Jump to content

Recommended Posts

Posted

2020 RST

 

What needs to be added, hardware-wise to use my newly acquired camera in the LTZ grille I bought? 

 

I believe i have the IOR radio system. 8" screen, non navigation.

 

Have done Google searches, and searches here also. Some info found. But wondered if anything new has came up. 

20240809_165959.jpg

Posted
On 8/10/2024 at 9:31 PM, jashaw said:

2020 RST

 

What needs to be added, hardware-wise to use my newly acquired camera in the LTZ grille I bought? 

 

I believe i have the IOR radio system. 8" screen, non navigation.

 

Have done Google searches, and searches here also. Some info found. But wondered if anything new has came up. 

 

 

 

IOR is the 7 inch radio.

 

VPMs work with the IOS and IOt 8 inch radio, so you will likely need a new radio screen and possibly the radio as well, you will also need a video processing module, all the other cameras as there will be image faults if you don't, and then all the wiring for all the cameras.  

 

 

  • Like 1
Posted

There are 8" IOR Variants out there as well just to muddy the waters even further. Unfortunately the IOR doesnt have any provisions for extra cameras sadly. 

Posted
On 8/10/2024 at 6:31 PM, jashaw said:

2020 RST

 

What needs to be added, hardware-wise to use my newly acquired camera in the LTZ grille I bought? 

 

I believe i have the IOR radio system. 8" screen, non navigation.

 

Have done Google searches, and searches here also. Some info found. But wondered if anything new has came up. 

20240809_165959.jpg

Post up a pic with all the lights on...........😀

Posted
3 hours ago, GTPprix said:

There are 8" IOR Variants out there as well just to muddy the waters even further. Unfortunately the IOR doesnt have any provisions for extra cameras sadly. 

 

 

I'll have to scan the QR code on my door. To see the exact radio I have.

Posted
3 hours ago, newdude said:

 

 

IOR is the 7 inch radio.

 

VPMs work with the IOS and IOt 8 inch radio, so you will likely need a new radio screen and possibly the radio as well, you will also need a video processing module, all the other cameras as there will be image faults if you don't, and then all the wiring for all the cameras.  

 

 

I'll have to scan the QR code on my door to see the exact radio I have. If it's too expensive to do, which it sounds like it may be if I need all of the hardware and software programming done. Just thought since I bought a grille with the camera, i'd put it to use.

Posted
3 hours ago, johnnyquick said:

Post up a pic with all the lights on...........😀

 

353026274_10167538870080291_2545018585164735808_n.jpg

  • Like 1
Posted
3 hours ago, johnnyquick said:

Post up a pic with all the lights on...........😀

20240711_194807.thumb.jpg.8cf14db425ab5b399f2e4567821559f5.jpg20240711_194807.thumb.jpg.8cf14db425ab5b399f2e4567821559f5.jpg20240711_194807.thumb.jpg.8cf14db425ab5b399f2e4567821559f5.jpg20240711_194807.thumb.jpg.8cf14db425ab5b399f2e4567821559f5.jpg20240711_194807.thumb.jpg.8cf14db425ab5b399f2e4567821559f5.jpg

Posted
3 hours ago, johnnyquick said:

Post up a pic with all the lights on...........😀

 

20240415_063843.jpg

Posted
3 hours ago, johnnyquick said:

Post up a pic with all the lights on...........😀

 

Screenshot_20240102_123341_Instagram~2.jpg

Posted
1 minute ago, jashaw said:

20240711_194807.thumb.jpg.8cf14db425ab5b399f2e4567821559f5.jpg20240711_194807.thumb.jpg.8cf14db425ab5b399f2e4567821559f5.jpg20240711_194807.thumb.jpg.8cf14db425ab5b399f2e4567821559f5.jpg20240711_194807.thumb.jpg.8cf14db425ab5b399f2e4567821559f5.jpg20240711_194807.thumb.jpg.8cf14db425ab5b399f2e4567821559f5.jpg

 

Easy half mile of useable light. All triggered with relays by the high beam.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
    • Good evening. I was lucky enough to get passed down to me a 2007 GMC LBZ that was my great uncle's. While the underside and rockers are more or less gone I feel like with time I can restore it to working order since it only has 110,000 miles and he put nearly every option he could get without getting the new body style since he did not trust DEF. So far I have done everything I can think of but when I put the key into the ignition nothing happens. I put 2 brand new batteries in it. Cleaned the terminals. Check all the fuses and relays and they all pass with my multimeter. I know I'm missing something that I just cant think of. The only odd thing is the OBD2 port works which makes me think its not the mega fuse. Any advice would be greatly appreciated. 
    • Looks nice. I still have my 2000, 1500. Bought a 2025, 1500 for retirement. Feels solid. These trucks have a bad rap on the internet. My brother has a `24 1500, 5.3 with 52,000 miles. No problems at all. Mine hasn`t either but mine`s only at 12,700 miles. Have seen some of these things with 100,000 miles with no problems.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...