Jump to content

Keyless entry from Drivers Door

marpel
 Share

Recommended Posts

marpel Enthusiast

marpel

Posted
Posted

'22 Sierra HD, SLE.

 

Reading the manual, and not sure if I am interpreting it correctly.

 

States to unlock, using the driver's side door button, single push will unlock only driver's door, second push will unlock other doors and tailgate. Does that mean that double pressing that button, unlocks the tailgate, and is this the same as pressing the button on the tailgate? If so, how do I disable this feature so I don't open the tailgate every time I unlock the doors? The manual is not specific on this, that I can see.

 

Marv

gemarsh Senior Enthusiast

gemarsh

Posted
Posted

Correct. The button only "unlocks", not "open" the tailgate. If you lock your truck, you can not open tailgate with the tailgate buttons.

marpel Enthusiast

marpel

Posted
  • Author
Posted

Aaah, thanks for the replies. Did not realize there was an unlock-only phase to the tailgate, just figured it unlatched/opened at the same time.

 

Marv

Another JR Senior Enthusiast

Another JR

Posted
Posted
On 7/9/2022 at 7:57 AM, gemarsh said:

Correct. The button only "unlocks", not "open" the tailgate. If you lock your truck, you can not open tailgate with the tailgate buttons.

If you have the key fob close by you can open the tailgate on the locked truck, right?

Njmurvin Enthusiast

Njmurvin

Posted
Posted

 

20 minutes ago, Another JR said:

If you have the key fob close by you can open the tailgate on the locked truck, right?

That's how my 2020 works.  I also thought a single push of the button would unlock the tailgate.  But maybe it's because I'm also carrying the key fob.  I'll have to experiment with this.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,889
    Total Members
    8,960
    Most Online
    smandy
    Newest Member
    smandy
    Joined

  • Who's Online   5 Members, 0 Anonymous, 569 Guests (See full list)

  • Latest Articles

  • Posts

    • Coastie05
      2027 GMC Sierra: Official Discussion

      By Coastie05 · Posted

      Sure, but they do have some affordable options like the Trax, Trailblazer, Envista, and Encore. Some of these have a cheaper base price than the Civic, though the fuel economy isn’t as high. The main problem is that people WANT the highest trim with all the goodies and finance for like 7 years. That’s how ppl “afford” the more expensive vehicles. 
    • Jsdirt
      07 yukon xl 6.2 stalls at hot idle and wont restart

      By Jsdirt · Posted

      Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • davester
      OBD not ready?

      By davester · Posted

      Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
    • RW2018GMC
      Me too……..

      By RW2018GMC · Posted

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...