How to secure charging cables in cable channels in bench seat 2018 Silverado

[ericb2]

I'm looking for is something that will hold charging cables inside of the grooves that let the cable exit the bench seat console into the cabin where my phone is.  I want this so that it will keep my center console neat and may increase the lifespan of the cable.

 

I want to pose this question for the forum since I'm sure a solution is out there, but I've looked at Amazon, Home Depot, and Walmart and I can't find anything that I like.

 

I've attached a screenshot of where I'm looking to secure the charging cables for reference.  The cable clip (or other solution) would need to be equal to or less than 1/2 an inch wide and 5/8ths of an inch tall.

[Rock]

Foam tape? High density 1/2" thick could stick to the bottom and you could cut a slit from the top for the cords to go through. Cheap, replaceable. I might try it.

 

Edit: Google or Amazon search cable clips. Many options and ideas.

Edited September 5, 2022 by Rock
additional info

[discgolf01]

Something like these - Amazon has a ton of different sizes, or you can trim them to fit:

 

https://www.amazon.com/Drop16-Holders-Computer-Electrical-Charging/dp/B08XVZH11H/ref=asc_df_B08XVZH11H/?tag=hyprod-20&linkCode=df0&hvadid=507563721518&hvpos=&hvnetw=g&hvrand=18394585813149070488&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9032024&hvtargid=pla-1288046524040&psc=1

 

 

 

[Cupton]

16 hours ago, discgolf01 said:

Something like these - Amazon has a ton of different sizes, or you can trim them to fit:

 

https://www.amazon.com/Drop16-Holders-Computer-Electrical-Charging/dp/B08XVZH11H/ref=asc_df_B08XVZH11H/?tag=hyprod-20&linkCode=df0&hvadid=507563721518&hvpos=&hvnetw=g&hvrand=18394585813149070488&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9032024&hvtargid=pla-1288046524040&psc=1

 

 

 

Exactly what I ended up doing, only I put them on the outside. Inside could also work though.

[ericb2]

I ended up finding a solution to my issue so I wanted to share my results.  I wanted a cable clip that would fit inside the channel and would allow me to add or remove a cable from the top.  I was able to find a cable clip which would do this when mounted on the side.

 

Here's the product I used: https://smile.amazon.com/dp/B09CMMQ7V2?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

Thanks everyone for the suggestions!

[Rock]

6 hours ago, ericb2 said:

I ended up finding a solution to my issue so I wanted to share my results.  I wanted a cable clip that would fit inside the channel and would allow me to add or remove a cable from the top.  I was able to find a cable clip which would do this when mounted on the side.

 

Here's the product I used: https://smile.amazon.com/dp/B09CMMQ7V2?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

Thanks everyone for the suggestions!

 

Heck, that's perfect! Nice find.

 

What are you going to do with the other 28?