Jump to content

Recommended Posts

Posted

It seems with so many sellers of aftermarket towing mirrors I was hoping to get a thread going of member reviews.  There are so many options and sellers at all ends of the price point (Trail Ridge at IAAuto, American Trucks, Boost Auto, etc. and then on the other end of the spectrum you have the Amazon and Ebay sellers).  Yet, we know the aftermarket mirrors are not being manufactured in US for a specific retailer and are being sourced overseas and/or sold via private label (Trail Ridge).  I suspect the fully optioned power folding mirrors being sold at the higher end of the price point could be sourced for much less if a side by side product comparison could be done to determine which of the lower priced mirrors being sold on Amazon and Ebay are getting sourced and sold at the higher prices.  I am hoping that some members can share their reviews to help since a side by side comparison would be difficult and fairly costly.

  • Like 1
Posted

Great idea. I'm all ears . I'm thinking about the boost auto. But the Trail Ridge are nice too( Phil Gamboa recommended)
Lets see what you got and why you like them .

Sent from my Pixel 3 using Tapatalk

  • Like 1
Posted

I purchased mostplus brand off eBay for $250. Everything works great and these were for the power folding as well. The glass does shake a bit going down the highway but nothing terrible. I couldn’t bring myself to spend 600-800 for mirrors

  • Like 1
Posted
3 hours ago, Lspoo19 said:

I purchased mostplus brand off eBay for $250. Everything works great and these were for the power folding as well. The glass does shake a bit going down the highway but nothing terrible. I couldn’t bring myself to spend 600-800 for mirrors

This probably only had the three screw posts versus four?  If so, do you think the vibration could be shored up with drilling the fourth screw post?

Posted
2 hours ago, UnlimitedMatt said:

I bought brand new factory mirrors, new switch and wiring harness from Phil Gamboa.  The most expensive option but I wanted everything to work together with zero issues.  

 

@pgamboa

http://harnessdr.com

As in factory and not the GM Genuine (Chevrolet Accessories) trailering mirrors (non-power folding)?

Posted
20 hours ago, 6.2Creedmoor said:

This probably only had the three screw posts versus four?  If so, do you think the vibration could be shored up with drilling the fourth screw post?

These did come with 4 posts and I did drill for that fourth post

Posted
On 2/19/2021 at 12:50 PM, 6.2Creedmoor said:

As in factory and not the GM Genuine (Chevrolet Accessories) trailering mirrors (non-power folding)?

I got the power folding tow mirrors. Pgamboa called them: GM PowerFold Tow Mirrors

 

They were over $1000 for the set.

 

Posted

$1000? No wonder they call call you unlimited Matt.


Sent from my Pixel 3 using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • It wouldn’t have happened if the government hadn’t mandated outrageous fuel mileage standards. It does very little for the consumer. It adds cost. Back during Covid there was a chip shortage. They gave a rebate for your truck if it didn’t have the chip to turn on cylinder deactivation. It was 50$ because at best you may see 1/2 a mile increase per gallon. Splitting hairs each fuel mileage trick wasn’t mandated. The government doesn’t do the engineering work and say use this until it’s already in use and they like it. The fuel mileage was mandated. And those add ons the results. There’s a mandate and they are the results.
    • It was never mandated.  Ever.    Automakers were incentivized to install it by getting CAFE credits to help with their vehicle fleet fuel economy scores.  They were being handed money/CAFE credits to install it.  Which is NOT a mandate.       The current admin removed the incentives that were behind them installing it.       
    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...