Jump to content

Anyone with FACTORY-installed illuminated grille emblem? I need a favor please!

lapoolboy

By lapoolboy
in Modifications, Wheels & Tires

 Share

Recommended Posts

lapoolboy Senior Enthusiast

lapoolboy

Posted
Posted

Does anyone have a 2019+ truck with FACTORY-installed front illuminated grille emblem?  If so, could you please do me a favor and take a look under the hood behind the driver's side headlight to see how GM routes the emblem wiring harness out of that area and into the area behind the grille?  Also, there is a mounting clip on one of the connectors that tee into the headlight harness - where/how is this mounted?

 

Thanks so much!

hotboxn Enthusiast

hotboxn

Posted
Posted
1 hour ago, lapoolboy said:

Does anyone have a 2019+ truck with FACTORY-installed front illuminated grille emblem?  If so, could you please do me a favor and take a look under the hood behind the driver's side headlight to see how GM routes the emblem wiring harness out of that area and into the area behind the grille?  Also, there is a mounting clip on one of the connectors that tee into the headlight harness - where/how is this mounted?

 

Thanks so much!

I'm not sure if this helps, but here's the installation manual for it.  If you need one of the images blown up, let me know.  

image01-21-2022-074818.pdf

  • Like 1
lapoolboy Senior Enthusiast

lapoolboy

Posted
  • Author
Posted

Yes sir, I have the manual, but it is very vague and does not show precisely where things are located.  Thank you though!  I'm hoping someone has it as an option from the factory.

hotboxn Enthusiast

hotboxn

Posted
Posted

Does this help?  It’s the best pictures I can get to how one was routed here.  

3535413A-D13A-4AAC-B53D-E794640F60D9.jpeg

874A7134-177E-4918-86C2-A2055E85456B.jpeg

GETGONE Enthusiast

GETGONE

Posted
Posted

None of them are a factory installed. They are a dealer installed option.

  • Like 1
lapoolboy Senior Enthusiast

lapoolboy

Posted
  • Author
Posted
1 hour ago, GETGONE said:

None of them are a factory installed. They are a dealer installed option.

Ok cool.  Does anyone have pictures of a dealer-installed one?  Although, I imagine each tech probably does it his own way.

2021DENALI1500 Enthusiast

2021DENALI1500

Posted
Posted
14 hours ago, lapoolboy said:

Does anyone have a 2019+ truck with FACTORY-installed front illuminated grille emblem?  If so, could you please do me a favor and take a look under the hood behind the driver's side headlight to see how GM routes the emblem wiring harness out of that area and into the area behind the grille?  Also, there is a mounting clip on one of the connectors that tee into the headlight harness - where/how is this mounted?

 

Thanks so much!

I just installed one on my truck last week. After watching a few YouTube videos I ended up mounting the clips that are attached to the wiring harness on the metal bar that is located just above the shutters . We would all have to remove the cover located underneath the latch that opens the hood to show pictures unfortunately. Do not run the wiring harness through the shutters. Youtube is your best friend for these DYI projects. Also, I did not use the extra clip that was provided since I did not have a lot of wiring harness exposed on the headlight side. GL

Transient Senior Enthusiast

Transient

Posted
Posted

I routed mine differently than in the pictures.  I don't have my truck at the moment because it's at the dealership waiting for GM Tech to get off their rears regarding the off camber reverse camera, so I'm not able to get you pics until I get it back. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Gas fill door

      By newdude · Posted

      Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • devonthegreat
      anyone interested in a 2002 Chevy Silverado 4x4 parts truck NYC

      By devonthegreat · Posted

      **SOLD** Please end or delete post. thank you

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...