Jump to content

Active Grill Shutter question

Reid Kahrs
 Share

Recommended Posts

W4LWQ Enthusiast

W4LWQ

Posted
Posted
On 3/10/2023 at 10:27 AM, Ronjon said:

I'm going to gut them when I install a new bumper and tranny cooler. Hopefully between the tuning companies now available (RunVSE and PPEI) they can remove their p codes. Since the dealership won't flash them out.

Any movement yet?

 

  • 7 months later...
Paolo New Member

Paolo

Posted
Posted

My 2017 Sierra is giving the U1051 code. The louvers are stuck in an open position which is okay for me but the check engine light is always on, which is bad for me in the case something else malfunctions. If I disconnect it will that clear the code? I also saw ebay has just the actuator available for a fraction of the whole assembly cost. Will replacing that clear the code? As long as I can get the code cleared I am not overly concerned if the dampers open and close. Clearly its just something else that can break on these newer vehicles. Thanks for any help!

  • 1 month later...
Ronjon Enthusiast

Ronjon

Posted
Posted

The actuator moves, it's just the motor sitting there now by itself. Still throws the code, I wish someone sold a bracket with limit stop to truck the motor and stop throwing the one and only code my truck has ever given me.

newdude Senior Enthusiast

newdude

Posted
Posted
On 12/20/2023 at 1:26 PM, Paolo said:

My 2017 Sierra is giving the U1051 code. The louvers are stuck in an open position which is okay for me but the check engine light is always on, which is bad for me in the case something else malfunctions. If I disconnect it will that clear the code? I also saw ebay has just the actuator available for a fraction of the whole assembly cost. Will replacing that clear the code? As long as I can get the code cleared I am not overly concerned if the dampers open and close. Clearly its just something else that can break on these newer vehicles. Thanks for any help!

 

 

No.  Shutter is a LIN BUS device.  Needs to be operational for the CEL to go away.  

Ronjon Enthusiast

Ronjon

Posted
Posted

And to be clear, it needs two hard stops to register as functioning? I need to get my 3d printer up and running if that's the case and make a stl.

  • 1 year later...
jragan Enthusiast

jragan

Posted
Posted

Just ran across an engine light that is indicating this. 

 

Shutters are stuck closed and im missing the top left shutter completely. 

Not sure how big of mess this is. any help is appreciated 

newdude Senior Enthusiast

newdude

Posted
Posted
50 minutes ago, jragan said:

Just ran across an engine light that is indicating this. 

 

Shutters are stuck closed and im missing the top left shutter completely. 

Not sure how big of mess this is. any help is appreciated 

 

 

Some shutter assemblies on these are intentionally missing the top left.  That is normal.

 

You need to replace the shutter if you have a CEL and code for it.  Simple as that.  Make sure you get the right shutter with the 2.7 as it has an upper and a lower.  Scan the code and it should call out shutter 1 or 2.  

jragan Enthusiast

jragan

Posted
Posted
1 minute ago, newdude said:

 

 

Some shutter assemblies on these are intentionally missing the top left.  That is normal.

 

You need to replace the shutter if you have a CEL and code for it.  Simple as that.  Make sure you get the right shutter with the 2.7 as it has an upper and a lower.  Scan the code and it should call out shutter 1 or 2.  

my codes are U0285 and U1345

Engine light is on, comes back on start up after clearing 

newdude Senior Enthusiast

newdude

Posted
Posted
2 minutes ago, jragan said:

my codes are U0285 and U1345

Engine light is on, comes back on start up after clearing 

 

 

 U0285 is Lost Communication with Active Grille Air Shutter 2 Motor Module. 

 

Shutter 2 is the lower shutter in front of the charge air cooler.  

 

Before you replace it there are some things to check and test. 

 

READ HERE - WIRING TESTING AND INSPECTION FOR SHUTTER CODES - 21-NA-077 1..5

 

READ HERE - MC-10253068-9999.pdf

jragan Enthusiast

jragan

Posted
Posted
8 minutes ago, newdude said:

 

 

 U0285 is Lost Communication with Active Grille Air Shutter 2 Motor Module. 

 

Shutter 2 is the lower shutter in front of the charge air cooler.  

 

Before you replace it there are some things to check and test. 

 

READ HERE - WIRING TESTING AND INSPECTION FOR SHUTTER CODES - 21-NA-077 1..5

 

READ HERE - MC-10253068-9999.pdf

Looks like a nightmare 

 

thanks!

  • 1 year later...
Partsguy198 New Member

Partsguy198

Posted
Posted

GM has a bulletin out for the 2019 PPV Tahoe's. They actually remove the shutters, leave the frame and motor in place and program out the fault codes.

 

"PIT6052 Active Grille Air Shutter Eliminated On Police Tahoe"

 

Too bad we can't all have that option.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Tyler Gibbs
      Travel Trailer 2024 2500 HD 6.6 Gas Engine ?

      By Tyler Gibbs · Posted

      The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • sFrank
      2026 Silverado Range AFM DFM ECU loaction

      By sFrank · Posted

      So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • No F-bdy Bs
      Dave's Auto (custom engine builder) tear down of L8T

      By No F-bdy Bs · Posted

      Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      "Life is getting back to normal."    I'm driving again and all new joints are operating as expected for this stage of recovery.   My most recent joint replacement still requires a lot of attention but experience has taught me that time will quiet the remaining pain.  I joked with my surgeon that another joint replacement would take my mind off my most recent surgery and he responded by saying the next will be a hip!  There are no plans for another surgery but, unlike me, I don't think he was joking!  I certainly wouldn't refuse further replacement  if required but hope to spend time out of the "post-op"  period.  I can't stress enough that if you have been recommended for total hip, knee or shoulder replacement that you welcome the offer.  Post-op "recovery" may sound daunting and painful, however, this is far better than the insidious erosion of mobility you are currently experiencing.  Imagine what it would feel like to wake up most mornings feeling better and more mobile than you did the previous day!  Prior to my first surgery in June 2025, even getting out of bed was becoming a formidable task.  Since the day after my first surgery, I get out of bed everyday easily and unassisted.  Making the switch to feeling a little better each day rather than a little worse, is hugely motivating!
    • Coastie05
      ‘25 Silverado purchase- back to dealership for bumper/radio issue

      By Coastie05 · Posted

      Hope it all works out for you. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...