2017 Truck Build. Whipple install

[Denali34]

Is there a catch can and a breather setup?

Sent from my SM-N960U using Tapatalk

Here’s a pic of the Norris catch can.


Sent from my iPhone using Tapatalk

[1SLOW1500]

Here’s a pic of the Norris catch can.


Sent from my iPhone using Tapatalk

Very nice and the dual open port to intake will keep the crank pressure down just keep a eye on it. Can such oil fumes into the intake. That's why the big power vehicles use a 5 port tank with breathers. But i wouldn't worry his minute about it.

Sent from my SM-N960U using Tapatalk

[CovetedStyle]

That's so rad!! $6500 for the whipple plus all your add ons I'm sure your over 8k I hope it runs like a beast!

[Denali34]

Very nice and the dual open port to intake will keep the crank pressure down just keep a eye on it. Can such oil fumes into the intake. That's why the big power vehicles use a 5 port tank with breathers. But i wouldn't worry his minute about it.

Sent from my SM-N960U using Tapatalk

How often should I check the catch can? Don’t know much about the setup as it is. Thanks for your help


Sent from my iPhone using Tapatalk

[Denali34]

That's so rad!! $6500 for the whipple plus all your add ons I'm sure your over 8k I hope it runs like a beast!

Thanks! Parts alone are past 8500 so far not including labor. My wife doesn’t know that much yet [emoji23]


Sent from my iPhone using Tapatalk

[CovetedStyle]

Just now, Denali34 said:

Thanks! Parts alone are past 8500 so far not including labor. My wife doesn’t know that much yet


Sent from my iPhone using Tapatalk

Brother I am juiced for you! A whipple on a clean ass lifted truck, thats the stuff dreams are made of! haha

[1SLOW1500]

How often should I check the catch can? Don’t know much about the setup as it is. Thanks for your help


Sent from my iPhone using Tapatalk

Odd part is in was just thinking that today. I empty mine daily. But that is only bc the super cold weather and the aluminum catch can and the quick heat of the motor cause half the can to fill with condensation. If this continues this summer I will install a auto drain. And if I was you at say 3000miles remove intake and look at throttle body blade and inside intake tube. Wipe it and see how.much oil is making it that way.

Sent from my SM-N960U using Tapatalk

[Denali34]

Brother I am juiced for you! A whipple on a clean ass lifted truck, thats the stuff dreams are made of! haha

Thanks man. I love your truck as well. I’ve been following your build since last year. Do you own a powder coating shop? That white and bronze is [emoji91].


Sent from my iPhone using Tapatalk

[CovetedStyle]

2 hours ago, Denali34 said:

Thanks man. I love your truck as well. I’ve been following your build since last year. Do you own a powder coating shop? That white and bronze is .


Sent from my iPhone using Tapatalk

Thanks brother! I do not but my friend Kevin does and they are pretty good at what they do. Thank again and are you on IG because I know you’re going to post videos and I got to check it out.

[Denali34]

Thanks brother! I do not but my friend Kevin does and they are pretty good at what they do. Thank again and are you on IG because I know you’re going to post videos and I got to check it out.

Yes sir. I just started following you. Denali_34 is my user


Sent from my iPhone using Tapatalk

[CovetedStyle]

6 minutes ago, Denali34 said:

Yes sir. I just started following you. Denali_34 is my user


Sent from my iPhone using Tapatalk

Boom!

[BillyDee]

On 3/18/2019 at 5:20 PM, Denali34 said:

 

Hello all. Well the time is finally here. Dropped off my truck at Vengeance Racing to get my 2.9L Whipple put on. They’re installing the Supercharger, Kooks Headers, Taylor wires, NGK Plugs, Catch Can, 180 degree Thermostat, Smaller pulley and custom HP tune. Expecting 520+ WHP.

 

Thanks for following along.

 

Nice!   I google VR and they aren't far from me.   I am not interested in a Whipple for my truck, but they do have a Corvette package I am interested in.   Thanks!

[Denali34]

 
Nice!   I google VR and they aren't far from me.   I am not interested in a Whipple for my truck, but they do have a Corvette package I am interested in.   Thanks!

They are one of the top tuners in the nation. I highly recommend them.


Sent from my iPhone using Tapatalk

[lapoolboy]

58 minutes ago, Denali34 said:

They are one of the top tuners in the nation. I highly recommend them.


Sent from my iPhone using Tapatalk

Where are they located?  I'm finding several "Vengeance Racing" companies out there.

[Denali34]

Where are they located?  I'm finding several "Vengeance Racing" companies out there.

Cumming, GA

https://vengeanceracing.net

 

Sent from my iPhone using Tapatalk