Cruise control Cruise control engaged

By Andrea Pittman
April 23, 2020 in 1988-1999 Chevrolet & GMC C/K GMT400 Platform

Recommended Posts

Andrea Pittman

Posted April 23, 2020

And won't disengage!! 1996 Chevy K1500 Silverado 4x4 pickup with 5.7L vortec cruise won't shut off, truck won't shift into OD and stay. Shut the engine off and recranked it and motor revs like you're flooring it. Anyone know what causes this or how to fix it?

Steven_R

Posted April 24, 2020

Check for binding in the throttle with the engine off. Then disconnect the cruise control cable at the throttle body. Check for binding again. If no binding, start the engine to test. This doesn't fix anything, but might tell you some things.

Good luck

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

Similar Content
- 2020 Sierra cruise control not working
  
  By Sawito, November 27, 2020
  - cruise control
  - Sierra
  - 4 replies
  - 17,845 views
- Cruise control
  
  By George Baker, October 20, 2020
  - SWC
  - cruise control
  - (and 1 more)
    
    Tagged with:
    
    SWC
    
    cruise control
    
    wiring for radio
  - 0 replies
  - 1,611 views
- Can I add/retrofit Adaptive Cruise Control to my 2019 Sierra 1500?
  
  By Mike Travis, May 14, 2020
  - cruisecontrol
  - cruise control
  - (and 2 more)
    
    Tagged with:
    
    cruisecontrol
    
    cruise control
    
    adaptive cruise
    
    adaptive cruise control
  - 10 replies
  - 30,472 views
- 2005 Yukon Denali XL cruise control not working
  
  By Virginian Truster, March 6, 2020
  - cruise control
  - cruise not work
  - 3 replies
  - 6,501 views
- Remote start not working GMC Sierra 2500HD 2008
  
  By Clare Burns, January 31, 2020
  - 2008
  - Sierra
  - (and 4 more)
    
    Tagged with:
    
    2008
    
    Sierra
    
    2500HD
    
    Remote start
    
    Brake light switch
    
    Cruise control
  - 2 replies
  - 10,559 views
Recently Browsing 0 members
- No registered users viewing this page.
Forum Statistics

250.3k
Total Topics

2.7m
Total Posts
Member Statistics

342,691
Total Members

8,960
Most Online

Newest Member
jkptuned
Joined 5 hours ago
Who's Online 15 Members, 0 Anonymous, 1,155 Guests (See full list)
- tigers2007
- 3CarSeatDad
- Coastie05
- revmanii
- CamGTP
- Chuck FB
- MikeBMW
- Another JR
- KARNUT
- 2016 Sierra Owner
- davester
- Jack Horn
- lorenzo5100
- JC702
- vetlac416

Latest Articles
- GM Recalls 2,700+ Trucks For Airbags That Can Explode While Parked – How To Check Your VIN
  Wednesday at 07:54 PM
- You Can Completely Disable A New Chevy Traverse By Bending The Rear Wiper Arm (No, Seriously)
  Wednesday at 05:47 PM
- Should You Use Engine Fuel Additives In Chevy or GMC? Here’s GM’s Official Statement.
  Wednesday at 02:38 PM
- We’ve Driven the Edition 1 For 4 Years. Here’s Why the Mid-Size HUMMER X Concept is Exactly What GMC Needs.
  May 29
Posts
- RUMOR / INSIDER: 2027 Silverado Dealer Reveal NEXT WEEK
  
  By 2016 Sierra Owner · Posted 19 minutes ago
  
  Probably not at this time on the HDs. They are usually 1-2 years refreshed behind the 1500s. I'm really surprised they have not at least shown something of them yet. It's only a few months left before the new model years hit the dealer lots.
- Grumpy Bears 2015 Silverado 2WD
  
  By Grumpy Bear · Posted 51 minutes ago
  
  Fuel Update 6/7/2026 Since getting Pepper back I've been blending fuel. 50/50 E-85 - 93 pump gas. At my local pricing that is a 97 octane fuel for the price of regular and metering 48% alcohol. This much gasoline octane locally is $10 a gallon with only one local resource!! I can blend this anywhere I find E-85. Why? Longer range. Same no KR timing pull. More lubricious fuel. No loss in power cylinder cleanliness and a reasonable chance at seeing any future fuel dilution in the UOA's. When I blend with Shell or XOM premiums there is some friction modifier and antiwear enhancement. No cold weather starting issues either. So lots of pluses and few losses.
- Fluid Change Questions
  
  By Chuck FB · Posted 1 hour ago
  
  That's certainly good to hear that there was nothing alarming on the cover magnet volume wise or chunk wise of metal. I don't recall if the Banks cover holds more oil than the factor cover, what volume did you estimate that it took ?. As to the transfer case I assume you bought whatever brand you wanted of a Dexron VI automatic transmission fluid. Have you changed the automatic trans fluid at some point and actually I don't recall if your truck is the gas or diesel version as that makes the difference as to which transmission and oil type is required in 2023. The problem with my truck is that its the gas engine with the 10 speed and I've not yet attempted to see if I can drop the pan as the silly exhaust is right in the way and I do not want to touch the exhaust system on the manifold end if I can help it, the diesel does not have the Y pipe style exhaust under the pan so is not an issue to remove the pan.
- 2014 GMC Sierra 1500 w/5.3L auto, 4wd, Crank but no start, 2MPA high pressure fuel reading
  
  By Stacey Jaeger · Posted 1 hour ago
  
  I have a 2014 GMC Sierra 1500 with 5.3 litre, with 400,000km. I drove it one morning and when starting later in the day it would crank but not start. I figured it had to be the fuel pump, SO i replaced the low pressure fuel pump in the tank. The problem persisted the exact same way, crank but no start. Checked a couple plugs and was getting spark. I then replaced the high pressure fuel pump under the intake. But the same problem persisted, it tried to start right after the high pressure pump replacement for a few seconds but then just cranks. I plugged in a better scan tool with live data and I can see the low pressure pump has the proper pressure but the high pressure pump is only getting 1-3mpa, when the scan tool says it should be 14mpa. The scan tool says the lower pressure fuel is in the 55-60psi range and it hold this pressure when not cranking. But the scan tool shows the high pressure fuel drop down from 2mpa to 0. I am not sure where to go from here, any recommendations or experiences with this condition? High pressure fuel rail sensor replacement?
- injector cleaner 2021 2.7 1500 silverado
  
  By Coastie05 · Posted 1 hour ago
  
  Have you had any issues with your 2.7? I’ve only heard of a few with that kind of mileage so far. OP, I haven’t read anywhere that carbon buildup is an issue. Just make sure to use top tier fuel. They claim that it’s better than non top tier. I’m not sure about that considering my FIL has delivered fuel for years and said it’s all exactly the same.
GM-Trucks.com Clubs
- Black Truck Club
  
  Open Club · 612 members
- White Truck Club
  
  Open Club · 380 members
- Canadian Owners Club
  
  Open Club · 282 members
- Red Truck Club
  
  Open Club · 156 members
- diesel 3.0
  
  Open Club · 279 members
- Texas Owner's Group
  
  Open Club · 371 members
- NorthSky Blue Club
  
  Open Club · 118 members
- Midwest Owner's Group
  
  Open Club · 212 members
- 2015 Custom Sport Club
  
  Open Club · 5 members
- GM Snow Plowing Club HD
  
  Closed Club · 14 members
Popular Contributors
- Week
- Month
- Year
- All Time
1. 1
  
  KARNUT
  23
2. 2
  
  Atlas
  17
3. 3
  
  diyer2
  8
4. 4
  
  Grumpy Bear
  6
5. 5
  
  GAMark
  5
Show More