did my conversion I wanted to do a clean mod not Frankenstein modification. I made a list of every part i needed to accomplish this and the result was beyond my expectations. So I wanted to give the opportunity to everyone who wants this and facilitate the legwork on finding the parts. I go to junk yards, search on OfferUp, Craigslist and things like that. I compare the prices buying them new and that’s how I came with prices.

The result is on the picture below.

0d3ac33ea1033c58e6941a2e7eda0d8a.jpg

 

 

Sent from my iPhone using Tapatalk

  • Replies 33
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

mikeyk101
mikeyk101

Unfortunately it doesn't look like he's been back here for over a year and a half. And you may want to edit your post and remove your phone number. Not a good idea to post that on forums unless you li

Loco-diablo
Loco-diablo

Is that the same truck in both pics?

iPhonez71
iPhonez71

I like 2016-19 Silverado too; however, I just want to caution you before you are going to do it. If your 2014 Silverado has part of front end damage that needs few parts replacement anyway or it has a

Posted Images

SirenRed16 Senior Enthusiast

SirenRed16

Posted
Posted
 
This is awesome! Yes. Before you do any modifications to your truck you should consider all your ups and downs about this. As I’m sure with all mods people do to their trucks.! Let me be clear about what I’m selling, it is a 16-18 front end not a front clip, the difference is I’m supplying parts that are take offs or used not fixed or repaired and only to for the conversion. Just as if you were to get a fender bender except you replace it with newer year. When I did my conversion I wanted to do a clean mod not Frankenstein modification. I made a list of every part i needed to accomplish this and the result was beyond my expectations. So I wanted to give the opportunity to everyone who wants this and facilitate the legwork on finding the parts. I go to junk yards, search on OfferUp, Craigslist and things like that. I compare the prices buying them new and that’s how I came with prices.
The result is on the picture below.
0d3ac33ea1033c58e6941a2e7eda0d8a.jpg
 
 
Sent from my iPhone using Tapatalk
What all is needed? Hood, grill, bumper and headlights?

Sent from my SAMSUNG-SM-N920A using Tapatalk

Loco-diablo Senior Enthusiast

Loco-diablo

Posted
Posted (edited)
13 hours ago, Viktorrocks15 said:


Lol, yes!


Sent from my iPhone using Tapatalk

ha ha.. lot of work!  Looks great! I like the Z71 badges! 

Edited by Loco-diablo
iPhonez71 Enthusiast

iPhonez71

Posted
Posted (edited)
1 hour ago, Loco-diablo said:

ha ha.. lot of work!  Looks great! I like the Z71 badges! 

When I searched for Silverado to buy, there were a few sellers that were advertising Z71 and 4x4 with only new decals. I almost got hooked because of prices.

A1113215-B9BE-4E4B-BB54-9D4EC720E8E7.jpeg

AEAC38DF-2307-4D6B-8ED7-92B95D10B919.jpeg

Edited by iPhonez71
Loco-diablo Senior Enthusiast

Loco-diablo

Posted
Posted
2 hours ago, iPhonez71 said:

When I searched for Silverado to buy, there were a few sellers that were advertising Z71 and 4x4 with only new decals. I almost got hooked because of prices.

 

My midnight edition has has the door badge too. Much better than the deal IMO. I was never a fan of the bed decals of any kind.

  • 6 months later...
Rogelio De Leon Jr. New Member

Rogelio De Leon Jr.

Posted
Posted
On 8/19/2018 at 6:58 PM, Viktorrocks15 said:

IMG_1596.HEIC
Just sold this “16-18 front end conversion kit” few weeks ago., I should have another coming in the next week if you interested. The only thing you’ll need be the headlights plug and play from gen5dyi.com to make your 14 connector fit with the 16 headlights IMG_0301.JPG
I did this conversion to my 15 Silverado


Sent from my iPhone using Tapatalk

How much it runs im interested?

  • 4 months later...
Frankielozano214 Senior Enthusiast

Frankielozano214

Posted
Posted
On 8/20/2018 at 7:05 PM, Viktorrocks15 said:

Prices for the LT 3500 and LTZ 4500


Sent from my iPhone using Tapatalk

What’s the difference between the lt/ltz is it just the grill or what? 

SirenRed16 Senior Enthusiast

SirenRed16

Posted
Posted
What’s the difference between the lt/ltz is it just the grill or what? 
The main difference will be the grill and headlights.

Sent from my SM-G955U using Tapatalk

  • Thanks 1
  • 2 months later...
jason constantine New Member

jason constantine

Posted
Posted

When you did the swap from the 14' to 16' did you see anything that really made a difference, stand out like the height of the core support is different or the hood to the grill was different. It even the way the headlights didn't match the holes very good. Just looking because I have a 2014 and I like the Fab Four bumper grill combo call ed the grouper. They only make that in the 16 and newer. So basically wondering what issues I may run into with that. 

  • 1 year later...
Logank New Member

Logank

Posted
Posted
On 8/19/2018 at 6:58 PM, Viktorrocks15 said:

IMG_1596.HEIC
Just sold this “16-18 front end conversion kit” few weeks ago., I should have another coming in the next week if you interested. The only thing you’ll need be the headlights plug and play from gen5dyi.com to make your 14 connector fit with the 16 headlights IMG_0301.JPG
I did this conversion to my 15 Silverado


Sent from my iPhone using Tapatalk

Do you by any chance have a conversion kit for mak

 

On 8/19/2018 at 6:58 PM, Viktorrocks15 said:

IMG_1596.HEIC
Just sold this “16-18 front end conversion kit” few weeks ago., I should have another coming in the next week if you interested. The only thing you’ll need be the headlights plug and play from gen5dyi.com to make your 14 connector fit with the 16 headlights IMG_0301.JPG
I did this conversion to my 15 Silverado


Sent from my iPhone using Tapatalk

Any chance theres a conversion kit to change the front end of a 17 to a 15? I don't mind the way my 17 looks but it has HID and they're extremely expensive and don't seem to have as much light output as my 09 with LED bulbs

 

  • 4 weeks later...
  • 2 weeks later...
Alan12002 New Member

Alan12002

Posted
Posted
On 8/19/2018 at 6:58 PM, Viktorrocks15 said:

IMG_1596.HEIC
Just sold this “16-18 front end conversion kit” few weeks ago., I should have another coming in the next week if you interested. The only thing you’ll need be the headlights plug and play from gen5dyi.com to make your 14 connector fit with the 16 headlights IMG_0301.JPG
I did this conversion to my 15 Silverado


Sent from my iPhone using Tapatalk

Hey man im interested in doing this to my 2014 Silverado you have any kits???? Or know where I can get parts 

cbrsilv15 Senior Enthusiast

cbrsilv15

Posted
Posted
Hey man im interested in doing this to my 2014 Silverado you have any kits???? Or know where I can get parts 

As far as the body parts, you’ll be better off just purchasing them separately, unless you can find a complete front end locally. For the wiring, you can get the plug and play harness to swap to the 16+ front end for the electrical portion.

https://harnessdr.com/product/14-15-1500-all-trims-16-18-1500-all-trims-headlight-conversion-harness/


Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,897
    Total Members
    8,960
    Most Online
    ncleg
    Newest Member
    ncleg
    Joined

  • Who's Online   1 Member, 0 Anonymous, 1,294 Guests (See full list)

  • Latest Articles

  • Posts

    • dna9656
      New to Me 2010 SLE (Quirks, Issues)

      By dna9656 · Posted

      Your tire pressure issue may just be batteries, you can reset them using tge Ing switch (I think) and the owner's  manual. ChatGTP will b e a faster, better help than Google.
    • Another JR
      Towing In Loose Gravel

      By Another JR · Posted

      The thinking is that starting out in a higher gear makes it easier to avoid applying excessive torque when pressing the gas pedal. In a modern 4wd truck with 4 low and a limited slip or locking rear end, I would use 4 low and try to crawl up the ramp. Sometimes if they are too slippery, you have to back up to let the boat have some bouyancy, and then accelerate briskly to get some momentum to help you pull the through the slippery parts. 
    • XY74
      Roll up bed cover experiences

      By XY74 · Posted

      I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • Another JR
      Multigate electrical problem

      By Another JR · Posted

      The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...