Jump to content

Recommended Posts

Posted

Has anyone on here debadged their multipro tailgate? I'm picking up my AT4 tomorrow and thinking of doing this. Any pics?
 
Sent from my Pixel 3 XL using Tapatalk
 
 

I took off the Sierra and at4 from my tailgate and just left the GMC. I was going to replace the GMC with a large at4 badge but I think it looks good the way it is now. Not so busy556925f5e4f44d0026f27c027d706f46.jpg

Sent from my SM-G975U1 using Tapatalk

  • Like 3
Posted

This cleans it up. That tailgate is so busy from the factory. There is a white one i see that is debadged in my town.

  • 1 year later...
Posted
On 5/6/2019 at 9:36 AM, smrr1 said:

This cleans it up. That tailgate is so busy from the factory. There is a white one i see that is debadged in my town.

I completely agree. 
 

I just partially debadged mine this weekend, and added matte black vinyl inserts from TVD Vinyl Decals to the remaining chrome lettering. Completely changed the look, IMHO. Also, the “GMC” was not installed level at the factory. Every time I looked at it, it bothered me...

 

F04ABB05-837B-449F-9B33-16EBE3FAA494.jpeg

Posted

At some point I'll remove the big center "Sierra" as I believe it's just too much in the middle...I actually purchased from the dealer the smaller "Sierra" from the T1 Denali and plan on putting that in the lower left and keeping the SLT in the lower right...i guess similar to the K2 tailgate layout. Just more symmetrical to me. Did yall use the eraser wheel, or floss method?

 

IMG_1995.jpg.1c226b236eea8b7703bc151029082cab.jpg

  • Like 1
Posted

I used some braided fly line backing to get the letters started, then slowly peeled them off. I removed the residue from the foam adhesive tape with WD40, Windex, and the edge of a credit card. 

  • Like 1
Posted

I rode around for about 3 weeks with all the emblems off... Just seemed too bare, so got the black GMC emblem reapplied. I think it looks cleaner now. 7be048d83006d2997f042be9755585ea.jpgea1b8d54c0310a8dd77a4102e03e0e24.jpg

Sent from my Pixel 4 XL using Tapatalk

  • Like 3
Posted

Had the "Sierra" badge and the dealer logo removed before it was polished and the ceramic coating on the paint, no more Sierra on the truck, people ask what a AT4 is.

De Badge.jpeg

Posted
On 5/5/2019 at 9:34 PM, DeLucecc said:

I did mine when I first got it. I think it looks a lot better. 

PhotoEditor_20190505_193228149.jpg

I did this, but kept the Denali emblem but in black.  My truck is black so it blends in, but adds a little something to the back.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,739
    Total Members
    8,960
    Most Online
    JimmyB4
    Newest Member
    JimmyB4
    Joined
  • Who's Online   1 Member, 0 Anonymous, 734 Guests (See full list)

  • Latest Articles

  • Posts

    • I’ve own several successful businesses. I’ve bought homes and lived in different states. I’d witness several generations buy homes and survive in different economic circumstances. You get awful sippy when people have different experiences than you do. You live a life. I’ve lived a life. It seems our experience has been different. You can point out generalized statistics. Some people learn how to thrive when the odds are against them. Living in different states does make a difference in a persons quality of life and economic outcomes and opportunities. That’s a fact Jack. It’s my truth, my life. Hard work and long hours the right environment made my families life easier. And yes moving to a different state increased the odds of that happening. Stats are generalized. People who thrive don’t make excuses. They beat the odds. Others get mad and point to those statistics. I guess that’s you. My post pointed out how you helped people beat the odds. Somehow your panties got in a wad. Go figure. 
    • Good question, I don't remember for sure but I believe it was the HD. I will check and get back to you.
    • Point of the post sir was that while both wages and cost are rising EVERYWHERE; the cost is rising faster EVERYWHERE than the ability to buy EVERYWHERE. We're not going down the location rabbit hole. I'm aware of what economic migration is. I've lived in four states including Texas.   It's what "Purchasing Power" means.   I'm not telling you what I think. I'm telling what the government, your government, data shows.   It wasn't an argument. It wasn't a suggestion. It was a statement of FACT. You are absolutely entitled to your own opinion. Your not entitled to your own facts. If you and I were, they wouldn't be facts.    fact /făkt/   noun Knowledge or information based on real occurrences. "an account based on fact; a blur of fact and fancy." Something demonstrated to exist or known to have existed. "Genetic engineering is now a fact. That Chaucer was a real person is an undisputed fact." A real occurrence; an event. "had to prove the facts of the case." The American Heritage® Dictionary of the English Language, 5th Edition • More at Wordnik   If you'd like to disagree call your Senator or Representative and let him know his departments are in error. But you and I? We are not doing this. 
    • Probably a one and done post, but do you have a CEL on the dash? Was having issues with my transmission, fortunately only a week, and it turned out to be the transmission harness. Valve body was in good shape, so new harness with all the sensors attached, new fluid, and filter. Seems to have worked so far?
    • Two interesting tidbits of information which are NOT related were just released.   One, regarding the possible thrust bearing issues / engine failures with the 3.0. Demonworks just did a segment in which they believe they may have found "a" or "the" cause of thrust bearing failures: A missing thrust bearing. If the engine doesn't have all its thrust bearings from the factory, the missing bearing can cause extra play which ends up destroying a nearby thrust bearing which then sends metal through the engine.       Of other importance, Lake Speed Jr released some interest information regarding oil weight selection for the 3.0. Comparisons of:   AcDelco 0w20 Dexos D Mobil 1 ESP x2 0w20 Dexos D Mobil 1 ESP x2 0w30 Mobil 1 ESP x4 0w40. Mobil Delvac 5w40   Spoiler alert: The Mobils are PAO Ester -base and the ACDelco is a Group III base. Mobil shows lower wear in their tests for similar weights. Additive packages between 20-30-40 weight ESP's appear to be the same, but only 0w20 is Dexos D licensed. Wear is even more reduced with 30 and 40 weight ESP although all perform very well and resist shear and provide very similar viscosities within temperature operating ranges in the 3.0.   There are even more surprises, so just go watch it.    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...