Jump to content

Recommended Posts

Posted

I have a 2005 Sierra 1500 sle 4x4. It has a bad rear axel seal that has leaked into the rear drum. I have had this abs and parking brake light on for a little while. Will the oil in the drum contaminating the components cause this warning light? I pulled the axel to replace the seal and the bearing rollers dropped out of the race so that is also bad. The area of the axel where the bearing and seal ride is chewed up a bit too so I am replacing the axel as well. But again does this problem cause the abs and Peking brake warning lights to come on?

  • Like 1
Posted

Just inside of the bearing is the ABS reluctor wheel.  Did that get damaged too?  Do you see the wire that attaches to the sensor on top of the axle tube?  Everything ok with that up to the connector near the frame?

 

At least that how it is on my trucks, 2009-2013.

Posted

No I don’t see any of what you are talking about. It is just a standard roller bearing. No wires on the axel tube. I will mention, this is a rear drum brake truck, Tow package z71.

  • Like 1
Posted

Pretty sure they will be unrelated.

 

A 2005 should only have front ABS sensors I believe. So you'd need a scan tool with ABS ability to see what is causing your codes.

  • Thanks 1
Posted (edited)

I believe the 2005 trucks had a speed sensor in the trans for the rear ABS. 

On that year truck any ABS fault would lead me to the 2 front wheel sensors being rust jacked. I fixed a bunch of those over the years. 

Edited by 64BAwagon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,778
    Total Members
    8,960
    Most Online
    daveishi
    Newest Member
    daveishi
    Joined
  • Who's Online   2 Members, 0 Anonymous, 1,098 Guests (See full list)

  • Latest Articles

  • Posts

    • Because that is IDIOTIC, much like this question. They've already been forced to do it by past administrations - why would you roll that back when it's a GOOD thing?  WHO IS ARGUING FOR LOWER MILEAGE???? 😂  NOBODY IS!!   I'm certainly not! What I want is RELIABLE vehicles again that are worth the price paid!    I don't get your logic here ...   In 2003 I paid $2,200 for our '86 Grand Marquis. It's STILL running and I've never been inside the engine, aside for the timing cover since it was leaking, so I threw a new timing set in since that makes sense. Transmission is ORIGINAL. Electric pump in the gas tank is ORIGINAL. Rear end is ORIGINAL. I'd have to hit my head REAL hard to want to pay $60k or more for a car that still can't come close to the comfort, seating and storage space, or reliability of this one. Nothing is even in the ball park! Hundreds of thousands of brands and models have been built and sent to the crusher while this one keeps on going!   https://postimg.cc/Z9XRrCSg   I've got a whole fleet of cars, motorcycles, and a truck close to this age for summer and winter. No one could pay me enough to buy anything built this century. I have zero use for any it.
    • Since I'm the one who has to fix them when they break, I'll take vehicles over 30 years old all day, EVERY day, over ANY modern crap. Have you attempted any repairs on anything built after 2006? It's a friggin nightmare, and gets worse the newer the model year.    If I had the will or desire, I can make any car of any age outside of a Model T (I don't have THAT much will ...) just as powerful, comfortable, and have all the tech the new stuff does, and get pretty close in mileage, too. I prefer SIMPLICITY. The less the vehicle has, the less to fix WHEN it breaks, not IF.   I'm glad you snot-nosed punks don't like them. More for us, plus that keeps the prices from climbing more than they already have.👍
    • Bringing this thread back on topic. I just noticed the incredible lack of bright chrome across the entire new lineup. Even the Denali has tinted the brightwork in the grille and has none elsewhere. None of them have chrome bumpers. As far as I can tell there aren't even chrome mirror caps. I'm curious if this also happens out back? Are there no chrome rear bumpers either? This is quite the departure for GMC.
    • Bringing this thread back on topic. I just noticed the incredible lack of bright chrome across the entire new lineup. Even the Denali has tinted the brightwork in the grille and has none elsewhere. None of them have chrome bumpers. As far as I can tell there aren't even chrome mirror caps. I'm curious if this also happens out back? Are there no chrome rear bumpers either? This is quite the departure for GMC.
    • Bringing this thread back on topic. I just noticed the incredible lack of bright chrome across the entire new lineup. Even the Denali has tinted the brightwork in the grille and has none elsewhere. None of them have chrome bumpers. As far as I can tell there aren't even chrome mirror caps. I'm curious if this also happens out back? Are there no chrome rear bumpers either? This is quite the departure for GMC.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...