Jump to content

Brake Monitor in DIC

lebag335
 Share

Recommended Posts

JKD Enthusiast

JKD

Posted
Posted

There is a technical bulletin 19-NA-191 that covers this issue, but the latest software update (reflashing the  ECBM) performed under the following recall should solve the problem:

  • GM Recall #:
  • N192268090
  • NHTSA #
  • 19V889
  • Date Issued:
  • Dec 12, 2019

Just make sure the dealership resets the brake life indicator to 100%. My truck had almost 15K miles on it and the dealership just performed today. However, if this is in fact an algorithm and not actually sensors then I’m afraid this is just a bandaid for a useless feature. Ultimately and fortunately the brake pads have the age old wear indicators that will squeal when the pads get too worn, but it’s still nice to see the DIC not telling me I have only 14% pad life left after 14K miles, even if it really means nothing because this is a ridiculously useless feature. I’d rather have the sunglasses compartment by the map lights (that couldn’t hold anything larger than a pair of aviators) than this stupid brake life indicator. Lol

  • 4 years later...
D-HO New Member

D-HO

Posted
Posted
On 4/6/2019 at 9:37 PM, lebag335 said:

I’ve had my Trail Boss LT for 2 weeks now. The brake monitor in the DIC says my front brakes are down to 86%. It was 100% when I took delivery. Zero hard stopping on my part. Do the brakes on this new truck wear down that quickly? At this rate the monitor will tell me I need new brakes in 7 months! Anyone else have a similar experience??

I’ve had my 2021 TrailBoss since it was new.   I have 18.3k miles on it and I got the rear brake pads warning. I’m just over my Bumper to Bumper warranty.  I’m guessing they’ll be telling me I need to pay for the repairs.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,774
    Total Members
    8,960
    Most Online
    lanaderay
    Newest Member
    lanaderay
    Joined

  • Who's Online   3 Members, 1 Anonymous, 1,469 Guests (See full list)

  • Latest Articles

  • Posts

    • lanaderay
      5 Best Slide Down Gameplay Tips! 

      By lanaderay · Posted

      Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • lingyuair
      Why I Recommend a Desiccant Air Dryer for Cleaner, Drier Compressed Air

      By lingyuair · Posted

      If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
    • Another JR
      Remote Start Noise 2024 2500 HD Gas

      By Another JR · Posted

      I took a 12 second video on my iphone but the file is too big to upload. I will have to figure out how to extract the audio or just do another start with an audio recording. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...