Jump to content

New here...

keefsmif

By keefsmif
in New Member Introductions

 Share

Recommended Posts

keefsmif New Member

keefsmif

Posted
Posted (edited)

Happy to be here. First GM truck in 24 years! Bought this ‘20 Sierra 4x4 base a month or so ago and dig into it a bit. 
aside from interior bits like console storage, mats, trim and some audio, i lowered it 3/4” with a combo of Beltech front 0-3” shocks, that have completely transformed the ride. I was disgusted with how floaty and wallopy the stock suspension was, so opted for the shocks only i lieu of spindles. Couldn’t be happier, highly recommend replacing the shocks whether you’re going up or down.

 

Rear is a Maxtrac 4” axle flip kit. Beautiful kit, installed quick and near seamlessly. There is no C Notch with this kit as i was just unwilling to cut the frame. I cut the brake line holder tabs off the axle, but didn’t cut the bump stop plates off the frame either. For the extra 1/2” of clearance, i couldn’t justify it. I do hit the stops as is though, so some modified sprinter sumosprings are going in in place of the bump stops. I like the idea of the added load, have been very happy with sumosprings in another truck and also replaced the rear swaybar purchase with the sumos to battle rear sway. Wish me luck. 
 

GM accessory wheels were financed with the truck, but I’ll replace them before spring I’m sure. They just don’t do it for me. 
painted the bumpers silver as well and am really happy with that. Range AFM disabler and AFM Jr intake with dry filter is installed for a bit more throat.
Overall, very happy and excited for more tuning options to arise.

321531DF-64CF-44E4-ADB0-DFB95E4B7DD9.jpeg

F1DC8AAD-3220-448D-A432-918CBF5FB83D.jpeg

Edited by keefsmif
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined

  • Who's Online   6 Members, 0 Anonymous, 1,441 Guests (See full list)

  • Latest Articles

  • Posts

    • DaleB
      No Software Updates - Old Build

      By DaleB · Posted

      Hi all - my current truck is a 2022.5 1500 High Country 3.0. I bought the truck used last year. After doing some digging, I noticed that my truck's software is stuck on the original build from 2022. I have no available software updates. I talked to my dealer about this and they recommended not trying to force an update since the 36,000 mile warranty is expired. This is a big bummer since there have been many major releases since that have fixed small issues and improved speed/usability.   For reference, the current software build number is: full_gminfo37_gb-user 10 W158E-W164.4.2-QIH22B-563.3 158 release-keys Has anyone had a similar experience? Should I just forget about it and move on, or try a different dealer?
    • B07
      Needing this part.

      By B07 · Posted

      Sure. Buy it for me 🤣
    • B07
      Needing this part.

      By B07 · Posted

      Using zip ties but 2-3 they snap due to sharp edges. Just using a shoestring. Last longer. 🤣
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      I ordered the Snap On...waiting for it to come in later this week or early next week.   New front cover, new crank seal and new balancer are on. Water pump, pulley, fan, hoses, and plastics reinstalled. I can move forward knowing all my timing marks are dead on and the front engine is hopefully sealed better than it was. Take 2 with the water pump...trying high temp thread sealer on the lower bolts.   Rebuilt injector and new-new regulator is in, it looks like new. Top intake reassembled and all the bits are reconnected and snugged down.   Thinking about knock sensors again, I located both of mine and, there's your problem, Francis... The driver's side one is broke, plastic is bashed in, part of the wire is bare, and it appears to have been damaged like that for a long time. I saw the wire but didn't think anything of it. The knock sensor might not be my pulled timing issue, but it sure looks suspect. It must still be conducting, otherwise I'd expect a CEL. But perhaps with its sacred crystal inside exposed, jilted and dirty, maybe it's sending mixed signals. So I'm waiting for one of those and a new pigtail to come in. Pass side sensor looks good, except for the spark plug wire resting on it (!). The plug wires are healthy so it shouldn't be causing an issue, but I separated them and added zip ties to nearby looms to keep everything well apart.   So, I'm down to installing a knock sensor AND, oh, replacing the exhaust and cat. I actually think that's going to be fairly easy, it's all bolt-together, all new stuff from Walker is laid out on the shop floor ready to go. Hopefully have this thing on the road again for the weekend.   My luck? It will still be leaking oil, coolant, pulled timing, intermittent CEL for running rich, or it probably won't run at all -- because that's how this project has gone.   I've never worked on a vehicle so ...hurt? ...cursed? in my life. Everything has been effed with SO HARD, but I think...knock on wood...I've managed to undo all the backyard stuff and we're almost reset back to "just" an 80k mile, 30 year old Blazer.
    • PunchT37
      Would this CV Shaft be bad?

      By PunchT37 · Posted

      Yes. You need to check out that thing, and the hub further.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...