Jump to content

GM Service Information Accessories Manual

Transient
 Share

Recommended Posts

Transient Senior Enthusiast

Transient

Posted
Posted

Does anybody have access to this, and are the documents something that can be shared here?

 

After waiting over a month I finally received an accessory I ordered, only to have a piece of paper inside that states, "For customer installation please request service instructions sheet from your local dealer."  The item I need installation instructions for its GM part number 84182981.  It's the numbered keypad for the driver's door.

hollywoodsle Enthusiast

hollywoodsle

Posted
Posted

Did you read the description when you bought it?

 

  • Requires installation and calibration by an authorized Chevrolet, Buick, GMC or Cadillac dealership (extra cost, see dealer for details)

 

Tools Required

Measuring Tape

Masking Tape

 

Before you start

Note: For the keypad to adhere best, the vehicle’s front door should be free of damage (dents, scratches, creases, fractures, etc.).

  1. The part and surface should be 21°C (70°F) prior to installation. The vehicle should remain 21°C (70°F) for one hour after assembly to allow adhesive to develop sufficient bond strength.
  2. Clean the area above the driver side door handle with alcohol wipe.
Programming and Mounting the Keypad to the Vehicle
  1. Take a clear picture of the wallet card to be sent to TCSC.
  2. You also have the option of scanning the QR code from the wallet card and transferring the file from your device to a PC to include in the email.
  3. Send the file and email to: TCSC ([email protected]) along with the clear picture of the Wallet Card. Make sure to include the following in the subject line: “Wireless Keypad Accessory”. Incomplete requests without all required information cannot be processed.
  4. TCSC will send you another file back. Place this file in C:\Users\your id\sps\type4.
  5. TIS2WEB should now have the “BCM Cody Control Module – Accessory only Keypad Learn” option in Supported Controllers.
  6. Using TIS2WEB Program the Keypad.
  7. Once TIS2WEB verifies the programming was successful, enter the 5 digit driver unlock code within 30 seconds. If the driver door unlocks, the Keypad was successfully entered.
  8. Verify the keypad’s functionality using the “User Instructions.
  9. Place the “User Wallet Card” and the “User Instructions” in the vehicle owner’s manual.

    Note: Questions?  Please call TCSC at 800-828-6860, press 1 for GM Accessories or press 3 for any programming issues (8AM to 8PM EST).

  10. Request for Wireless Keypad Accessory Installation
    • Dealer Code or BAC:
    • Complete 17-Digit VIN:
    • Dealership Name:
    • Technician Name:
    • Contact Phone Number:

      Note: A clear photo of the wallet card must be attached to this email.

      Note: When taking a photo of the wallet card, be sure that the photo does not have sunlight or flash glare . The glare makes the decoding process difficult for TCSC.

APPENDIX A
Procedure

  2. Starting from the driver side rear door edge (1) measure 160 mm along the door feature line (5) and position keypad (2).

    Note: Use masking tape to mark dimensions.

  3. Starting from the door feature line (4) measure down 6 mm and position top edge (3) of keypad.

    Note: Use masking tape to mark dimensions.

  4. Peel the protective liner from the adhesive backing on keypad and position to marked dimensions. Be careful not to touch the tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.

    Important: The adhesive will bond quickly to the paint. In the event that the keypad should be mis-aligned after installation, do not attempt to remove the keypad as this will cause paint damage. To avoid mis-alignment, do not drop the keypad into place. Instead, first align the top edge of the keypad to the referenced masking tape, then right outer edge to referenced masking tape. Then, toggle the keypad into place. Once the keypad is in place, press firmly on the entire surface of the keypad and then apply 15 PSI of equal pressure along the entire keypad to ensure good tape adhesion.

 
Transient Senior Enthusiast

Transient

Posted
  • Author
Posted

Yes, I read it.  I also asked questions about it here on this website.  Apparently, some info I received was incorrect.  I was told it was possible to do the install myself.  Oh, well.  It's no big deal.  My truck is going to the dealership for some warranty work and am oil change tonight.  I'll just add this install to the list of things that need to be done. 

 

Thank you for posting up the installation instructions.  I started this thread not just for this one accessory, but for those who would like the install instructions for any/all GM Accessories.  I know from experience, because my truck is practically a rolling display of the GM Accessories catalog, that most of GM's accessories don't include instructions anymore, but also don't require the dealer to do the install. 

  • Like 1
  • 5 months later...
redwngr Senior Enthusiast

redwngr

Posted
Posted
30 minutes ago, Mike and Nikki McAllister said:

This is stupid I'm not put my credit card number in for damn directions on how to install something myself 

Where did you see sending a credit card is required?

  • 1 month later...
  • 1 year later...
Guasin New Member

Guasin

Posted
Posted

GOOD MORNING. TODAY IS 06/08/23 I’M WORKING ON A 2023 ESCALADE ADDING SOME ACCESSORIES TO IT AND I CAN’T FIND THESE ACCESSORIES MANUALS. DOES ANYONE KNOW IF THEY’RE AVAILABLE NOW? THANKS. 

newdude Senior Enthusiast

newdude

Posted
Posted
30 minutes ago, Guasin said:

GOOD MORNING. TODAY IS 06/08/23 I’M WORKING ON A 2023 ESCALADE ADDING SOME ACCESSORIES TO IT AND I CAN’T FIND THESE ACCESSORIES MANUALS. DOES ANYONE KNOW IF THEY’RE AVAILABLE NOW? THANKS. 

 

 

Stop down to your dealer and ask them to print the ones you need.  

redwngr Senior Enthusiast

redwngr

Posted
Posted

You mean owner / installation manuals for accessories you've purchased or manuals showing what's available for your 23 escalade? 

 

Cadillac site shows 237 items for 2023 Escalade ESV

It also shows a discount program that depends on how much is spent...

 

https://accessories.cadillac.com/search?body=Sport Utility&bodyId=11&make=Cadillac&makeId=46&model=Escalade ESV&modelId=23452&year=2023&bodyNumDoors=5&bodyNumDoorsId=5

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Another JR
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By Another JR · Posted

      Have considered installing a DC to DC charger in your camper to replace your isolator?  
    • newdude
      Gas fill door

      By newdude · Posted

      Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...