Jump to content

Recommended Posts

Posted (edited)

Well guys, I’m back at doing mods to a GM truck. I went with ford for a couple years really didn’t wanted to mess with my gmc since it was perfectly fine how it was. Well the new 2024 exterior refresh came out and caught my attention and so I decided it was time update it. It is not for everyone, so people go this way some people just trade it in and both are perfectly fine so if it’s not for you don’t sweat it 🤣👍🏼. Here is my progress far.

IMG_3315.jpeg

IMG_3569.jpeg

Edited by Dbeto54
  • Like 2
Posted (edited)
3 hours ago, Crazy Canuck said:

Looks pretty authentic.  What did it cost you?

Thanks man, bumper was $400, headlights $1400 for the pair from eBay and grille $250 from a recycling place here in Houston. Just missing the hood top grille trim and fog lights. I sold my headlights and bumper for $1500 so it wasn’t too bad.

Edited by Dbeto54
Posted
4 hours ago, BuckWallace said:

Looks good! Did you have to change out any wiring or get a harness for the headlights to work, or is it just plug-n-play?

Thanks, I did had to repin a new connector and add one wire from the battery.

  • 3 weeks later...
  • 1 month later...
  • 2 weeks later...
Posted

It looks nice, i just recently purchased a 23' Silverado 2500 High Country and i was wondering if its possible to adapt the 2024 front end to it? Anybody out there has done it? 

Posted

Looks damn good. I would like to do the same to my 2020. I may have to start getting the parts to do this conversion.

  • 4 weeks later...
Posted

I’m trying to do the same thing to my 2020 Denali, 

I do have all the front end parts, except not sure how to adapt the headlights, could you please let us know exactly how you were able to adapt them? 
thanks 

Posted

What pin did you need to change in headlight? Fenders and hood are the same on 22 and 24 correct? Longs great! Any advice would be much appreciated. I’m ordering parts to do the swap. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Sounds like converting will be a bigger endeavor than I was thinking. This truck doesn't have 2Hi like the Suburban did. The Tahoe has 4Hi and 4Lo and a button to turn of traction control.   From what I understand the Stabilitrak uses open diff in the front and rear. When wheel speed is not the same the stabilitrak uses the ABS system to slowdown the spinning wheel(s) to transfer power to the slower non-spinning wheel(s). I thought the transfer case was open too. Being able to transfer power either more to front or rear depending on wheel spin. Maybe I miss understood some information with you saying and power transfer is 50-50. Thanks
    • My brother has a 2007 Avalanche with afm 5.3. It`s got 176,000 miles. Runs like a clock. Never been apart. Co worker has a 2010 Tahoe with afm 5.3. 230,000 miles. Never been apart. Runs like a clock. So, even though cyl deac is a weak spot, they can go the distance.   BUT, these engines had the oil changed regularly, AND had 5w30 as spec. I wonder if they would have lasted this far on 0w20? I`ll bet not.
    • I certainly could be wrong but I hear of pickups far newer than that 2007 cutoff which may not be going to the wrecker but are having engine work done and be that a reman engine or new engine or trying to repair the existing engine. Some of it would be design issues as per the cylinder deactivation system that GM has and one of those lifters wiping out the cam and the question of oil changes moving the needle or not on that whole mess, or in the case of Ford pickup engines that have the long timing chains and wearing them out and the roller followers and phasers and some of that certainly goes back to oil change intervals. But in those various cases the truck has all sorts of life left in it and so the unfortunate owner and may be original owner or used market owner that is pouring money into repairs so the truck is not seeing the salvage yard yet but damage is happening by infrequent oil changes. A friends son had bought a 2018 I think it is half ton GM and it had some sort of extended or used dealer warranty on it and of course the lifter issue bites and its rattling and so the dealer had to swallow the bill and was at least 7000.00 and I think they only replaced what they felt they had to replace so yeah, I can see that being a ticking time bomb in the not too distant future. Would frequent oil changes cure all these engineering "marvels", probably not but some engine designs have shown that they do much better if the oil is changed a lot more often then if the manufacturer service claims are followed. New trucks cost so much that there is an incentive to keep the existing truck on the road by repairing. 
    • get a good code reader, and find out what problems the truck has noticed by reading codes. cheap ones can only get basic engine codes, you may want to get one that can get codes from all the computers in your truck.
    • This is sort of my point, salvage yards aren't overflowing with all these 'poorly' maintained trucks - excellent/good/servicable condition otherwise, salvaged only as a result of a bad engine from poor oil change regiment.    In my area, there are no 2007 to newer gm trucks/suvs in any salvage yards. A few are in the 'recyclers' with very obvious reasons for being there - wrecked.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...