Leveling a 2020 Sierra 1500 Elevation

[Roxbury5]

I'm looking to level my 2020 Sierra 1500 Elevation.  Currently the front fender measures 3" less than the back from ground to fender.  By installing a 1.5" Leveling Kit, would there be any rake left?

[A Chap]

I'd post this in the 1500 group. 

[Another JR]

3 minus 1.5 equals 1.5. 

[Dunn]

i did an elevation with bilstein kit.....many ways to do it but yeah this is a HD forum

[Roxbury5]

On 1/20/2024 at 1:00 PM, Another JR said:

3 minus 1.5 equals 1.5. 

You probably needed a calculator for that one smart ass. I've read that leveling the front, lowers the rear slightly.  Looking for constructive criticism here so move along.

[vucelick]

As others have said, you will have better luck in the 1/2 ton forum.  If you raise the front, you will slightly lower the rear bumper height as the pivot point is the rear axle/tire centerline.  (Just imagine if you hooked a crane to the front end and lifted the front of the truck, eventually the rear bumper would be almost touching the ground)