1-2" lift options for 3.0L diesel?

[James Eberhart]

I believe the only one available at this time was the spacers.

 

Drives great!

 

Need to adjust the headlights a little...getting flashed a TON more now

[Phildosaurus]

Digging an old thread out of the grave here, but for any of you GMC folks that have installed your own kits - did you have any issues getting to the nuts for the top of the struts? As I dig around in my 2021 3.0 Sierra, 4 of the 6 upper strut bolts have retaining clips for various plastic housings attached and only a couple seem to come off easily. Am I not being aggressive enough or do I need to look for other fasteners holding that stuff in place? Clearing the crap out of the way is conveniently omitted from all of the install videos that I can find - they all just simply say "remove upper strut bolts"...  

[Ioniq MPG]

12 hours ago, Phildosaurus said:

Digging an old thread out of the grave here, but for any of you GMC folks that have installed your own kits - did you have any issues getting to the nuts for the top of the struts? As I dig around in my 2021 3.0 Sierra, 4 of the 6 upper strut bolts have retaining clips for various plastic housings attached and only a couple seem to come off easily. Am I not being aggressive enough or do I need to look for other fasteners holding that stuff in place? Clearing the crap out of the way is conveniently omitted from all of the install videos that I can find - they all just simply say "remove upper strut bolts"...  

 

Be more aggressive with a pry bar and pop that plastic harness holder up and out of the way. It will go back into place and stay when you are done. It does seem like you are going to break something, but it should hold up well.

[Phildosaurus]

Thanks, GK!