Help- dealer can’t find a part- GM 2” lift suspension kit

[Transient]

 
 
10-4
 
So, not sure where your first # came from, but that's not a good #.  The current p/n you have is correct 84768243.  GM shows ship direct on it but it will backorder so they are probably on backorder.
 
If you are willing to call/drive, I show two that might be close to you.  There is a 84768243 showing at Pellegrino Buick GMC in Williamstown NJ, and under the old #84649981 there is one at Faulkner GM in Trevose, PA.   

I use to live in Feasterville-Trevose, PA. Faulkner GMC was a really good dealership to deal with, imo. They are on Street Road. Just take the PA Turnpike to the Street Road exit and head west for a little bit. In my experience they're very fair to deal with.

Sent from my SM-N960U using Tapatalk

[campinfamily]

I ended up scratching the GM lift and found a great place in NJ to bring my truck. Replaced the CV and put Bilstiens all around and 2.25” ready lift in the back. Raised the front 2.75 with the Bilsteins so still has some rake. Love the ride now too, so smooth. Next new UCA and some new rims and wheels. [emoji23]

[SilveradoRST]

1 minute ago, campinfamily said:

I ended up scratching the GM lift and found a great place in NJ to bring my truck. Replaced the CV and put Bilstiens all around and 2.25” ready lift in the back. Raised the front 2.75 with the Bilsteins so still has some rake. Love the ride now too, so smooth. Next new UCA and some new rims and wheels.

What new CVs did you get, brand?

[campinfamily]

What new CVs did you get, brand?

OEM GM part. It was the half axle on passenger side as the Boot was ripped from a shoddy installer, when the original leveling pucks were put in.

[SilveradoRST]

8 minutes ago, campinfamily said:

OEM GM part. It was the half axle on passenger side as the Boot was ripped from a shoddy installer, when the original leveling pucks were put in.

Sorry, I should have read your first post.  Glad it worked out for you.  Share some pics if you have any.  

[campinfamily]

Sorry, I should have read your first post.  Glad it worked out for you.  Share some pics if you have any.  

No worries- just glad it is all fixed. Not a great pic, will another tomorrow.

[lapoolboy]

@newdude

 

Do you show any of the 4wd kits in stock anywhere in the southeast?  Looking for one and I'll call around to see if they'll ship to me if too far to drive for it.

 

Thanks!

[GxOxBxLxN]

@campinfamily did you have to add a 2" spacer to get everything leveled after the kit was installed? just had the gm 2" leveling kit installed and still have a front rake.