Jump to content

Speaker upgrade

jatinderkhangura
 Share

Recommended Posts

jatinderkhangura New Member

jatinderkhangura

Posted
Posted

Hey everyone, my name is JT and I am a new GM owner here. Prior to this, I used to have an F150 lariat from 2007-2021. I just picked up my 2023 GMC Sierra Elevation w/ the 13" screen and non-bose audio last week. I am finding the audio quality from the factory paper speakers very poor and I wanted an upgrade. I purchased some 6x9 speakers (crutchfield) for the front doors and attempted to swap them today, however, realized that I do not want to cut the factory speaker plug in order to install these. Has anyone here done this install and used an adapter of some sort? I've tried googling some speaker harnesses but cannot figure out which one I need. Any help is much appreciated. 

20230327_195554.jpg

SPASierra Enthusiast

SPASierra

Posted
Posted

The front and rear door speaker adapters that Crutchfield sells for the 2019-2021 GM Trucks are plug and play. For the dash speakers you want the Metra 72-4573 adapters.  You can find them on eBay.

GETGONE Enthusiast

GETGONE

Posted
Posted

I thought Crutchfield always included plug in adapters when you purchase speakers from them.

  • Like 1
Firetiger(MN) Enthusiast

Firetiger(MN)

Posted
Posted (edited)

I used PAC SH3802 adaptors for my front door speakers. 

 

Edit:  My truck has Bose.  Not sure if the adaptors are different, FYI.  Crutchfield should be able to help you out.

Edited by Firetiger(MN)
  • 1 month later...
Russ757 Enthusiast

Russ757

Posted
Posted
On 4/3/2023 at 1:06 AM, jatinderkhangura said:

@Bikerjon I got the JL Audio C1-690x for my front door speakers

How are you liking them?  I put some jl w0s and really like how they sound. So would need the c1s (6.5 & 6x9) to have good mid sounds as that's where I'm hurting now

  • 10 months later...
JOSE29 New Member

JOSE29

Posted
Posted

What are you gonna do about your dash speakers?

specially since that's where the phone and chimes sound comes from.

 

I'm trying to upgrade from BOSE system, all 6 speakers.

  • 5 months later...
PierresRenaud New Member

PierresRenaud

Posted
Posted
On 3/31/2023 at 7:06 AM, jatinderkhangura said:

Hey everyone, my name is JT and I am a new GM owner here. Prior to this, I used to have an F150 lariat from 2007-2021. I just picked up my 2023 GMC Sierra Elevation w/ the 13" screen and non-bose audio last week. I am finding the audio quality from the factory paper speakers very poor and I wanted an upgrade. I purchased some 6x9 speakers (crutchfield) for the front doors and attempted to swap them today, however, realized that I do not want to cut the factory speaker plug in order to install these. Has anyone here done this install and used an adapter of some sort? I've tried googling some speaker harnesses but cannot figure out which one I need. Any help is much appreciated. 

20230327_195554.jpg



Au Casino Betzino, nous accordons une grande importance à nos joueurs actuels et, par conséquent, nous nous engageons à leur offrir une expérience de jeu améliorée en leur proposant des promotions spéciales et des bonus alléchants. Chaque semaine, nos joueurs peuvent bénéficier d'offres spéciales qui incluent une variété d'avantages, tels que des tours gratuits sur certaines machines à sous et des incitations pour effectuer des dépôts. Ces aides sont destinées à montrer son appréciation pour votre engagement et vous fournir plus de possibilités de gagner de l'argent. Pour vous assurer de ne manquer aucune offre, nous vous recommandons fortement de consulter fréquemment la zone de notre site Web https://crcbsl.org qui est spécifiquement consacrée aux promotions. De plus, en tant que membre de notre communauté, vous aurez accès à des promotions personnalisées qui dépendent des jeux auxquels vous aimez jouer. Nous nous engageons à vous offrir les expériences les plus agréables possibles et à vous tenir au courant des nouvelles fonctionnalités ou des jeux à venir qui pourraient être publiés. Votre satisfaction est notre première préoccupation, et nous sommes heureux de vous considérer parmi les joueurs qui ont montré la plus grande fidélité à notre marque.



Plug-and-play functionality is available for the front and rear door speaker adapters that Crutchfield offers for the 2019-2021 General Motors Trucks. It is recommended that you use the Metra 72-4573 adapters for the dash speakers. You are able to locate them on eBay.
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      I will be doing that for sure, but I need to solve who has/ where I can find a bidirectional scan tool that will support OBD 1.5. I'm kicking myself because I ebay'ed a Snap On MT2500 that I didn't think I'd ever need anymore. D'oh!! I'd rather not buy another, so I'll contact a few local shops to see if they have one and how much they'd want to do the procedure. I'd rather have the ability to do it myself... I wish there was a modern tool that could do it all, but I'd have no idea what to buy.   The theory with the pulled timing is that it mimics a rich condition. The delayed spark causes incomplete burn and the O2 sensor picks up low oxygen levels. That's interpreted as a rich condition so the PCM pulls fuel and that shows up in the deeply negative fuel trims.
    • Chuck FB
      Joke Thread

      By Chuck FB · Posted

      An ultra wealthy man had the most beautiful daughter. But, there was a problem. Everything she touched would melt in her hands. No matter what, Metal, Wood, Stone. Anything she touched would melt. She could not feed herself. Because of this, men were afraid of her. Nobody would dare marry her. Her father was despaired. What could he do to help his daughter? He consulted doctors, scientists and anybody who could solve this problem. Finally one of them said, "If your daughter touches one thing that does not melt in her hands, she will be cured." He was overjoyed and came up with a plan. The next day, he held a competition. Any man who could bring his daughter an object that would not melt in her hands would be given billions of dollars to marry her. Three extremely intelligent and handsome young men took up the challenge. The first brought a very heavy steel rod, But alas, when the she touched it, it completely melted in a matter of seconds. He sadly went away. The second brought a beautiful diamond, knowing diamonds were one of the hardest substance in the world and would not melt. But alas, once she held it in her hand, it melted. He too was sent away disappointed. So now, there was one left He was very nervous & sweating. He approached the daughter & said, “put your hand in my pants pocket and feel what is in there." She did exactly what he asked. She felt something very hard. She held it in her hand, squeezing it as hard as she could. It did not melt & remained extremely hard. Her father was overjoyed. Everybody was overjoyed. She was finally cured. Nothing never, ever melted in her hand again. They married and they both lived happily ever after, raising a wonderful family. Question: What was in the the groom’s pants pocket??? Answer below ↓ M&Ms of course! They melt in your mouth, not in your hand. What on earth were you thinking?
    • asilverblazer
      Wow I'm in a pickle. (Broke down truck) and a story.

      By asilverblazer · Posted

      There's a bunch of tea leaves that you've read, but in any case the delayed timing is unusual. Not sure how that relates to the rich at idle vs. 'normal' while driving.   If you're in this deep, might be worth investigating, and re-learning the sensor. What have you got to lose? Plus, it properly fixes the timing cover leak.
    • asilverblazer
      Wow I'm in a pickle. (Broke down truck) and a story.

      By asilverblazer · Posted

      The only problem I have seen this cause is longer crank times. 
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Injector is being sent off today for rebuild and I estimate I'll have it back in 10 days or so.   It may not be the injector...of course...now that I've torn down the intake again. But, let's rule out the injector and replace those spider legs that have been almost rubbed through.   The truck has always had negative timing and I'm reading "normal" timing at warm idle should be +16 or so. I'm negative 16 to 25 or more, and it's always been like that since I bought it.   A light turned on upstairs last night in the old noggin. Rare, I know...   This will be wild, if it turns out to be the cause!   In 2001, according to the old service documentation, the muffler was replaced. Why? I have no idea, it wouldn't have been rusted through by then. But they did a crappy job.   In 2019, another shop replaced it and noted the prior install was poorly done on the work order. "Exhaust system vibrates on crossmember". Except...I guess they just left it be? I believe the husband, the couple who were original owners, had passed by then. Maybe she said it's just not worth it to have the exhaust system fixed and declined repairs. Very few miles were driven between 2019 and 2025.   The exhaust system vibrates heavily on the crossmember and you can feel it and REALLY hear it, even today. Not always, but at idle, it gets going pretty good sometimes.   What if....   ....What if that's enough to trigger one or both of the knock sensors? Could it be tricking the sensors into sensing knock, so it's pulling timing aggressively? Pulling timing heavily means it's firing after the piston reaches full height which means incomplete burn which means the O2 sensor is sensing a rich condition, which means I've been chasing my tail, and what I thought was an inconsequential problem (janky exhaust) has been THE issue for this truck for 25 solid years?   That would be wild. Maybe it IS wild.   The service documentation thereafter, for years, shows visits for rough idle, replacing O2's, replacing the cat, replacing plugs and wires, a misfire condition, like they could never solve the issue. The injector has been replaced 4 times in 80k miles, that's just crazy.   The secondary theory....   The engine has clearly had a leak at the front seal for a very long time (the greasy trench...). I think the truck changed hands quickly ~2025 because there's Napa receipts from someone I don't recognize in the ownership history. They apparently replaced the timing cover seal, and they did a terrible job. There's RTV smeared all over and the leak I had reduced to a weep by snugging the front oil pan bolts is now a leak again.   HOWEVER....I read about replacing the crankshaft position sensor. Any time the ckp sensor is disturbed or timing cover is removed, the truck requires relearning, and that can only be done through a bi-directional scan tool. Skippy with the RTV probably didn't do the relearn procedure is my guess. His scan tool is lost in a pile of RTV goo somewhere.   So, it's very possible the sensor has been disturbed and the truck is just running on the old learn data but not setting a code for anything. The distributor has since been replaced and so has the camshaft position sensor, so all bets are off for that thing.   In the theme of one step forward, two steps back, I returned the accumulator for the AC. The gal I've been working with at O'Really's has been great. She refunded it under manufacturer's defect and we compared it to the replacement I ordered, and sure enough, the replacement is machined very differently (and a gauge actually fits on it!).   Got it home, installed it, started vacuuming it down.... and I couldn't get good vacuum.   The high side service port, where I replaced the old GM ball valve suspecting that was a source of the previous leak....well, I've clearly exposed whatever pre-existing crack in the line where the service port is welded, and made it much worse. Blessing in disguise? Except there goes another $25, now I'm waiting for a replacement AC line.   In 10-ish days ALL the parts will be here. Rebuilt injector, new exhaust system, new cat, new high pressure AC line.   Oh, did I mention the squeaking ISN'T coming from the AC pump? The truck still squeaks when started, and there were words after I started it with the new AC pump installed. But, there was more to replacing the AC pump for just a squeak. A truck with good working AC is something of value, for the comfort alone.   I've ordered a new harmonic balancer because, 30 years is a good run for one of those. Rule it out. The squeak may be something more sinister, though. I'm worried about that ckp sensor and if it was shimmed correctly, or if the timing set was installed correctly. The squeak may be coming from UNDER the timing cover.   At this point, once I get it put back together, I'm thinking I'll take a 50 mile victory lap and then promptly put it up for sale. This truck is cursed. Betty, from beyond the grave, doesn't want anyone messing with her Blazer. Or maybe she's getting revenge for 30 years of shop visits with that thing.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...