Jump to content

Dmax 3.0 Adding second battery?

Phatty

By Phatty
in Modifications, Wheels & Tires

 Share

Recommended Posts

Phatty Enthusiast

Phatty

Posted
Posted

Search feature is pretty unusable and did not turn up anything on this.
I am looking to add a second battery inside engine compartment to wire up a 2000w invertor in the bed to.  The idea is that the second battery would be used to handle whatever I want to run off the invertor while driving or parked.
Yes I can just put second battery in the bed of the truck, throw in an isolator and wire to primary but I am looking to see if anyone has done a second battery under the hood, I would prefer not to have a battery in the bed of the truck.  Something a little more factory and a little cleaner if possible.

  • 4 weeks later...
Juggsauce Enthusiast

Juggsauce

Posted
Posted

I'm afraid I pretty much did what you don't want to do and put the battery in the bed with an isolator. But there was no way I could have fit the Renogy 200 A/hr battery under the hood either. I'll definitely throw out there that with the DPF in the engine bay, you're gonna have a bad time if you mount a battery on the passenger side without significant heat shielding. Best thing I can think of for low key mounting would be a non-vented battery under the passenger seat or a compact lithium battery on the driver side of the engine bay. Those body frame rails really cut into the usable space under the hood in these trucks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • No1UKnow
      Transmission Woes :-(

      By No1UKnow · Posted

      Well, I received a message from the dealer...
    • Atomicgrl
      ‘25 Silverado purchase- back to dealership for bumper/radio issue

      By Atomicgrl · Posted

      The no sound problem is the audio amplifier. The audio amp has a heatsoak issue in some circuitry which causes it to miss the wakeup handhake. If it doesn't respond within a certain time parameter, then you get no sound. I brought it in and had the software update, but after further testing the tech made the call for a new audio amplifer. The software update I belive gives more time for the amp to respond, but if the amp is defective then you can still get no audio at times. After the update it went 12 days before no sound. After doing some research, apparently the fix is a new (updated) audio amplifer, the circuitry internally has been improved to better deal with heat. I had to wait 2 1/2 weeks because at the time, it was on backorder with no eta. Well the amp came in earlier this week. I had the amp and programming work done today. After picking it up I stopped at a few places, and whenever I started my truck, the audio was on instantly, so whatever they did it appears to work because it's never had sound that quickly......Hope this helps
    • Jus Cruisin
      Rear Crew Cab Door Wont Open

      By Jus Cruisin · Posted

      Make sure the latch mechanism is properly greased. Look at the catch for fresh marks/scratches. And see if it has moved a little, too. 
    • PBNB
      Thoughts on these wheels?

      By PBNB · Posted

      I have the 18" black mutilspoke wheels that came with my truck. I like them as they are very subdued and look good with the 295/70's    I am sure that the next set of wheels I get will be some after market all black wheels. Or maybe some AT4X wheels.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Interesting question which you partly answered in the word 'potentially'. I think that is going to be a 'point of reference' inquiry. What are the touchstones?    This will sound petty but it is the main source of end fighting in threads on this topic. Define a motors "Life". Think about the various arguments that have been entertained on these pages in that very argument.    I can only speak from my viewpoint. Engine "Life" in my world is defined by power cylinder integrity. For the majority of engines it is the bore/ring interface that quits first. Loss of seal. Oil consumption and loss of power. Most Pro motor builders would agree and there is a good deal of information on using "Leak Down" as a primary indicator of bore integrity. At home a compression test is more the thing. If we can agree on that then I think CC Jensen has done its homework and I'd find it valid.    Now by my own definition, Dizzy, wife's Ecotec 2.4 I-4 has been dead since about 80K miles. And yet we have logged over 200K miles more on it. "Life" and "Usefulness" are therefore independent.      I know a mature fella right now who has just hit 300K on a Mitsubishi 3A92 NA MPFI motor and has done compression test every 100K. It was 205 psi after break in and is now about 195 and still even. He uses shelf oil but good filters and adheres to a 3K mile OCI. He even do UOA's on each of them for the first 50K.      I also know a fleet mechanic with that same motor that gets 300 to 500 K out of them but the are oil using, wristpin sloppy, skirt slapping motors. He ran one with a piston pin so loose the piston was bouncing off the cylinder head for about 20K miles before he called TOD. Both of them claim success.         

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...