Jump to content

Recommended Posts

Posted

Another thing I have going on with my '97 K1500 is with the brake pedal / brakes....

 

I have had the rotors and pads replaced recently due to rotors being warped / untrue.

 

The issue was present before and after this.

 

When I brake...the pedal has a pulse / tempo feel.  It doesn't go to the floor or seem hard to press.

 

I have to press the pedal more for it to stop the pulsing but that makes the truck stop much quicker which isn't always needed.

 

I did replace the booster a few years back, but I don't remember this issue being present before or after that part change.

 

Posted
5 minutes ago, bcrooms said:

Another thing I have going on with my '97 K1500 is with the brake pedal / brakes....

 

I have had the rotors and pads replaced recently due to rotors being warped / untrue.

 

The issue was present before and after this.

 

When I brake...the pedal has a pulse / tempo feel.  It doesn't go to the floor or seem hard to press.

 

I have to press the pedal more for it to stop the pulsing but that makes the truck stop much quicker which isn't always needed.

 

I did replace the booster a few years back, but I don't remember this issue being present before or after that part change.

 

 

 

When's the last time you've had the rear brakes checked?  

 

Typically if the pulsation is only in the pedal, its from the rear brakes.  If its shaking at the wheel its the front.  

Posted
6 minutes ago, newdude said:

 

 

When's the last time you've had the rear brakes checked?  

 

Typically if the pulsation is only in the pedal, its from the rear brakes.  If its shaking at the wheel its the front.  

The rear drums and shoes were check at the same time the front rotors and pads were changed.  They did change the drums but the shoes weren't worn enough to change....?

Posted
1 hour ago, bcrooms said:

The rear drums and shoes were check at the same time the front rotors and pads were changed.  They did change the drums but the shoes weren't worn enough to change....?

Was the check just shoe life or drum roundness?

 

Its not the ABS kicking in is it?

Posted (edited)
1 hour ago, asilverblazer said:

Was the check just shoe life or drum roundness?

 

Its not the ABS kicking in is it?

Both were checked.  Drums were out of round enough to need replacement according to the guy that inspected.  Shoes looked almost new...

It could be the ABS system on the fritz.

The truck will hop like a rabbit at times due to the brakes.

Has a grab, release, grab, release, feel even when apply the brake steadily.

Edited by bcrooms
Posted

Try clamping 1 brake hose off at a time and take it for a test drive, that may help you determine which wheel is the culprit, 

  • 1 month later...
Posted

Could this be an issue with worn out wheel cylinders on the rear?

 

Posted

No, a worn out wheel cylinder would just leak brake fluid UNLESS the truck sat for a long time in which case the pistons in the cylinders could be binding from corrosion so maybe, but it wouldn't cause a catch and release. Wheel cylinders are cheap so it wouldn't hurt to check

Posted

It's always had this intermittent brake bounce.... the last guy that changed the front rotors/pads and rear drums said it was as good as its gonna get for my truck...which I dont believe is true.  I should have smooth braking if all the brake components are operating as they should, right?

Posted
3 minutes ago, richard wysong said:

yes

 

It hasn't been smooth for quite a while.  I thought the last guy would be able to resolve it...but no different.

Posted

Have you determined whether it's the fronts or the rears causing it? to eliminate the ABS possibility, pull the fuse ,if it still does it clamp off 1 brake hose at a time to try to determine the offending wheel. I wonder if the "like new shoes" could be the wrong shoes, There were MANY brake options for those trucks

  • 3 weeks later...
Posted
On 1/22/2025 at 11:02 AM, richard wysong said:

Have you determined whether it's the fronts or the rears causing it? to eliminate the ABS possibility, pull the fuse ,if it still does it clamp off 1 brake hose at a time to try to determine the offending wheel. I wonder if the "like new shoes" could be the wrong shoes, There were MANY brake options for those trucks

 

I would say the rear is the cause for the hop.  The fronts only have a grab/release pattern.

  • 2 weeks later...
Posted

I can see and feel the rear of the truck bouncing up and down at times when I apply the brakes. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,879
    Total Members
    8,960
    Most Online
    Bert 22
    Newest Member
    Bert 22
    Joined
  • Who's Online   2 Members, 0 Anonymous, 776 Guests (See full list)

  • Latest Articles

  • Posts

    • I’ve heard similar complaints from newer vehicles where the factory “premium” systems don’t always live up to expectations. A good installer should be able to improve the sound without turning it into a bass-heavy setup. I’d look into upgrading the front speakers, adding a quality DSP amplifier, and possibly improving sound deadening first—those changes usually make a much bigger difference than just adding a subwoofer. Hopefully someone local can recommend a reputable installer in the Las Vegas/St. George area.
    • Do you remember that Harley Davidson was more successful (solvent) when it produced about 60% of the market demand (by design) and forced wait times of up to three years? Even when your turn came around it was, "Take what we are giving you or move to the back of the line and start over". HUGE markup's were 'normalized' and dealer killed. 40% markup and no floor plan? What's not to love? Greed will kill them yet. They have surplus production and customer base is tanking. And still they think nosebleed pricing will work.  
    • The engine was done as part of the 6.2 recall?   You'd have to see if your VIN also has the 6.2 engine special coverage on it.  Coverage number is N252494003.  If you have this, your engine is covered under this and NOT the GM replacement part engine warranty which is 3yr/100k from the date of install.  The 3yr/100k mi warranty is in effect for non warranty purchases.     This is not any different if it was replaced under warranty without a recall or special coverage.  So if you had a 5.3 and it popped at 3 years in at 50,000mi during the 5yr/60k powertrain, the replacement engine would not get the 3yr/100k, and instead gets the remainder of the 5yr/60k as coverage.     So N252494003 gives 10 years or 150,000mi of coverage, which ever comes first, starting at the vehicle in service date.  So if your in service date is 01/01/2022, N252494003 gives you special coverage of the engine until 01/01/2032 or 150,000mi, whichever comes first.  So if your start date was 01/01/2022, you'd have left 5 years and 4 months (lets round to august 1st), or 62,000mi left of coverage.   So you need to know your in service date to know how much coverage is left.  
    • Okiee dokie there bud, way to take things to the extreme.   I guess you missed the whole point and take things way to serious. I installed different EV6 style injectors that just so happen to be larger in my car running the same LQ4 engine and with a better spray pattern than the stock style injectors and I noticed no difference in the idle quality. Kinda was my round about way of saying that even if you put the same size but better style injectors in your truck, you will likely see the same thing.    I'm sure you're great to have conversations with in person if that's how you act through a keyboard. One little things sets you off and now I guess my dick is all up in your face.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...