Lowering Kit for Tahoe and Suburban

[O2_Stat]

Saw this beast on the 5 south freeway this morning. Chatted with the owner for a little since we are in a stop and go traffic and he said that it was lowered 1/2 inch all around. Just wondering if anyone know a lowering kit for a 2019 suburban and how the ride if you have one installed. Thanks

 

 

Sent from my iPhone using Tapatalk

[Dearmosd]

https://tbssowners.com/store/index.php?act=viewProd&productId=609

 

Should arrive next week later this week and I should install the following weekend.

 

There is plenty of info here: https://www.tahoeyukonforum.com/threads/norcal-ss-custom-2-3-5-4-5-for-all-2wd-2015-gm-suv.79133/

 

[hcvone]

I have a 19' Callaway standard lengh Tahoe lowered, Callaway did it when it was there, it rides great, and handling is way improved 

[Dearmosd]

Well I finally got around to installing the kit...well just got around to the rear. Really considering the newer adjustable front shocks from Norcal and not install the front spindles. Here is a before and after pic. I used the 1" spacer, stock upper rubber mount and I got less than 2". Not I did use the newer sensor rods at the instructed 3" spacing but I also made marks of the stock sensor positions and after install the marks are a fraction of, maybe 1/8" so the air shocks could be holding a little more than before install

 

Before 37 5/8"

 

 

After 36"

 

 

[Dearmosd]

did the front spindle drop this past weekend

 

[Danyi2170]

What did it cost? 

[Dearmosd]

https://www.belltech.com/products/belltech/lowering/belltech-2014-2018-gm-suv-w-mag-auto-2wd-ride-2-3f-4-r-will-work-with-mag-ride-vehicles-1019.html

 

[Jayg69]

On 6/10/2019 at 8:30 PM, Dearmosd said:

did the front spindle drop this past weekend

 

I have new 2020 RST. I’m interested in lowering it. What are your thoughts on best way to go. I’m look to keep ride. Hoping to get at least 2 in the front. 4 in the rear. Thx. Jay

[gat0r]

On 5/12/2020 at 9:29 PM, Jayg69 said:

I have new 2020 RST. I’m interested in lowering it. What are your thoughts on best way to go. I’m look to keep ride. Hoping to get at least 2 in the front. 4 in the rear. Thx. Jay

 

check the TYK Link from Dearmosd.

 

Tony's kit (Norcal SS)  works well

[Rfgleas]

On 5/14/2020 at 2:37 AM, gat0r said:

 Have 2020 RST 4wd,  wanting 2/4 drop. Is spindle drop better than just Springs? What’s code to ensure I have magna ride?  Thanks all! 

[gat0r]

pretty sure RPO is z95

 

if you want to keep mag ride..spindle will do that.

it allows to keep same ride quality, just lower.

 

& more than likely it will lower 1.75"  as that is what it did for my vehicle

[Rfgleas]

1 hour ago, gat0r said:

pretty sure RPO is z95

 

if you want to keep mag ride..spindle will do that.

it allows to keep same ride quality, just lower.

 

& more than likely it will lower 1.75"  as that is what it did for my vehicle

Is this the one you went with?

[gat0r]

no, as that is the kit for the previous generation

[gat0r]

we have been talking about '15 -'20 model years

 

so this kit

https://store.tbssowners.com/index.php?act=viewProd&productId=609

[gat0r]

what year is your hoe/burb?