Jump to content

Recommended Posts

Posted

I have 2021 silverado 6.2 ten speed. The problem I'm having is the truck acts like it wants to stall when coming to a stop or going over speed bumps. This started after being  stopped on a hill and when I went to accelerate the truck made a loud bang under the center console. There's also a clacking noise when accelerating at times. Real problem is dealership says everything is fine. My gas mileage is down and so is power. 

Posted

Sure sounds like the transmission or torque converter. Try a different dealer and demonstrate the condition on a road test with a mechanic. Everything is not fine!

Posted

I even went through GM to schedule this appointment. It's the third time I've brought it back and I keep getting told they can't replicate it or everything is fine. Crazy how this happens pretty much everyday I drive the truck. 

Posted

No codes, no idea whats wrong IMO.

Posted (edited)

I really do feel like it's transmission related. This truck is really jerky at times and has a noticeable whine after driving for a bit. If going under 40 and take foot off gas it's almost like applying the break and if u just slightly give it some gas it will jerk you back into your seat. After driving for a while theres also a noticeable whining sound.The dealership said they are gonna drive it some more but I have no faith they will find anything.

Edited by busta350
Posted

Check your transmission fluid. Does it smell burnt? Wipe the trans. dip stick on a white paper towel or shop towel, if the fluid is clean thats a good sign. If the fluid is black or burned this points to worn clutch packs, overheating or other transmission damage. Do you keep taking your truck back to the same dealer who cannot verify or fix the problem? Have you road tested and demonstrated your complaint with a Certified Automotive Technician? I would bring your truck into a Dealer or A.S.E. certified mechanic who knows what they are doing and get your truck fixed. It seems like you are wasting your time with your dealership that cannot diagnose a drivability issue.  

Posted

Looks like I'll be having to take it to another dealership. Losing faith in Gm being able to find anything seems like they only know how to check for codes. This problem happens to me everyday but apparently not when it's at the dealership.

Posted
On 6/28/2023 at 5:43 PM, busta350 said:

Looks like I'll be having to take it to another dealership. Losing faith in Gm being able to find anything seems like they only know how to check for codes. This problem happens to me everyday but apparently not when it's at the dealership.

Make them get a tech to ride with you so you can duplicate the condition. Stop dropping it off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,914
    Total Members
    8,960
    Most Online
    AidenVorpagel
    Newest Member
    AidenVorpagel
    Joined
  • Who's Online   3 Members, 0 Anonymous, 1,307 Guests (See full list)

  • Latest Articles

  • Posts

    • 10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • 286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...