Jump to content

2019 L5P Unresolved Issues

Chris828

By Chris828
in Troubleshooting & Recalls

 Share

Recommended Posts

Chris828 Enthusiast

Chris828

Posted
Posted

Have a 2019 2500hd with the l5p and it has been a problem. Started with p1089 - fuel rail pressure performance during decel, took the dealer 5 times and me telling them to replace the fuel lines with the regulator to get that right. Now I have a p0191 fuel rail pressure sensor performance along with c0242 and u0401-71. The dealer replaced the pressure sensor and harness exactly one month ago and here we are yet again. Any help to fix this is greatly appreciated.

Chris828 Enthusiast

Chris828

Posted
  • Author
Posted

Also I should add that this is causing reduced engine power, stabilitrak and other errors as well.

  • 1 year later...
ahendri Enthusiast

ahendri

Posted
Posted

Did you ever get this problem fixed? I am battling the P1089 issue too the dealer has replaces the fuel rail pressure sensor and connector now three times and this last time it lasted 4 days before coming back on.

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
18 hours ago, ahendri said:

Did you ever get this problem fixed? I am battling the P1089 issue too the dealer has replaces the fuel rail pressure sensor and connector now three times and this last time it lasted 4 days before coming back on.

This is certainly not what we like to hear, ahendri.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your truck. To do so, please send an email to [email protected] with ATTN: ahendri/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

  • 4 weeks later...
Dave1981 New Member

Dave1981

Posted
Posted (edited)

Any good news yet? I’m having this same issue but it comes with a P20EE and a P0089 code as well. 

Edited by Dave1981
ahendri Enthusiast

ahendri

Posted
Posted
On 11/20/2022 at 10:18 AM, Dave1981 said:

Any good news yet? I’m having this same issue but it comes with a P20EE and a P0089 code as well. 

Nothing good to report. I've had it in twice since this and they cannot seem to find the issue. It's very frustrating no one seems to do any real diagnostic work anymore. They are wanting me to authorize a tear down with an 8 hour labor charge to further diagnose it, but no real resolution in sight.

  • Sad 1
  • 3 months later...
rattleman69 New Member

rattleman69

Posted
Posted
On 11/22/2022 at 6:16 AM, ahendri said:

Nothing good to report. I've had it in twice since this and they cannot seem to find the issue. It's very frustrating no one seems to do any real diagnostic work anymore. They are wanting me to authorize a tear down with an 8 hour labor charge to further diagnose it, but no real resolution in sight.

Hey bud I’ve having same issues with my truck.. have you came to a Resolution with this issue?  Thanks

newdude Senior Enthusiast

newdude

Posted
Posted
On 10/27/2022 at 5:49 PM, ahendri said:

Did you ever get this problem fixed? I am battling the P1089 issue too the dealer has replaces the fuel rail pressure sensor and connector now three times and this last time it lasted 4 days before coming back on.

 

On 11/20/2022 at 11:18 AM, Dave1981 said:

Any good news yet? I’m having this same issue but it comes with a P20EE and a P0089 code as well. 

 

19 hours ago, rattleman69 said:

Hey bud I’ve having same issues with my truck.. have you came to a Resolution with this issue?  Thanks

 

 

 

P1089 and if the dealer or someone has replaced the fuel pressure sensor and connector at the rail, its time to check for metal in the fuel system.  We've done 4 trucks with P1089 only to find the high pressure fuel pump was/is failing and sending metal throughout.  

 

That means new pump, all new hard lines at the engine, 8 new injectors, new fuel rails, in tank pump/sending unit all need to be replaced and clean out the tank, fuel lines from the tank to the engine and the fuel cooler.  

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 3/1/2023 at 6:24 PM, rattleman69 said:

Hey bud I’ve having same issues with my truck.. have you came to a Resolution with this issue?  Thanks

This is certainly not what we like to hear, rattleman69.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your truck. To do so, please send an email to [email protected] with ATTN: rattleman69/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s Privacy Policy, please visit https://www.gm.com/privacy-statement.html. The information you provide may be monitored and recorded and is subject to the GM Privacy Statement.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

  • 1 year later...
LivnWild New Member

LivnWild

Posted
Posted
On 3/2/2023 at 11:10 AM, newdude said:

 

 

 

 

 

P1089 and if the dealer or someone has replaced the fuel pressure sensor and connector at the rail, its time to check for metal in the fuel system.  We've done 4 trucks with P1089 only to find the high pressure fuel pump was/is failing and sending metal throughout.  

 

That means new pump, all new hard lines at the engine, 8 new injectors, new fuel rails, in tank pump/sending unit all need to be replaced and clean out the tank, fuel lines from the tank to the engine and the fuel cooler.  

@newdude Can you tell me how you diagnosed the high pressure pump for the p1089.  Was it able to be fixed under an extended warranty on some of them?  Same symptoms and shavings were found in the fuel filter.  Currently at the dealer for the 5th time waiting on GM tech and the engine light to come back.  They did replace the rail, sensor, and harness in past visits.  I have a 2019 2500 Duramax high country.  Thank you.  Anything helps!!:)

newdude Senior Enthusiast

newdude

Posted
Posted
15 minutes ago, LivnWild said:

@newdude Can you tell me how you diagnosed the high pressure pump for the p1089.  Was it able to be fixed under an extended warranty on some of them?  Same symptoms and shavings were found in the fuel filter.  Currently at the dealer for the 5th time waiting on GM tech and the engine light to come back.  They did replace the rail, sensor, and harness in past visits.  I have a 2019 2500 Duramax high country.  Thank you.  Anything helps!!:)

 

 

If you've got metal that's usually all the signs for the high pressure fuel pump saying goodbye.  

LivnWild New Member

LivnWild

Posted
Posted
1 minute ago, newdude said:

 

 

If you've got metal that's usually all the signs for the high pressure fuel pump saying goodbye.  

That's what i thought as well.  I guess I am wondering how I get the dealership to realize this and replace everything??  Thanks for the quick reply

  • 10 months later...
  • 3 months later...
Scott Phelps New Member

Scott Phelps

Posted
Posted

What a pain. Has anyone resolved this issue. I have a 2019 GMC 2500 Hd and am getting the P0191 fault code. I have had the dealer replace the fuel rail sensor, the pigtail, and update the computer. I have also replaced the fuel filter and MAP. I am on my third shop and no one can diagnose why my truck continues to go into limp mode without warning. It also turns on the traction light with bthe check engine light. The truck seems to run fine until it doesn't. I am seeing hundreds of people with this same issue on duramax forums and other places with no responses from GM. There is a service bulletin out suggesting replacing the fuel rail sensor and pigtail but I did that and %K miles later it's doing the same thing. Anyone have a fix?????

newdude Senior Enthusiast

newdude

Posted
Posted
15 hours ago, Scott Phelps said:

What a pain. Has anyone resolved this issue. I have a 2019 GMC 2500 Hd and am getting the P0191 fault code. I have had the dealer replace the fuel rail sensor, the pigtail, and update the computer. I have also replaced the fuel filter and MAP. I am on my third shop and no one can diagnose why my truck continues to go into limp mode without warning. It also turns on the traction light with bthe check engine light. The truck seems to run fine until it doesn't. I am seeing hundreds of people with this same issue on duramax forums and other places with no responses from GM. There is a service bulletin out suggesting replacing the fuel rail sensor and pigtail but I did that and %K miles later it's doing the same thing. Anyone have a fix?????

 

 

Injection pump or injectors.  Pull the pressure regulator off the injection pump and see how the screen looks.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      That should answer the maximum depth difference between the stock and the PPE so its not hugely lower. As to the PML pan, they don't make any claims that it fits the L8T with the same transmission and in fact leave their information confusing, however on the surface it says "for Duramax" and so its hard to say. I know a while back and not sure which brand it was that specifically stated that the extra capacity pan that particular company made did NOT fit the gas version. 
    • fondupot
      Installed Bilstein 5100's on my 2024 2500HD - Worth it - VIDEO + GIVEAWAY Inside

      By fondupot · Posted

      There are several versions of the 5100's. Some for stock height, some for leveled, some for lifted.    Side note. I finally had a chance to tow with my 30' gooseneck with about 10,000 lbs of material on it this past week. Hands down the 5100's made the trailer towing much more stable and comfortable. I even had 10 cmu blocks in the bed. What a difference over the stock shocks. 
    • Tyler Gibbs
      Correct way to service 2024 l8t allison trans?

      By Tyler Gibbs · Posted

      According to PML, the stock pan is 4.3" deep - (PML info): Dimensions: at deepest area, PML pan is 7 inches, stock pan is 4.3 inches    PPE is 5.4" so roughly 1.1" deeper than stock
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      I had not realized that PPE has come out with a version of a cast aluminum oil pan specific to being able to fit onto the 10L1000 with the L8T engine sometime this spring. I was doubting that anyone would come out with something beyond what Dorman had in more of a direct factory pan swap. I see from one comment that is on the PPE site that they found the pan to be tighter to install then the factory unit and having to flex the exhaust down to fit it. I didn't lookup any specs if they have any as per how much lower it hangs but as it holds more oil and has fins outside the pan it would no doubt hang a certain amount lower.    I looked back at the site and they do have some depth measurements to get a rough comparison to the factory pan total height or hang down if you will at the front and rear of the pan so that will give a good idea how much further down this pan would end up being for ground clearance issues.    2024-2026 GM 6.6L Gas 10L1000 Heavy-Duty Cast Transmission Pan – Pacific Performance Engineering    
    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      I'm in constant amazement over the number of people that do oil maintenance by how they feel, what they were told, what materials cost, what brand A claims vs brand B.     Come to think of it, this behavior isn't exclusive to oil. 🤔 They drive this way too. 😬   There is a 20 plus page thread on BITOG on Mobil 1 Advanced Clean vs Valvoline Restore and Protect it would be amusing if it were not so........humanly pitiful.   Last Sunday we were are sitting at services and listening to a speaker talk about Jesus parable of the wide and narrow gates and he said something that hadn't dawned on me but totally fit the way people in general are about just about everything. He said there are so few people on the narrow path leading to a good reward not because the the narrow gate was hidden or hard to find but because the wide gate leading to a bad end it so darn easy and uncomplicated to follow!!!             

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...