Jump to content

Recommended Posts

Posted

For some time I have been looking for a little more rumble and sound from my 6.2 so last month I jumped the gun before doing to much research and bought a MBRP muffler delete kit.  After trying to live with this setup for a few weeks, this kit is just too much drone for me with most of my driving being highway. 

 

My question is, is there a performance muffler available that can replace the MBRP muffler delete pipe without too much modification to the existing piping? 

 

TIA,

Posted

If it's too loud, you're too old. I chopped my muffler off the 3rd day I owned my 6.2 Trail Boss. I LOVE it. Magnaflow has a couple options that bolt in in place of the cut off stock muffler.

Posted

Your local performance muffler shop should have a few options, go with a name brand and look onljne for reviews(droning) and on here perhaps before you buy.
I spent way more than  100 bucks but alas have zero drone with my Corsa, cold start is a bit harsh for my neighbors but ohh well they love that I am alert and a 2A guy so they forgive me.🤣

  • Thanks 1
Posted

Did you cut the flapper out too? I left my flapper in and I don't get any drone on my muffler delete. Driven on multiple trips, even towing a camper and nothing obnoxious. 

Posted

I cut my flapper out, even though the Magnaflow delete pipe wasn't designed for it. There's only a very specific RPM range that's about 2-300 wide where it makes an odd sound but it only lasts for a second or two when it's shifting or going into lockup. It doesn't bother me at all. Guess the sound of a loud V8 doesn't bother me as much as some people.

Posted

The longer the muffler the less drone you’ll have. I have a straight through but 30” long “totally not a Magnaflow” Jones muffler on mine and it has no drone. 

Posted
15 hours ago, GETGONE said:

If it's too loud, you're too old. I chopped my muffler off the 3rd day I owned my 6.2 Trail Boss. I LOVE it. Magnaflow has a couple options that bolt in in place of the cut off stock muffler.

 

Its not that the exhaust is too loud, but its the drone on the highway that gets to me. I am getting to old forsure!

  • Like 1
Posted
9 hours ago, jaxcam02 said:

Did you cut the flapper out too? I left my flapper in and I don't get any drone on my muffler delete. Driven on multiple trips, even towing a camper and nothing obnoxious. 

Flapper is still there.

Posted

Hey bud, I'm from NL too (Torbay). Made an account just to reply since I JUST went through this last week.

 

Just did the MBRP muffler delete last week. I noticed a TON of drone on highway as well... BUT I found a "fix". Now it's almost silent on highway cruise but deadly if you lay into it. Found it takes 2 things.

 

1) When I cut the muffler, I left the flapper valve in place but locked it open (popped the spring off, turned the valve, put spring back in last groove to keep it open). The whole point of the flapper valve is to lower the exhaust sound/drone at low rpm. I was finding most of my drone was at the 1,500-2,000 rpm range so I figured I'd try undoing the locked open mod. This helped SOME, but not all drone.

 

2) I also noticed that when I got into the throttle heavier, a lot of the drone went away - but after cruising again light throttle it would come back full force. Started playing around with how my throttle input affected it. Came to the conclusion that at the same 1,500-2,000 rpm range the drone was WILDLY different and quieter the more aggressive I was. It also seemed the higher the frequency of the engine noise, the lower the drone. Came to the conclusion from both those tests that something about the DFM dropping cylinders down from 8 made the drone WAY worse. ESPECIALLY if I was light on throttle, then started to go up an incline (almost like when it was trying to use fewer cylinders and the demand was just barely not enough to get all 8 to fire) it was like a trombone next to your head in the truck.

 

I bought a Pulsar LT, deactivated DFM, deactivated stop/start, set throttle to +30%.

 

Dude, honestly NIGHT AND DAY difference. Truck is damn near stock silent at cruise. Drone all but eliminated - sometimes it'll start to sound like it's going to hit that steady drone note (same situation where cruising and starting a slight incline - like it would need to drop a gear but not enough yet to drop down) but it never hits that steady drone sound & barely touching the throttle gets it to drop that gear & any small sign of that drone goes away.

 

Hope that helps. I had the same regret as you after doing it - now I would do my setup a 1000 times again.

 

 

  • Like 2
Posted (edited)

@Newfie1980, if you end up going the Pulsar LT route post a follow-up & let me know how it worked out. Curious if this was a one-off fix that just worked well because of my own driving style & habits, or if this would be a generic fix for anyone going the muffler delete route before I recommend to anyone else.

 

But either way, would definitely recommend the Pulsar LT for the throttle alone. Set to +30% (30mph in the settings) is the perfect sweet spot and makes a huge difference.

Edited by Lee_Newfie
words
  • Like 1
  • 6 months later...
Posted
On 8/11/2023 at 12:11 PM, Lee_Newfie said:

Hey bud, I'm from NL too (Torbay). Made an account just to reply since I JUST went through this last week.

 

Just did the MBRP muffler delete last week. I noticed a TON of drone on highway as well... BUT I found a "fix". Now it's almost silent on highway cruise but deadly if you lay into it. Found it takes 2 things.

 

1) When I cut the muffler, I left the flapper valve in place but locked it open (popped the spring off, turned the valve, put spring back in last groove to keep it open). The whole point of the flapper valve is to lower the exhaust sound/drone at low rpm. I was finding most of my drone was at the 1,500-2,000 rpm range so I figured I'd try undoing the locked open mod. This helped SOME, but not all drone.

 

2) I also noticed that when I got into the throttle heavier, a lot of the drone went away - but after cruising again light throttle it would come back full force. Started playing around with how my throttle input affected it. Came to the conclusion that at the same 1,500-2,000 rpm range the drone was WILDLY different and quieter the more aggressive I was. It also seemed the higher the frequency of the engine noise, the lower the drone. Came to the conclusion from both those tests that something about the DFM dropping cylinders down from 8 made the drone WAY worse. ESPECIALLY if I was light on throttle, then started to go up an incline (almost like when it was trying to use fewer cylinders and the demand was just barely not enough to get all 8 to fire) it was like a trombone next to your head in the truck.

 

I bought a Pulsar LT, deactivated DFM, deactivated stop/start, set throttle to +30%.

 

Dude, honestly NIGHT AND DAY difference. Truck is damn near stock silent at cruise. Drone all but eliminated - sometimes it'll start to sound like it's going to hit that steady drone note (same situation where cruising and starting a slight incline - like it would need to drop a gear but not enough yet to drop down) but it never hits that steady drone sound & barely touching the throttle gets it to drop that gear & any small sign of that drone goes away.

 

Hope that helps. I had the same regret as you after doing it - now I would do my setup a 1000 times again.

 

 

Do you have a truck with the NPP active exhaust? Just bought a 2024 High Country 6.2 and it has an active exhaust. Trying to figure out what I can do to swap a muffer on.

Posted

Drone seems to be dependent on the ears of the beholder, read many posts/forums/treads and it seems 50/50. Some swears they have zero drone where others that have done the same muffler delete can't stand the drone. Keep your muffler to revert back to if it drones.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined
  • Who's Online   0 Members, 0 Anonymous, 1,677 Guests (See full list)

    • There are no registered users currently online
  • Latest Articles

  • Posts

    • I’m definitely interested to hear the end result here. 
    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...