Jump to content

Speedometer calibrators Hypertech or Rough Country

dieselfan1

By dieselfan1
in Modifications & Accessories

Recommended Posts

dieselfan1 Senior Enthusiast

dieselfan1

Posted
Posted

I'm going to need one of these. I'm going to 37" tires and my speedometer will be off by 10 mph @ 70. Not sure if the Hypertech is worth the extra $90. It seems they both do the same thing.

Anybody ever use one of these?

Is it complicated?

Thanks guys.

b5180d046bb5a1087fad49b99098049a.jpgd7ca09f6caeb035cb96eef9d63a60652.jpg

 

Sent from my Pixel 3 using Tapatalk

 

 

m3n00b Enthusiast

m3n00b

Posted
Posted

I have the hypertech.  Love it.  Got it for $208 from autoanything after asking for a discount.  The rough country probably works the exact same.  I chose hypertech because it's what my dealer uses on their lifted trucks and I have a warranty.

wforrest08 Senior Enthusiast

wforrest08

Posted
Posted

I have a Hypertech did this before I got tuned. This is also what my local Chevy dealer uses on the trucks/suvs they do. Very simple to operate. Also works if you do a gear swap the Rough County doesn’t specify if it does or not? If that’s something you might do down the road?
 

I’m usually all about buying new stuff for my vehicles but this is one of the few things where if I do it again on another one I’d probably buy a used unlocked one or a refurbished unit since it’s literally something you’ll use once or twice anyway. Most handheld tuners will also have this feature so even if you don’t use any of the “tunes” if you find a new/used/referb cheaper it will get the job done & be more desirable to someone else if you sell it someday. Just make sure if you go used it’s unlocked.
 

Autoanything.com has a low price guarantee that if you find it cheaper the will beat it buy a whole dollar. OH BOY I know but they also guarantee the price for a year so if you get one from them and come Black Friday when these are on sale everywhere they would refund the difference. I did this with my tonneau cover Truxedo had it cheaper but no free shipping got Autoanything to price match with free shipping. 

bc-chris Enthusiast

bc-chris

Posted
Posted

i bought the hypetech recalibrator and it worked perfect.  i put on 35" tires and my issue (other than the speedo being out) was pretty much every time i did a hard left turn the stabili-track system kicked in (sooooooo annoying!).

 

it was super simple to do - it just plugs into the truck, follow the prompts, enter your wheel height and wait while it does the install/update.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • TrueBlue
      Wow I'm in a pickle. (Broke down truck) and a story.

      By TrueBlue · Posted

      I gotta say, I'm enjoying your narration. The troubles you've been having are amusing as you describe them. It's good to see that you're finally getting some satisfaction out the old beast though.
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Declaring victory would upset the demons that possess this Blazer, so I won't. But I did make progress today--after it put up a fight. Always a fight.   I had the day off so I spent the morning cleaning up the shop and I thought I'd get ahead of things by filling the cooling system in prep for the final part I needed to arrive: the driver's side knock sensor. Glug, glug, glug....and then the unmistakable sound of liquid hitting the shop floor. It induces the same chagrin when the sonar and targeting laser temporarily malfunction during a late night bladder evacuation over the toilet with the bathroom light off. D'OH!!! That made a mess...   Oh, hey, that knock sensor I removed? It threads into a wet port. Who knew?! Learn something new every day. Put a pin in that chore, I'll fill it the rest of the way later.   The knock sensor arrived at about 1pm. I threaded it in, connected the wire, filled up the coolant, checked for leaks, and... drumroll.... fingers crossed for a perfect start, excellent timing, model fuel trims, and ...no squeaks... Here goes.....   No, it didn't start. At all. I cranked it a few times and it wasn't sounding good. Furthermore, I heard leaking again. Jesus H Tapdancing Christ, stop leaking all over the dang floor. This time I had accidentally overfilled the coolant reservoir and the churn of the water pump via cranking caused a bit to burp out. Ok, just, breathe... Put the flamethrower down. Dang thing wouldn't burn anyway, leaks too much...   Did you know the rotation of a round crank sensor in a round hole, matters? I do now. Took me about half hour to retrace steps and realize what I had done. Then it started right up.   No squeaks. The squeak was the old balancer.   Once it entered closed loop, fuel trims are dead on, hovering right around zero at idle. No more -30%. I'll credit the injector rebuild on that one.   Timing? I think there's an OBD 1.5 translation error with my Actron scanner. It's anywhere from -20 to -30 at idle, sometimes as high as -40 cruising. Sorry, the engine just isn't running that smoothly at -40 degrees ignition advance. It's just not. It's smooth all through the rev range and has decent power. I'm going to have to trust the seat of my pants on this one.   The new exhaust is very quiet. The old catalytic converter? Not melted, but definitely not healthy. Rains glitter when you turn it on its end...all the precious metal is flaking out. Once the new exhaust system burned in/smoked off a bit, the engine's exhaust smell is normal again. Not that I'd recommend going around huffing car exhaust, but, you know what I mean?   One problem to correct. The new exhaust has the opposite problem of the old spliced up exhaust. It wants to hit the floor where the old one wanted to rest on the cross member. Happy medium, please? Still noodling on that one, need to look at how I can adjust some hangers.   I don't know what's next. On one hand I want to run away from this thing as far and as fast as I can -- there have been a lot of NOT fun moments. On the other, now that it kinda drives nice, maybe drive it around for a little bit?   Shhh... it's not currently dripping oil all over the floor. I can see just a little wet at the bottom of the timing cover where it meets the oil pan seal. It's not dripping multiple drops with every ignition cycle, in fact, after some driving this evening it has yet to even form a drop that could drip off yet. But the weekend is young... I fully expect this could turn into Exxon Valdez by Sunday. Because this Blazer hates me. LOL.      
    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      About that:   Once upon a time in a land far far away lived a car company that was shy about taking your money and wanted to be sure that they gave you more that you asked for so that you'd come back. No really, not a fairytale. 😱   But after the field got thinned out enough to limit the competition it seemed good enough to give you only what you asked for. Fair enough I say but in such a market you have to give something the others are not or they go to the one who does. Gimmicks or glitz. Oh, fins and chrome. Yea, shinny crow like cars. Yum.    Field narrows a bit more and 'brand loyalty' becomes a thing and the minute it does they start thinking to themselves, "Could we make more money if we gave them less than they expect and they will hang in there for brand and comfort with the known?" They gave it a try and da*n, it worked!!    Well, what if we teach them, groom them into believing that less is "Normal" and cut some more corners. Will that work? Oh heck yea!    🤔 I wonder, can we give then WAY less than they expect and make them mad enough to spit nails and STILL get them to pay up? Sure, if we get everyone else to do the same so that the choice is less or nothing at all. How would be do that? Platform sharing.  What a concept, right?  Steal like there is no tomorrow and it's legal too!    Truth is no one is going to give up driving, not for very long. The Gen Z crowd is fine with it and will be as long as someone not Gen Z will haul them around. At some point we all die.    Economic voting only works if you cast a NO vote now and again and enough of them to get dumb and dumber to wise up. Well, that's how I was taught anyway. And it should have worked. Would have worked. But the Bail out!!   Look, you have another choice if  you take that bag off your head. If the dumb it down to some predetermined expectation of how John Q Public will use it the, that is under design it to failure they you use it to a lower stress mode. D'ho!    A 1950 Royal Enfield Bullet 500 will go anywhere a Suzuki Hayabusa will and for just as long. But you will have to treat it for what it is and not for what you wish it was. 
    • Vu1can
      Bridgestone vs Goodyear tires?

      By Vu1can · Posted

      Maybe I was just too unlucky, but I had nothing but bad luck with Bridgestones. Out of 3 sets, they all started losing a lot of air when they got down to about 1/2 tread life, and at that point also wet traction suffered more than it should have. Also, the only tire I ever had in my 60 years of driving that had a side wall blow out was a Bridgestone.   I'm currently running Goodyear Wrangler Workhorse AT and am very happy with them.   
    • davester
      Broke Down on the Mountain

      By davester · Posted

      maybe when the trip is over, check all the other joints in the front end, like all the ball joints, tie rods, pitman & idler arms, etc...

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...