Jump to content

8L90 Transmission Operating Temperature

TruckinCountry
 Share

Recommended Posts

TruckinCountry New Member

TruckinCountry

Posted
Posted (edited)

I have a 2016 Chevrolet Silverado V8 5.3 pickup with the 8L90 transmission. What operating temperature should I be running? Just looking for feedback on standard operating temperature for daily driving with no load. Any feedback regarding transmission operating temperature is greatly appreciated. Would like to hear from some who run the 8L90 as well.

 

Background: I got a transmission shop trying to tell me that 120*F and under is normal operating temperature for a transmission with the bypass valve. Not buying it, so just gathering some information to back me up to provide when I pay them another visit. Feel free to provide your feedback on that claim as well.

Edited by TruckinCountry
Add fahrenheit, fix spelling
rav3 Senior Enthusiast

rav3

Posted
Posted

Interesting question. Check out this updated TSB from GM about changing the transmission thermostat from 90C (194f) to 70C (158f). with that said, what is normal?

The old 4 speed transmission didn't have a transmission thermostat at all. to get more MPG, GM decided to heat up the transmission fluid to make the fluid thinner. So they added a 90c thermostat on your transmission. Then the transmissions/torque converters started failing, so now the have a TB to install a lower 70c thermostat. 

Most experts will tell you that the worst thing to kill a transmission is HEAT. I did the "pill flip" on my 6L90 & mine runs between 115 to 150, depending on ambient temps, even driving in our mountains in WNC. 

In my opinion, what you guy told you is pretty correct, when not towing or hot rodding.

If I were you, I'd do the pill flip or there's a kit out there to modify the thermostat to stay open & fluid will run just like all the earlier truck transmission.

Hope this helps

 

21-NA-199 1..3 (nhtsa.gov)

  • Like 1
newdude Senior Enthusiast

newdude

Posted
Posted
2 hours ago, rav3 said:

Interesting question. Check out this updated TSB from GM about changing the transmission thermostat from 90C (194f) to 70C (158f). with that said, what is normal?

The old 4 speed transmission didn't have a transmission thermostat at all. to get more MPG, GM decided to heat up the transmission fluid to make the fluid thinner. So they added a 90c thermostat on your transmission. Then the transmissions/torque converters started failing, so now the have a TB to install a lower 70c thermostat. 

Most experts will tell you that the worst thing to kill a transmission is HEAT. I did the "pill flip" on my 6L90 & mine runs between 115 to 150, depending on ambient temps, even driving in our mountains in WNC. 

In my opinion, what you guy told you is pretty correct, when not towing or hot rodding.

If I were you, I'd do the pill flip or there's a kit out there to modify the thermostat to stay open & fluid will run just like all the earlier truck transmission.

Hope this helps

 

21-NA-199 1..3 (nhtsa.gov)

 

 

This is for 6 speed, not 8 speed.  

  • Like 1
newdude Senior Enthusiast

newdude

Posted
Posted (edited)
2 hours ago, TruckinCountry said:

I have a 2016 Chevrolet Silverado V8 5.3 pickup with the 8L90 transmission. What operating temperature should I be running? Just looking for feedback on standard operating temperature for daily driving with no load. Any feedback regarding transmission operating temperature is greatly appreciated. Would like to hear from some who run the 8L90 as well.

 

Background: I got a transmission shop trying to tell me that 120* and under is normal operating temperature for a transmission with the bypass valve. Not buying it, so just gathering some information to back me up to provide when I pay them another visit. Fell free to provide your feedback on that claim as well.

 

 

8L90 on 15-18 trucks the stock TBV is full open at 194F. 

 

If the pill has been flipped or the SureCool aftermarket TBV bypass was installed, you'd see 100-130F.  

Edited by newdude
  • Like 2
  • 1 year later...
ForestryGuy Enthusiast

ForestryGuy

Posted
Posted

Resurrecting this thread to get some answers or reassurance that I made the right choice by installing the Shift Technology STL010 kit on my 8l90. The truck is a 2018 Sierra with 103K miles. 

 

I live in southern CO, it gets cold here but also gets hot in the summer. I do a lot of driving up mountain passes and towing a 6k pound camper. Driving up to the ski area Ive been seeing temps in the 190s and occasionally getting burning smell. Trans fluid and filter were recently changed at 90k by the dealer. Had them check it out recently and they said everything is good. No shudder no hard shifts - I think it drives pretty good for a truck with just over 103k miles. 

 

We've got a trip planned for spring break where we will be towing a camper across the southwest so this afternoon I installed the Shift Technology kit to keep my temps lower and hopefully keep the trans happy for the remainder of my time with the truck. I'd keep it to 200K or more if it will make it. 

 

Driving home after the install 28F outside temps and I am seeing trans temps 103-108F. Is this too cold? Shifts were a little more noticeable but not harsh. 

 

I am worried this is too cold for the trans - I don't want to create a problem but solve a potential one. 

 

Thanks!

 

CamGTP Senior Enthusiast

CamGTP

Posted
Posted

Those temps are fine if the truck isn't being pushed. If you started being more aggressive with your driving the temps would come up. My 6 speeds runs between 110-125 in the cold months if I drive it. Stays around 145-150 in the summer with no load. Pull a trailer and it starts to rise a little but still way cooler than the factory thermostat temp that it came with, which helps with fluid life.

  • Like 2
  • Thanks 1
ForestryGuy Enthusiast

ForestryGuy

Posted
Posted

Thanks for that info. This was a chill drive home with no aggressive driving. I’ll be driving up to the ski area tomorrow so I’m hoping this prevents the burning smell. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • pyoung62
      2026 DENALI 6.2L

      By pyoung62 · Posted

      I agree with Tim.  As tech heavy as engines are these days, no way I’d be an early buyer of the new 6.6.  Of course, I bought my ‘26 Denali w/the 6.2 after dumping my Tundra with it’s defective 3.5 liter imploding engine disaster, so I’m a little gun-shy.  That said, my 6.2 has been rock solid.  I don’t drive it like I do my BMW Z4 M40i, but I don’t baby it either.  I got a V8 for a reason.  But I’m averaging 18 around town and 22 highway.  I have seen 24 highway as well when I wasn’t loaded up heavy.  Considering my Tundra with the twin turbo V6 only got 14.5 in town and 17 on the road, I’ll take the 6.2 all day, every day.  If I were you, I’d grab a ‘26 while you can.  Inventories are probably gonna start dropping and I’ll bet the deals will start looking sweeter as well.
    • ShowMeShooter1332
      Can you add a 360° Cameras hard button to a 2021 Sierra?

      By ShowMeShooter1332 · Posted

      I am curious if anyone has figured out a way to add an hard button AUX or 360 Camera switch to the center row of switches. I have a 2021 AT4, and want to split the hill decent button and add a 360 camera button so that you don't have to go into the center display and locate the camera functionality, etc...   My father's 2024 Yukon XL AT4 and it has a hard button, see below. I found this thread on the Yukons, but it seems like there may not be a part number for the 2021 sierras. https://www.gm-trucks.com/forums/topic/255339-adding-hard-button-for-camera-on-2021/ Anyone else figured this out. Seems like it would need to be a custom switch!   I am getting ready to install the auto stop/start eliminator, so would be nice to knock them out at once.     Upvote1Downvote0Go to comments
    • Grumpy Bear
      Winter Returned

      By Grumpy Bear · Posted

      Looks like the entire state is burning. 😬
    • Chuck FB
      Oil Consumption

      By Chuck FB · Posted

      Through the years it hasn't been my typical method as I tried to drop oil on an engine that was hot from having been worked, however that was not always practical and had to fire up a unit and let it warm up reasonably well and drop the oil when I had the time to do it but am referring to not only vehicles but a variety of farm equipment and highway tractors etc. However on a vehicle where one is crawling under it and the exhaust is nearby to ones body and if wanting to pull the plug without danger of being hit with boiling hot oil or attempting to remove a HOT oil filter, its sure safer and easier to not have everything smoking hot and can remove the filter right away when under the vehicle and let it all drain. Of course its not the end of the world if a bit of oil stays in the engine that might have eventually found its way out, I like to get out as much as possible but any oil changes that take place in shops would rarely be sitting around for very long at all before the plug is thrown back in and filter slapped on and oil poured in and sent out the door quick like. There would be very little time spent ( assuming they even did it ) in starting the engine with oil to fill the filter, then waiting to verify the level on the stick. A good reason to check ones oil level shortly after a shop changed the oil on a vehicle just to make sure its correct and to look under for any oil around the drain plug or filter. 
    • CPhelps
      4 Wheel Drive System

      By CPhelps · Posted

      Cool to see another Vermonter!

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...