Jump to content

Recommended Posts

Posted (edited)
2 hours ago, Chad Kauffman said:

I'm hoping nittos do well.  I like there looks little more then the At3. Your thoughts? 

 

Looks are one thing, performance where its needed may be something else. Need to evaluate what are your needs are. Mine were more based on winter performance and with its 3-peak rating and other reviews I dug through I thought I'd give them a try and worked out pretty well, without having to get another set of tires . One true set of winter tires and another set for the rest of the year, would of went that route if these didn't work.

 

-Grover67

Edited by Grover67
Posted
1 minute ago, Grover67 said:

 

Looks are one thing, performance where its needed may be something else. Need to evaluate what are your needs are. Mine were more based on winter performance and with its 3-peak rating and other reviews I dug through I thought I'd give them a try and worked out pretty well other than having to get another set of tires . One just for winter another set for the rest of the year.  If these didn't work out I would of done that.

 

-Grover67

I think I'm gonna try the nittos and hope I don't regret it during winter months 

  • Like 1
Posted

 

20 hours ago, Chad Kauffman said:

I have but they don't got my size 275 60 20. I'd have to go up to a 285 60 20. Would that fit without any rubbing or modifications?  I also have a 2 inch lift kit 

It would EASILY fit your truck, with or without a lift.  The overall diameter would be approximately 33.5 which is well within maximum threshold values considering your stock tire is 33".

Posted
5 minutes ago, Gangly said:

 

It would EASILY fit your truck, with or without a lift.  The overall diameter would be approximately 33.5 which is well within maximum threshold values considering your stock tire is 33".

Would the 285 be alot louder compared to the 275 60 20?   Huge price difference in sizes too

Posted (edited)
2 hours ago, Chad Kauffman said:

Would the 285 be alot louder compared to the 275 60 20?   Huge price difference in sizes too

Tread pattern and tire width will dictate the level of noise you perceive.  Considering the 285/60/20 is only marginally wider than stock, I would be more concerned with tread pattern.  Read Discount tire reviews on the tires to help ascertain the noise levels compared to other tires.

Edited by Gangly
Posted
6 minutes ago, Gangly said:

Tread pattern and tire width will dictate the level of noise you perceive.  Considering the 285/60/20 is only marginally wider than stock, I would be more concerned with tread pattern.  Read Discount tire reviews on the tires to help ascertain the noise levels compared to other tires.

I'll stay with 275 60 20.  Should I go with 10 ply?or no. I don't haul anything. Or tow

Posted

10 ply will be considerably more expensive and considerably stiffer.  Since you wont be hauling anything and wont be needing to worry about puncture resistance, I would absolutely steer clear of 10 ply.

Posted
7 minutes ago, Gangly said:

10 ply will be considerably more expensive and considerably stiffer.  Since you wont be hauling anything and wont be needing to worry about puncture resistance, I would absolutely steer clear of 10 ply.

I can get XL load for like $1100.00 nittos

Posted

I had the AT3's on my 2018 Silverado and now have a set (waiting on my lift to come in) for my 21 Silverado.  The AT3's are my favorite tire that I have ever owned!  I have had BFGoodrich AT, Toyo AT2, Cooper Zeon's, Goodyears and other assorted tires on many different vehicles over the years.  The AT3's were hands down the best.  This [ast hunting season was especially muddy (Alabama) and where I hunt, I had to drive through a rutted out road that was always muddy- they grab and clear mud exceptionally well for an AT tire.  I also work in the hospital so not showing up when it snows is a No-no.  Like I said, in Alabama, we don't do snow well and definitely don't prepare for it well.  We had a decent "Alabama Snow" with a fair amount of Ice and I drove the 26 plus miles to work and back with those AT3's and I was more than impressed.  Sorry this post is so long, I have definitely become a fan boy of this tire and will run it for as long as they make it

Posted

Currently running Falken Wildpeak A/T3W for the last two years with minimal wear compared to my Nito's that seems to melt away rather faster than any other tire I've had.  Great in the snow from my usage as well.

Posted
2 hours ago, paxamus said:

I had the AT3's on my 2018 Silverado and now have a set (waiting on my lift to come in) for my 21 Silverado.  The AT3's are my favorite tire that I have ever owned!  I have had BFGoodrich AT, Toyo AT2, Cooper Zeon's, Goodyears and other assorted tires on many different vehicles over the years.  The AT3's were hands down the best.  This [ast hunting season was especially muddy (Alabama) and where I hunt, I had to drive through a rutted out road that was always muddy- they grab and clear mud exceptionally well for an AT tire.  I also work in the hospital so not showing up when it snows is a No-no.  Like I said, in Alabama, we don't do snow well and definitely don't prepare for it well.  We had a decent "Alabama Snow" with a fair amount of Ice and I drove the 26 plus miles to work and back with those AT3's and I was more than impressed.  Sorry this post is so long, I have definitely become a fan boy of this tire and will run it for as long as they make it

Great review.  I like the toyo  the tire don't seem very aggressive looking ...your thoughts on the aggressive look? 

Posted
2 hours ago, Chad Kauffman said:

Great review.  I like the toyo  the tire don't seem very aggressive looking ...your thoughts on the aggressive look? 

Can you send me a picture of your truck and tires by chance. Thank you 

Posted

I have had Duratracs, BFG AT/KO2, and Ridge Grapplers.  The Nitto's look great and are fine on both wet and dry pavement but are horrible in any sort of snow or mud.  I live in the PNW and hunt in the mountains of ID quite a bit.  The best of the bunch were the BFG's seconded by the duratracs.  I bought the Nitto's because they had the size I wanted and BFG didnt.  The Nitto have an aggressive looking sidewall but more or a street tire tread.  This is their downfall in my opinion.

Posted
1 hour ago, Josef said:

I have had Duratracs, BFG AT/KO2, and Ridge Grapplers.  The Nitto's look great and are fine on both wet and dry pavement but are horrible in any sort of snow or mud.  I live in the PNW and hunt in the mountains of ID quite a bit.  The best of the bunch were the BFG's seconded by the duratracs.  I bought the Nitto's because they had the size I wanted and BFG didnt.  The Nitto have an aggressive looking sidewall but more or a street tire tread.  This is their downfall in my opinion.

Would you recommend the toyo open country at3?  Or should I get the Falken wildpeak at3?

Posted

I was told to buy the nittos but up in Manitoba, I just Didn’t trust them for the long & brutal winters we have up here. 
Our roads and highways are in terrible shape. We have potholes big enough to take up residence in, and our snow clearing is not always done right off the hop. I needed something that I could feel safe with in the winter. I’ve had previous experience with the At2 and I liked them. My husband had Nitto trail grapplers that were not a great endorsement. They cupped and wore out rather quickly. 
 

the Toyo At3 were i stalled on our tail end of winter and I got to test them in a few blizzards and decent snow dumps and with the icy spring thaw/freeze and I was really impressed. Traction was quite shocking at how good they actually hooked on acceleration and did not slide in braking. We have a couple of intersections here they get pretty polished by yahoos ripping out of the local Canadian tire, and it’s a sheet of ice around that corner.

 

my truck came with the duratracs and the low speed him drove me bonkers and they were useless in icy conditions. 
 

the Toyos are not as aggressive looking as I would like, but I need tires that handle well in all conditions and these fit my needs best. And I went down in rim size and up on rubber to compensate best I could looks wise. I took a stab in dark and got the 285/70/17 and no rubbing, pretty sure the 305 would require trimming and/or cutting as it is close at full turn. 
 

No one here seems to run the wildpeaks but maybe its a location/availability deal???

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined
  • Who's Online   0 Members, 0 Anonymous, 1,488 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • I’m definitely interested to hear the end result here. 
    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...