Jump to content

Recommended Posts

Posted

When you think about light bulbs we know they aren't covered under warranty.  However, several of the lights on the upper level trims don't have bulbs to replace because they are LED.  For example, I have a 2020 Trail Boss LT.  From the factory the headlights, tail lights, and fog lights are all LED.  Some models, such as LTZ, High Country, and those with the Midnight Edition package also have LED turn signals.

 

Now, here's the purpose of my thread.  My left fog light is out.  I went to pull the bulb so I could get a number and be able to replace it, however I found out there's no bulb.  The light sticker plugs into the whole light assembly.  When I looked up the cost for a replacement fog light on GMPartsDirect I found no bulb listed, and the whole light assembly is over $100.  Thinking I would find the part cheaper at Rock Auto, I searched there, too.  That's when I became aware there's a core charge for the fog light of $50.  With the core charge, on Rock Auto the cost for the fog light is $166.

 

Now, if this was a simple bulb I could see event laughing and telling my to spend $2 to get a knew bulb, but that's clearly not an option.  And, half the time I use my fog lights the left light will come on.  However, a few minutes down the road and it'll start randomly flashing.  The other half the time it doesn't light up.

 

Do you think the dealer will warranty the lamp, or are they going to try selling me?

Posted

The LED fixtures are covered under 3/36.  If you look at your GMC or Chevrolet warranty tracker you will see incandescent bulbs covered for 12/12.  

Posted
14 hours ago, calgator73 said:

The LED fixtures are covered under 3/36.  If you look at your GMC or Chevrolet warranty tracker you will see incandescent bulbs covered for 12/12.  

Wow, that's pretty ridiculous, imo. I hope the LEDs last a long time based on transient's post, because 100+ to replace a 2 dollar bulb. 

Posted
4 hours ago, 1454 said:

Wow, that's pretty ridiculous, imo. I hope the LEDs last a long time based on transient's post, because 100+ to replace a 2 dollar bulb. 

There's no bulb, unless you consider the whole fog light assembly a bulb.  Imagine the outrage for a LED headlight that's $600-$1,000.

Posted
On 4/28/2021 at 12:31 AM, Transient said:

There's no bulb, unless you consider the whole fog light assembly a bulb.  Imagine the outrage for a LED headlight that's $600-$1,000.

Sorry you're correct. I mean it in the context that you can buy replacement pcb's with diodes for 5 bucks. But it's going to be a real bad day when people are starting to have to replace this stuff in the future. It's almost like they want these new vehicles to be disposable. 

Posted

Baja Designs has a very nice replacement for the factory fogs that adds double the light output.

Posted
On 4/30/2021 at 11:31 AM, EZ Money said:

Baja Designs has a very nice replacement for the factory fogs that adds double the light output.

Isn't that meant for trucks that don't already have factory fog lights?

  • 10 months later...
Posted (edited)

I suppose you might be wrong. Of course, such simple lighting as LED strips is hardly covered by the warranty because it is too small and very easy to replace (if you know how). However, it's quite possible to guarantee such a product as a bright LED spotlight for a dome or fog lights. When I bought my spotlights on vont.com, I got a three-month warranty. It was a good purchase. The light beam coming out of the spotlight was very high-quality, distant, bright. I like how it works. Why don't you ask the store employees if they have any light bulbs or spotlights subject to warranty?

Edited by JesseHiserp
  • 1 year later...
Posted

Yes! The new style General Motors vehicle front and rear headlights with the LED bulbs you cannot get to are fully covered by the 3 year 36,000 bumper to bumper warranty. I just had my rear hatchback taillight assembly replaced on our 2021 Chevy Traverse. They had it 2.5 days though due to the number of people out there now getting their vehicles repaired over buying new. So please know that this is fully covered by the warranty because there is no way to get to those bulbs and replace the individual bulbs. It’s truly sad to think of the future for a lot of people with these vehicles after warranty is up because these assembly’s to replace are between $300-$500. Isn’t it fun as time passes by in this world? Companies get smarter at taking our money. :-(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,866
    Total Members
    8,960
    Most Online
    Greg3160
    Newest Member
    Greg3160
    Joined
  • Who's Online   3 Members, 0 Anonymous, 424 Guests (See full list)

  • Latest Articles

  • Posts

    • Late reply, but yes—it works on the SLT trim. Compatibility comes down to the plastic shroud shape behind your mirror, not the trim badge itself. On the SLT with auto-dimming, it uses a plug-and-play Y-harness off the mirror/rain sensor power, so no need to run wires down to the OBD port. If anyone's ever unsure about fitment, just drop a photo of your mirror housing and we can double-check it.   Appreciate the detailed feedback on the install! On the windshield glare—we actually took feedback like yours and developed a dedicated CPL (polarizer) filter to cut down dash reflections on sunny days. If you're still running the cam, shoot me a DM. I'd be happy to send a CPL filter over for you to test out—no charge. 
    • There are no stickers in your glovebox?
    • Look at the numbers on the stickers in the door jam...
    • Yes, every time the developer updates his code, you must recompile. I will private message you with the latest because it changes pretty much with every version.
    • After I wrote that reply I went for a ride. 85 F out. So trans started at 85 F and it shifted the same as it did an hour latter at 168 F. I've never actually recorded the to cold to shift point but it is under 32 F before they start hanging on to a lower gear or leaving the converter unlocked. Both intended to heat fluid.    Yes, brake or bake. Absolutely.      Your welcome. True research ended decades ago. Field trials are still in play.    There is a thing called oxidation onset temperature. This is the heat related oxidation not the O2 exposure kind. For mineral oil that starts at 140 F. So what happens after 140 F? Each 20 F cuts fluid life in half! Does using a Full Synthetic improve that? Yes! By how much? Depends on the base oil type and a few other factors. But enough to notice. Some esters are even higher. There are even synergies between types the will raise it higher than any one component is alone.    Then there is "Hindered" oils. Antioxidant additives. Hindered Polyol Esters can sit at 500 F for years in a turbine.   When a blender brags his oil will 'take 500 F" in service he doesn't specify for how long. Water will dance on a 500 F hot plate for several seconds. @newdude put up a chart showing the relationship between fluid temperature and it's life in an automatic transmission. Here's a version of that chart for Group III based oils. These temperatures are those in the pan as observed as 'normal'. that is you drive as you do for as long as you do under what load you ask of it and whatever that temperature is this graph applies to. Flash temperatures of a few minutes isn't what his means.    Note that fluids held at a constant 240 F have a service life of only 20K miles. 220 F explains the factory exchange limit, eh? My equipment I keep under 180 F and I'm good if the cooler will hold it as low as 140 F. But that's me.   
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...