Jump to content

Bed not level with cab?

dphel27
 Share

Recommended Posts

EricTheRed Enthusiast

EricTheRed

Posted
Posted

I’m pretty sure you can adjust it yourself... that’s what I had to do on my Colorado. 

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted

Hi. We certainly recommend reaching out to your local certified dealership to have this concern addressed. Our team is happy to connect with them on your behalf. To do so, please send an email to [email protected] ATTN: forum username/GM Trucks with your contact information, VIN, brief description of your concern,  and preferred dealership. We look forward to hearing from you. To learn more about GM's privacy policy, please visit http://bit.ly/2h3ZUnC. 

 

Aleigha W. 

Will71 Enthusiast

Will71

Posted
Posted

Hi my $56,000 2019 rst 5.3 8 speed 8-19 build date is just like you say my drivers side is higher, the issue here is the cab needs to be lifted there is only a left right forward back adjustment on the bed, my buddy's 2020 Sierra is also the same way,  I also thought my truck was dropped off the train or someone launched it but it's just very poor quality control at gm, i don't want to make you sad about your truck but I am so disappointed in my truck, my transmission is Awful, my rear window leaks water, and apparently this is all normal and can't be fixed, gm really does not care they would do anything to save 27cents,  one positive note is I've managed to go 5400 miles without having it towed.... 

GearJonny Enthusiast

GearJonny

Posted
Posted
1 hour ago, Will71 said:

Hi my $56,000 2019 rst 5.3 8 speed 8-19 build date is just like you say my drivers side is higher, the issue here is the cab needs to be lifted there is only a left right forward back adjustment on the bed, my buddy's 2020 Sierra is also the same way,  I also thought my truck was dropped off the train or someone launched it but it's just very poor quality control at gm, i don't want to make you sad about your truck but I am so disappointed in my truck, my transmission is Awful, my rear window leaks water, and apparently this is all normal and can't be fixed, gm really does not care they would do anything to save 27cents,  one positive note is I've managed to go 5400 miles without having it towed.... 

 

This sounds like my issue. I wonder if there could be a washer or bushing missing on that left rear cab mount causing it to sit lower..? Or why the heck.? For a $54,300 truck, I just expect too much I guess 

GearJonny Enthusiast

GearJonny

Posted
Posted
58 minutes ago, Will71 said:

You could try this, gm only pays 24 minutes to fix so a $20.00 an hour tech gets like $9 subtract taxes = like $6 to fix so you should probably do it yourself if you want it right. 

MC-10169342-9999.pdf 280.32 kB · 4 downloads

Correct me if I’m wrong, but this will not raise or lower the bed.. unless one of those plastic pins could be possibly pinched causing the bed to not sit down flat on the frame.?

GearJonny Enthusiast

GearJonny

Posted
Posted (edited)
4 minutes ago, GearJonny said:

This sounds like my issue. I wonder if there could be a washer or bushing missing on that left rear cab mount causing it to sit lower..? Or why the heck.? For a $54,300 truck, I just expect too much I guess 

On your transmission issue.. mine did shutter and almost felt as if slipping at times up until about 6,000 miles. Now currently it has been working perfectly.. not sure what happened but the shutter is gone. (I have been driving her hard to either make it finish itself off or fix itself.. idk if it helped or not!) LOL

Edited by GearJonny
Will71 Enthusiast

Will71

Posted
Posted
13 hours ago, GearJonny said:

On your transmission issue.. mine did shutter and almost felt as if slipping at times up until about 6,000 miles. Now currently it has been working perfectly.. not sure what happened but the shutter is gone. (I have been driving her hard to either make it finish itself off or fix itself.. idk if it helped or not!) LOL

Hi so it doesn't appear to lift or lower the bed,  in my case I need to Lift the body on left rear, I was going to get a cab mount bolt washer and  shim between mount and body, my bed is off to the right not sure if sliding it to the left will lower it doesn't appear to, I was going to adjust the bed after I lifted the body just haven't done that yet, I agree the price point of these vehicles. Bring it in line with high quality German luxury cars with high level of engineering  and manufacturing.

  • 8 months later...
Troger Enthusiast

Troger

Posted
Posted
On 5/22/2020 at 8:57 AM, Will71 said:

Hi so it doesn't appear to lift or lower the bed,  in my case I need to Lift the body on left rear, I was going to get a cab mount bolt washer and  shim between mount and body, my bed is off to the right not sure if sliding it to the left will lower it doesn't appear to, I was going to adjust the bed after I lifted the body just haven't done that yet, I agree the price point of these vehicles. Bring it in line with high quality German luxury cars with high level of engineering  and manufacturing.

TSB regarding vertical alignment is here in case anyone needs it.

https://static.nhtsa.gov/odi/tsbs/2020/MC-10181703-9999.pdf

  • 2 years later...
mrflorida New Member

mrflorida

Posted
Posted

Have a simillar issue measured the bumper to ground on each side and its the same. Put a level on the bumper and its level. Problem appears to be the bed. So that means it could be adjusted as platform is level. You can see it when looking at bumper in relation to tail gate at the bottom. Its 3/4in off. Will have dealer take a look no accidents reported. 2021 2yr old

mrflorida New Member

mrflorida

Posted
Posted
23 minutes ago, mrflorida said:

Have a simillar issue measured the bumper to ground on each side and its the same. Put a level on the bumper and its level. Problem appears to be the bed. So that means it could be adjusted as platform is level. You can see it when looking at bumper in relation to tail gate at the bottom. Its 3/4in off. Will have dealer take a look no accidents reported. 2021 2yr old

Update it appears the gas tank is on the left side of the truck. It is now full so 21g x 8.4lb=176lb maybe this is part of the issue.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Keith179
      Cold start Miss, oil in cylinder

      By Keith179 · Posted

      I’m out of ideas on this truck. 2020 Silverado 1500. 5.3 135,000 miles. Has a p0308 and p050d codes. Smokes From exhaust when cold. Compression test passed. New plugs, wires and coil on cyl 8. Same issue. New coil on 8, no change. Replaced injectors, no change. Bore scope showed oil pooled on the piston after sitting overnight. Pulled head and had machine shop check it out. No cracks. Stem seals looked good, replaced anyways. He also ground valve seats. Put it all back together and still have the same issue. Bore scope shows oil on the piston again. Leaning towards maybe a cracked ring but unsure. Cylinder looked good when the head was off, no scoring or scratches. Any ideas on what else I should look for?  Appreciate the help 
    • HeronLeal
      2021 Silverado 2.7L – N232395310 – Can someone with GM dealer access check my VIN?

      By HeronLeal · Posted

      Just want to make sure it is covered by Special Coverage N232395310 Evaporative Emission Purge Pump 2021 Silverado 1500 Custom 2.7L L3B ~100k miles I'm getting DTCs P146B and P146F. VIN 3GCPWBEK2MGxxxxxx   I spoke to a person that works at GM and he said it is not covered after checking my VIN.   Is there anyone here who currently works for a GM/Chevrolet dealership and has access to GM Global Warranty Management / Investigate Vehicle History who could explain how the VIN eligibility is determined?   thank you    
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thanks for all that information, I might purchase one and see if it will work for me, if not they may let me return it! Yes for sure the tires are definitely within limit for my truck empty, and when I do tow I'll definitely make sure to raise the rear psi for the amount of weight that's going to be on it.
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      Yes exactly, more and more these days people/companies are afraid of liability issues so its easier just to say no rather than risk putting their neck on the line.    I will say with the Autel unit or when I used it last year on my truck, it wasn't like I could choose the 2025 model year or even the 2024 model year as that option was not there to manipulate the placard pressures but had to go back to 2023 or there abouts and then it showed up as an option, odd but that was how the software was then and I can't say one way or the other now as they throw out updates every so often. I still would talk to your tire dealer though to start with and they may do it for nothing but also they may have a comment on a better unit to purchase. All I know is that one of the large tire shops in my area happens to use these Autel units for their use and set them up to use the wifi and all of that jazz for constant updating because each tire tech has one handed to them by the shop but I just plugged it into my laptop to update it and yes if one is bought it has to be registered so you can get the link to do updates and then the unit has to be updated before its even used. I am not at all techy so it took me a bit but anyway just a heads up for anything you buy, most likely it will need to be connected to a computer to access the internet to have it updated to the latest software version before you can put it to use.   If your truck is near empty, those tire pressures you listed are a very safe upper range pressures to carry the weight, both the front and rear as I know they could be run lower yet with an empty truck. And if its a trailer and not some motorcycle your going to strap onto the front of your truck on a rack, you shouldn't have a need to inflate your front tires if your at 55 front already, its the rear ones that would need more air if you have much hitch weight. 
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thank you, I'll check that Autel scanner out and see if it will work for me! Ya I can see GM's point of view if they lower the psi set value for someone and the person sell's the truck and the new owner puts the factory tires back on then their could be liability issues cause the psi warning light wasn't coming on when the tires were under inflated for towing their load and then it might be able to be traced back to GM lowering it.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...