Jump to content

how to get dual function mirror lights

sierra_fox

By sierra_fox
in Modifications & Accessories

 Share

Recommended Posts

sierra_fox New Member

sierra_fox

Posted
Posted

I have a 2014 sierra that I just put towing mirrors on with the running light on the front of the mirror, turn signal in the top glass and the cargo/reverse lights. 

 

I have the turn signals and the running lights working my question is there a way to make the running light work as a turn signal without buying a fancy harness using either a diode or a relay? 

 

Also is there a reverse wire in the cab I can tap into 

Farmerman1379 Enthusiast

Farmerman1379

Posted
Posted
On 9/10/2024 at 8:05 PM, sierra_fox said:

I have a 2014 sierra that I just put towing mirrors on with the running light on the front of the mirror, turn signal in the top glass and the cargo/reverse lights. 

 

I have the turn signals and the running lights working my question is there a way to make the running light work as a turn signal without buying a fancy harness using either a diode or a relay? 

 

Also is there a reverse wire in the cab I can tap into 

I don't see why you couldn't make it dual function. It's been quite a while since I put my boostautoparts mirrors on my truck, but I would look up guides to installing their tow mirrors to figure out what wire to tap into for the signal. 

mikeyk101 Senior Enthusiast

mikeyk101

Posted
Posted (edited)

On my tow mirrors, I have an added harness that makes that amber front light do exactly what you want. Full time running light until turn signals are activated. Not sure why it doesn't do this right from factory. The person that has probably the most knowledge on this is Phil Gamboa @pgamboa and you might try reaching out to him. He has a site where he sells all kinds of harnesses to install mods on these trucks. His site is https://harnessdr.com

If you have a Facebook acct, have had the best success reaching him in Facebook Messenger and he is using his HarnessDr handle on Facebook. https://www.facebook.com/HarnessDR/

Edited by mikeyk101

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,894
    Total Members
    8,960
    Most Online
    TopBo
    Newest Member
    TopBo
    Joined

  • Who's Online   3 Members, 0 Anonymous, 1,537 Guests (See full list)

  • Latest Articles

  • Posts

    • 81mmcat
      Higher oil pressure after DFM shut off

      By 81mmcat · Posted

      Can anyone explain why the oil pressure runs higher after the DFM is shut off?  just installed the Pulsar Lt.
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      Thanks!  I figured as such; GM and other manufacturers have used standard parts and harnesses across trim levels and such for decades.  I pulled the blank accessory cover off of my commuter van (a 2016 or so Chevy 15-passenger) years ago and found the plug for a USB outlet.  It wasn't connected to anything, though (I tried swapping in an outlet from another van).  I was a GM Tech years ago (late-90s) and was pretty familiar with my 2006.  I might be wrong, but I view newer vehicles (pretty much anything made in the past 20 years) as being a lot more plug and play.  Meaning, more unused wires and plugs unless you have the Mack Daddy of vehicles.    
    • Coastie05
      It's Been a Long Time...

      By Coastie05 · Posted

      Welcome back!
    • davester
      New to Me 2010 SLE (Quirks, Issues)

      By davester · Posted

      not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...