Jump to content

Greetings from Toronto

63MM

By 63MM
in New Member Introductions

Recommended Posts

63MM Enthusiast

63MM

Posted
Posted

Have been lurking here as a visitor for the past week or so gaining some insight on '19 vs '20, 5.3L vs 6.2L, 8 speed vs 10 speed etc.  Decided on a fully loaded Dark Sky Metalic 2020 AT4 with the 6.2L.  However, had to go with the 6'6" box - longer than I need, but oh well, the truck is awesome!  Love the multipro tailgate.  Truck is parked beside my VW grocery getter - absolutely dwarfs the car.

 

 

20191029_192452.thumb.jpg.5c0f2109c257f893f679aa3c9a628fd4.jpg20191029_192325.thumb.jpg.324fe6f3083d01de7ddafd24fecc6cd9.jpg

Donstar Senior Enthusiast

Donstar

Posted
Posted

Congratulations on your new truck!  Are you keeping the VW as a second vehicle?  Small cars can be a hoot to drive after maneuvering a 20' truck around the malls at Christmas time!  The 6.5'  box will have more advantages than the shorter version and won't prove to be anymore cumbersome to drive.  I made the same decision with my last truck.  I was retired and didn't need extra load space but the truck I liked also came with the 6.5'. box!

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Needing this part.

      By newdude · Posted

      Just buy the tube and move on with life.  
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      Glad that worked, and in this case that is all on Autel for somehow dropping the ball for not updating the GMC section properly.    I believe in the basic section or unless it is in the advanced, when one does a check of lets say individual sensors for what the pressure is ( and it shows a temperature as well ) , I think it picks up on what the model number of the sensor is in a certain section where you choose "OE" sensor or at least mine is telling me what the model number is and matches to what they actually are and that is the number I quoted in a prior post.    I don't recall now if I had said prior that I discovered with my truck anyway that no matter how low I set the placard pressure for the rear tires, if the physical pressure is under 35 psi and I drive it for about 15 miles the pressure warning will come on for one or both rear tires. I am speculating that there is something else in the trucks system that over rides the placard pressure setting once it drops below that minimum pressure to run a metric LT tire at. The weird thing is it does not trigger right away after driving a shorter distance, it took that longer drive for it to trigger. Just something to keep in mind if you were experimenting with pressures below 35 pounds for a tire designed for lower pressures ( larger than stock floatation series tires ) and not being overloaded of course. 
    • No F-bdy Bs
      Supercharger (whipple)

      By No F-bdy Bs · Posted

      I've seen a scant few YT vids on them, but it's always in a performance application. 
    • No F-bdy Bs
      SERCICE ESC message?

      By No F-bdy Bs · Posted

      No clue. Service advisor said he'd call me this morning, which I'm 99% sure won't happen. They had the truck 5 days, and I didn't hear a peep. Finally had to call them yesterday. I guess they'd be content to just let the truck sit in perpetuity. 
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      I had a little bit of time before I left for work this morning, so I plugged the scanner back in, and I selected Chevrolet Silverado instead of GMC Sierra, and the very first option was for a 2026 so I selected that one and I seen at the bottom it had the option for psi change unlike in the 2026 GMC Sierra, I selected that option and it took a little longer than the usual vehicle not supported, and sure enough I got into it, and it let my change the psi values.. I no longer have the low psi warning light!   Thank you for recommending me to try it under Chevrolet instead! I can confirm this device does work for a 2026 GMC Sierra 2500 hd 6.6 diesel  just have to select Chevrolet Silverado instead of GMC Sierra.   Maybe I'll contact Autel and let them know of that issue and maybe they will fix it for the GMC option  because some people probably return the scanner due to it not working under GMC Sierra.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...