Jump to content

Tailgate won’t come down with TruXedo TruXport tonneau cover

GN2018
 Share

Recommended Posts

Andrew Garrison New Member

Andrew Garrison

Posted
Posted
On 4/9/2021 at 2:17 PM, GN2018 said:

I took it to the installer today and have good news.  We gave it some thought and he was going to make some adjustments.  Then I said, "my friends on gm-trucks, talk about moving tonneau covers forward to handle this."  He looked at it and said that he could probably move it up a 1/4 to 1/2 inch and would try that.  It pretty much worked.  There's just a little lag before the tailgate drops, but it does drop.  Maybe it will loosen up in time.

 

In reading here and thinking about it, there seems to be a balance between the cover letting the tailgate operate correctly and letting water in.  There will be plenty of rain this weekend, so I'll see if it leaks.  Frankly, I can live with a little water intrusion over it not operating correctly.  I suspect the water will just run down the tailgate and drain.  It's not like the bed it's made to shed water.  Plus, I don't have anything in it except my clubs and a little (stress "little") water isn't going to hurt anything.  It's not a car trunk after all.  We'll see if he got the balance right.  It looks like there's a good chance he did.

 

Now, just have to keep an eye on my rear slider for leaks.  But that's another thread. :)

Sounds like it might have worked. Any feedback after the recent rains? Thanks! 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • StingerZ16
      Wow I'm in a pickle. (Broke down truck) and a story.

      By StingerZ16 · Posted

      Looks tight. Not a lot of working room. Hows yous knuckles?
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      Spot on. The government makes ridiculous mandates, and this causes manufacturers to jump through hoops for every TENTH of a MPG. Main reason quality is in the toilet and prices are in the stratosphere.   The gov't tightened the MPG requirements so much 5 years ago that the only way manufacturers could meet these absolutely ridiculous numbers was to go all EV. Hence the push.     Nobody hates good MPG, Atlas - nobody is "whining". Your side has that trait all locked up. What a stupid argument attempt!   What I particularly hate is the government meddling in the free market system. Had this system been allowed to work as designed and intended by our Founders, cars and trucks would be hitting numbers that would blow our minds, all while costing 30% LESS. Not only that, but engines could probably hit 150k miles again without needing major internal surgery.   My forty year old Ford 302 has 312k on it. Wonder what changed?🤔
    • revmanii
      Starting a new thread regarding mounting my 2014 OEM wheels to my 2026

      By revmanii · Posted

      The BORA 3/8" spacers arrived yesterday along with the extended lug nuts. I got the front wheels changed out today, but was overheated and covered in sweat so bad, I figured getting both front wheels done was a win, and took a cool shower. Hopefully, I'll go out tomorrow morning before it gets into the 80+ temps and do the backs. After getting the first wheel snugged up, I backed out one of the lug nuts then hand turned to count threads. I believe I stopped counting around 12-13, so I think I'm good there.    
    • Atlas
      2027 GMC Sierra: Official Discussion

      By Atlas · Posted

      My fullsize truck is averaging over 26mpg so I'm pretty happy with the increased fuel economy targets. When I had my gas Silverado (2020 5.3) it was averaging 21. Again, for a fullsize truck, that's very different from the 12-15 these things used to get 30 years ago.   Whine all you want, increased MPG is a good thing.
    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      That is a fair point, and I think an OBD-first proof is probably the right next step. I agree that the value is not the hardware box by itself. The marketable part would be the software: always-on capture, baseline learning, event reduction, system-specific reports, and alerts. Also agreed that if an OBD device is always plugged in and has local storage, it should not miss the event in the same way that a scanner plugged in after the fact would. The only thing I would not want to assume yet is that an ELM327-class device gives all the late-GM data needed at the rate needed. Standard OBD live data, DTCs, freeze frame, Mode 6, VIN, and calibration information are definitely the right starting point. GDS2 also proves that a lot of useful ECM data can be viewed through the DLC without needing a DTC first. The question I need to test is whether the data needed for a useful GM V8 event report is actually available through the DLC, and at a useful sample rate: - misfire counts / roughness by cylinder - AFM/DFM state - oil pressure and oil temperature - fuel trims - voltage / reset context - U-codes and communication events - calibration / software information - whether these are standard PIDs, enhanced DIDs, Mode 6 data, GDS2-only data, or not available So I think the right benchmark is: 1. Build the OBD-only version first. 2. Keep it plugged in and logging locally. 3. Compare it against GDS2 / freeze frame / HP Tuners or another higher-end logger. 4. Measure which parameters are available and at what update rate. 5. Only justify ECM-side hardware if it captures useful evidence the OBD version cannot. So you may be right: the consumer product might simply be an always-plugged-in OBD event recorder with much better reporting. A question for you: when you say ELM327 devices can already deliver all the data needed, do you mean generic OBD Mode 01 data only, or GM enhanced data as well? For a useful GM V8 report, would generic OBD data be enough, or would you expect the tool to include enhanced items like misfire by cylinder, AFM/DFM state, oil pressure/oil temp, U-codes, and calibration information?

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...