Leveling the front end

[2000 GMC]

I want to level the front end of my Sierra.  I don't want to cank the torsion bars and found these.  Any one ever try this leveling kit?

 

http://www.hill4wheeldrive.com/cgi-bin....9418692

[nonstop]

There using Ford Torsion bar keys.

You get them yourself alot cheaper at your local ford dealer.

 

Follow this link, for a part number.

http://www.gm-trucks.com/cgi-bin....;t=9038

 

They're the same for both sides, also check out this thead aswell.

http://www.gm-trucks.com/cgi-bin....t=10276

[Big Bert]

OK OK  I have read through all the threads on the Ford Keys but I have seen the Question asked but not really answered. Let me take a stab at it.  I have a 2000 2500 4x4 and I have cranked the torsion bars up to gain 1 inch.  Can I buy the Ford keys as well to gain some more inches?  Would they be the same ones you guys are getting or would I get the ford F-250 Keys.   What year ford keys?  sorry to ask a Question so close to one that has been asked a million times but I would love to know the answer. Thanks for any replies

[robz71]

I don't know if you can use the Ford keys or not on a 2500 but Hill4wheeldrive.com has different keys for the 2500's. Who knows if they came from Ford. You could buy heavier tbars that will help level the truck out. They are a little more $$$ but is probably a better way to go.

[nonstop]

the only thing i could advise is to go to your dealer and get the part numbers for the torsion bar adjusters for both a 1500 and a 2500.

 

You'll know 4 sure then.