Jump to content

Recommended Posts

Posted

Hi,

I need to understand how the main and aux batteries are related. There is only sparse information in the vehicle User Manual. I believe all of my questions would be answered if I could see a wiring diagram. I found a service manual for my make and model on Helm Inc.'s website. It costs $350.00

Before I spend the $350, I thought I would try this forum.

If there is anyone here who knows about the Aux Battery and is willing to chat with me about it - Your help will be greatly appreciated.

 

I want to know how the Aux Battery is situated in both the cranking circuit (if at all) and how the Aux Battery gets charged (charging circuit)

Additionally, a somewhat related question would be; What exactly is the Battery Gauge on the dash measuring? (main, aux, alternator, all 3, what?)

 

Thank you in advance for putting up with such a newbie question. Guessing about things makes for bad troubleshooting. Just want to understand what I'm dealing with before I go poking around.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Posted

Im currently looking into this for my 1500. From what i understand the batteries are separated by this relay. Do you have a current sensor clamp on both neg battery cables? I am not for sure o. Which of the two the dash reads but I'd assume passenger side battery.23f220a1ca23fafd979ecbcdcf42a3ae.jpg

Sent from my LG-G710 using Tapatalk

Posted
On 11/26/2019 at 9:06 PM, Snowcamo said:

Im currently looking into this for my 1500. From what i understand the batteries are separated by this relay. Do you have a current sensor clamp on both neg battery cables? I am not for sure o. Which of the two the dash reads but I'd assume passenger side battery.23f220a1ca23fafd979ecbcdcf42a3ae.jpg

Sent from my LG-G710 using Tapatalk
 

Thanks Snow, I'm sure I do. This is the first I have seen of the terminology "Aux Battery Relay." So far I have seen automatic charging relay (ACR) and Battery Isolator. Something new to investigate. Finding an explanation has turned in to actual work. I appreciate the info you provided. Its a good lead. (no pun)

Posted

I have 3500 Diesel 6.6 Denali.

There is a battery charging management system built-in from GMC. Based on information in the Owners Manual under the "Battery Gauge" section, there is functionality sounding like what you would expect from a DC-DC Charger w/ Controller. However, the information only discusses the Main battery. There is no mention of how charging is handled for the aux battery anywhere in the Owners Documents. Including the Dura-Max Supplement. There is no charging controller listed on any parts breakdowns either. At this moment I am working from the assumption that either the logic is in the ECM, or the Aux Battery is a well guarded secret.

The cranking battery does have a large plastic box affixed to the top of the battery with a lot of high current wiring coming in and out of it. If there is a charging controller, that would be the place for it, and it would look about like that.

However, there is no mention of that box in any parts breakdowns either.

 

Do batteries come with big plastic boxes on top these days?

I was going to look up the AC-Delco battery model #, but the mystery box obscures the battery entirely. I can tell that changing that battery would not be a fun thing to attempt.

So far I have not been able to get that box open. I need a better flashlight.

 

 

Posted
29 minutes ago, rebrecs said:

I have 3500 Diesel 6.6 Denali.

There is a battery charging management system built-in from GMC. Based on information in the Owners Manual under the "Battery Gauge" section, there is functionality sounding like what you would expect from a DC-DC Charger w/ Controller. However, the information only discusses the Main battery. There is no mention of how charging is handled for the aux battery anywhere in the Owners Documents. Including the Dura-Max Supplement. There is no charging controller listed on any parts breakdowns either. At this moment I am working from the assumption that either the logic is in the ECM, or the Aux Battery is a well guarded secret.

The cranking battery does have a large plastic box affixed to the top of the battery with a lot of high current wiring coming in and out of it. If there is a charging controller, that would be the place for it, and it would look about like that.

However, there is no mention of that box in any parts breakdowns either.

 

Do batteries come with big plastic boxes on top these days?

I was going to look up the AC-Delco battery model #, but the mystery box obscures the battery entirely. I can tell that changing that battery would not be a fun thing to attempt.

So far I have not been able to get that box open. I need a better flashlight.

 

 

From posts on another forum I frequent, the Duramax's have dual batteries hooked in parallel, so they charge/discharge at the same time.  It's not a "main battery/auxiliary battery" situation.  They both are the "main battery".

  • Like 1
Posted
4 hours ago, davester said:

From posts on another forum I frequent, the Duramax's have dual batteries hooked in parallel, so they charge/discharge at the same time.  It's not a "main battery/auxiliary battery" situation.  They both are the "main battery".

I was beginning to suspect that. Now, things are beginning to make sense. Thank you for sending this along.

That sort of puts a new twist on "disconnecting the battery." I'll have think about that.

Posted
From posts on another forum I frequent, the Duramax's have dual batteries hooked in parallel, so they charge/discharge at the same time.  It's not a "main battery/auxiliary battery" situation.  They both are the "main battery".
Anything on the 6.0 gas engine setup? I wonder if they are the same. Its really difficult to find any info on second battery/ alternator setups. I have been wondering if any reprogramming would be needed to to bcm.

Sent from my LG-G710 using Tapatalk

Posted

No idea on the gas.  If they are hooked up in parallel, then there's no need to do anything special for the alternator, as it charges them both at the same time.

Posted

I have put the AUX battery in my gas truck. Really simple. I use it for my camper. I used all factory stuff. I didn't get all the parts from the dealer but they are all GM parts. On the 2500 its plug and play. I don't know about the 1500.

Quote

 

 

Posted
I have put the AUX battery in my gas truck. Really simple. I use it for my camper. I used all factory stuff. I didn't get all the parts from the dealer but they are all GM parts. On the 2500 its plug and play. I don't know about the 1500.
 
 
What's interesting is my 1500 came with a second battery tray from the factory. Do you have the relay in line with the batteries?

Sent from my LG-G710 using Tapatalk

  • Like 1
Posted

Yes. I have the one pictured above and the battery harness has a small square one attached to it as well. Mine had what looked like a battery tray as well, but it really isn't. These are the new battery tray parts.

image.jpg

Posted

I went to dealer lots and looked at trucks that had snow plow packages and  told them I was working on a project and could I look under the hood and got some # that way and the it all started to fall into place.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I would have to read back to get a better picture in my mind of some of the other comments and what they were using for a driving scenario they based the fuel mileage off of. That is why the fuel mileage conversation is extremely difficult to make fair comparisons from. If I was to be living in town and only driving around town, light to light and some longer stretches that doesn't have a light every block, and the usual stop at a grocery store and the bank and so on and so forth, my fuel mileage even during the summer time would be so bad with my truck I don't even want to know how bad it would be !. Then add in winter time and idling to warm it up to clear the windows and driving through snowy streets etc, large heavy trucks with gas engines have NEVER been worth crap for fuel mileage and why some little pot licker of a car with wheelbarrow tires and a 1300 cc four cylinder non turbo engine was the ticket to using a mere fraction of the fuel over a full size pickup.    By the way my truck has the 34" tires as its a HC but not the BFG KO3 tires ( that was an option for my truck but the sales guy couldn't figure out what the tires actually were so that never got on the order until it was too late to change the truck order ). So what fuel mileage your getting actually sounds good for "town driving" and with my truck when I go to town the fuel mileage keeps increasing as I get closer to town because it takes quite a while to get the driveline oils warmed up ( and why it always shows better fuel mileage on the return trip from town because its already warmed up ) but once I am in town that fuel mileage average just keeps dropping the more I mess around town and then has to recover back to something reasonable again by the time I get home for an over all average.    I'd be curious what your sticker says for the factory weight of your truck, mine is close around that 7700 lb due to the options it has. But anyway the long and short is, vehicle weight, higher rolling resistance heavy tires and a hefty driveline and a relatively large gas engine make for crap fuel mileage in stop and go scenarios, all one can do is drive it easy off the line at each stop and as my dad had said over the years, drive like a raw egg is under your foot and that's the best one can do. Years back with a carbed engine and if the carb was getting a bit out of tune etc as would the ignition system, the fuel mileage on pickups with larger engines was just awful compared to what your getting. We pay the fuel price penalty for driving HD trucks over some little vehicle, that is the reality. 
    • We had two Toyota’s with that engine in the mid 80s. We had 50 gallon fuel tanks, a toolbox full of tools, an air compressor and assorted parts for our equipment. We beat those up and down pipeline ROWs until we started buying diesel trucks. Then they became parts runners and first vehicles for our teenagers first cars. Our shop Forman wrecked them both two years apart when we hired him out of high school as an apprentice. Good thing he’s an excellent mechanic. It took awhile before he could be called a good driver.
    • I have a 2025 GMC Canyon Denali.   On a trip recently the engine failed.  The dealership diagnosed a bent valve and says there is a service bulletin that indicates to 'relace the engine'.  The truck only has about 14K miles and is under warranty.   The failure occurred 5/11/2026.   So far I have worked with GM Customer Assistance and Roadside Assistance.  Evidently no engines are available and nobody will offer a date when a new one will be.   Coming up on two months with no repair or timeline and no loaner from the dealership.   GMC Customer Assistance is 'ghosting' me and keeps closing the cases I've opened with no resolution.   Hoping someone can help me on how to escalate this issue.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...